Prospective Students
عربي | فارسی | TR | Русский
E-Mail ÜBYS Blackboard Academic Calendar COVID-19

ARAMA SONUÇLARI

☰ Menu

Department of Mechanical Engineering

Publications

Articles published in the International Journal Hekeml

M. printer, O. Çomaklı, T. orphans AF orphans A. Steel, The Effect of Plasma Nitriding temperature on the electrochemical and semiconducting properties of thin passive films formed on 316L stainless steel implant material in SBF solution, Surface and Coating Technology, 261, 181-188, 2015.

AF orphans, M. printer, Wear Resistance and Non-Magnetic Layer Formation on 316 Implant Material with Plasma Nitriding Journal of Bionic Engineering, 11 (4), 620-629, 2014.

A. Steel, M. Lion, AF orphans, Ö. Flag, Wear behavior of Plasma Oxidized Co CrMo Alloy under Dry Conditions and Simulated Body Fluid Journal of Bionic Engineering, 11 (2), 303-310, 2014.

F. Stars AF orphans, A. Alsar, A. Steel, Performance of plasma sprayed Al 2 O 3  coating in Bio-Simulated Environment, Metal Science and Heat Treatment, 55, 504-508, 2014.

AF orphans, H. Kovac, M. Leo, A. Celik, The Effect of Magnetic Field on the Wear Properties of a Ferromagnetic Steel, Wear, 301, 636-640, 2013.

F. Stars AF orphans, A. Alsar, A. Steel, Rel. Slip, Rel. Efeoğlu, Plain and fretting fatigue behavior of Ti6Al4V alloy coated with TiAlN thin film Tribology International, 66, 307-314, 2013.

Afyet I, I. Efeoğlu, A. Steel, Alsar A., I.. Non-slip, Deposition and Adhesion Characterization of Ti (BN: MoS 2 ) Based Composite Thin Films Prepared by Unbalanced Magnetron Sputtering Closed-Field, adhesion Journal of Science and Technology, 25, 1497-1505, 2011

f.yıldız, I afyet, a.alsar that, a.çelik, fretting fatigue properties of plasma nitrided stainless steel AISI 316 L: Experiments and finite element analysis, Tribology International, 44, 1979-1986, 2011.

Afyet, Investigation of wear behavior of titanium oxide films produced by anodic oxidation on commertially pure titanium, Surface and Coating Technology, 205, 6, 1757-1763, 2010.

I afyet, a.alsar that, a.çelik, Improving tribological properties of Ti6Al4V alloy with duplex surface treatment, Surface and Coating Technology, 205, 2, 320-324, 2010.

ö.bayrak, I afyet, a.alsar that, a.çelik, determination of plasma nitrided Fatigue life medical grade CoCrMo alloy Fatigue & Fracture of Engineering Materials & Structures, 33, 303-309, 2010.

AF orphans, A. Alsar, A. Steel, Investigation of Tribological and Electrochemical Properties of Low Temperature Plasma Dual Layer After Carbo-Nitriding, Surface Engineering, 26, 3, 178-184, 2010.

AF orphans, A. Alsar, A. Steel, Rel. Efeoğlu, Corrosion behavior of Ti-DLC deposition on pre-nitrided 316L stainless steel and alloy Ti6Al4V, Corrosion Engineering, Science and Technology, 46, 439-444, 2011.

AF orphans, F. Yildiz Y. Vangölü A. Alsar, A. Steel, Several Plasma Diffusion Processes for Improving Wear Properties of Ti6Al4V Alloy Wear, 267, 2179-2185, 2009.

F. Yildiz, the AF orphans, a.alsar that, ı.efeogl of Wear and Corrosion Behavior of Various Medical Grade Titanium Alloy Surface Treated in Bio-simulated Environment, Wear, 267, 695-701, 2009.

Orphan AF, A. Alsar, İ. Efeoğlu, A. Steel, a comparative study: the effect of surface treatments on the tribological properties of Ti-6Al-4V alloy, Surface and Coating Technology, 202, 2428-2432, 2008. 

F. Stars AF orphans, A. Alsar, A. Steel, Plasma Nitriding orthopedic behavior of Ti6Al4V alloy Surface and Coating Technology, 202, 2471-2476, 2008.

A. Steel, Ö. Flag, A. Alsar, İ. Non-slip, AF orphans, Effects of Plasma Nitriding on mechanical and tribological properties of CoCrMo alloy, Surface and Coating Technology, 202, 2433-2438, 2008.

I. Efeoğlu, Ö. Bar, AF orphans, S. Altintas, Tribological Characteristics of MoS2 solid lubricant films in different tribo-Nb-testing conditions, Surface and Coating Technology, 203, 766-770, 2008.

AF orphans, F. Yildiz, A. Alsar, A. Steel, Surface modification of 316L stainless steel with plasma Nitriding, Kovov Materialy, 46, 105-115, 2008.

M. Karak, AF orphans, A. Steel, A. Alsar that, Effect of Plasma Nitrocarburizing on Fatigue Behavior of AISI 1020 Steel Kovov Materialy, 46, 173-178, 2008.

A. Celik, Y. Arslan, AAF orphan, I Efeoğlu, Fatigue behavior of duplex is treated AISI 316L stainless steel, Kovov Materialy, 45, 1, 35-40, 2007.

M. Karak, AF orphans, A. Steel, Comparison of the microstructure and tribological behavior of plasma nitrided AISI 4140 steel and nitrocarburized, Kovov Materialy, 44, 3, 139-144, 2006.

A. Steel, AF orphans, A. Alsar, MI Karakan, Effect of Magnetic Treatment on Fatigue Life of AISI 4140 Steel Materials and Design, 26, 700-704, 2005.

A. Alsar, İ. Non-slip, A. Steel, AF orphans, M. Karakan, the repair process of fatigue damage with plasma Nitriding, Surface and Coating Technology, 186, 3, 333-338, 2004.

Akpinar S., Clean S., Aydin MD and Private A. (2012), "Effect of protrusion at the ends of Bondla to in single lap joints under tension and bending",  Journal of Adhesion Science and Technology, 26, 2591-2602.

Q. clean, Akpinar S., MD and Private Aydin A. (2013), "Increasing Single Lap Joint Strength by Adherend Curvatura-Induced Residual Stresses",  Journal of Adhesion Science and Technology,  27, 244-251.

Akpinar S., Aydin MD, Clean and Private S. A. (2013), "3-D Non-Linear Stress Analysis on the adhesively bonded with T-Joints Supports Embedded,"  Composites Part B,  53, 314-323.

Akpinar S. (2013), "Effects of Laminate Carbon / Epoxy Composite Patches on the Strength of Double-Strap Adhesive Joints: Experimental and Numerical Analysis",  Metarials and Design , 51, 501-512.

Akpinar S. (2013), "Effects of Different Curvature Patches on the Strength of Double-Strap Adhesive Joints",  The  Journal of Adhesion,  89.937-947.

Akpinar S., Doru MO, Private A. Aydin MD and Ghaffarzadeh HJ (2013), "The Effect of the Spew Fillet on an adhesively bonded Single-Lap Joint was subjected to Bending Moment",  Composites Part B,  55, 55-64 .

Akpinar S., MD and Private Aydin A. (2013), "A study on 3-D DISTRIBUTIONS stress in the bi-adhesively bonded T-Joints", Applied Mathematical Modeling, 37.10220 to 10,230.

Akpinar S. (2013), “The Effect of Composite Patches on the Failure of Adhesively-Bonded Joints Under Bending Moment”, Applied Composite Materials,20,1289-1304.

Doru M.O., Ozel A., Akpinar S. and Aydın M.D. (2014), “The Effect of the Spew Fillet on Adhesively Bonded Single-Lap Joint Subjected to Tensile Loading: Experimental and 3-D Non-Linear Stress Analysis”, TheJournal of Adhesion,90,195-209.

Gultekin K. Akpinar S. and Ozel A. (2014), “The Effect of the Adherend Width on the Strength of Adhesively Bonded Single-Lap Joint: Experimental and Numerical Analysis”, Composites Part B, 60, 736-745.

Aydın M.D. and Akpinar S. (2014), “The Strength of the Adhesively Bonded T-Joints with Embedded Supports”, International Journal of Adhesion & Adhesives, 50,142-150.

Ozel A., Yazici B., Akpinar S., Aydın M.D. and Temiz S. (2014), “A study on the strength of adhesively bonded joints with different adherends”, Composites Part B, 62,167-174.

Akpinar S. and Aydın M.D. (2014), “3-D Non-Linear Stress Analysis on the Adhesively Bonded Composite Joint Under Bending Moment”, International Journal of Mechanical Science, 81,149-157.

Akpinar S. (2014), “The strength of the adhesively bonded step-lap joints for different step numbers”, Composites Part B, 67,170-178.

Gultekin K. Akpinar S. and Ozel A. (2015), “The Effect of Moment and Flexural Rigidity of Adherend on the Strength of Adhesively Bonded Single-Lap Joints”, The Journal of Adhesion, 91, 637-650.

Yıldız. F. “Tribological properties of WC-12Co coating on AZ91 magnesium alloy fabricated by high velocity oxy-fuel spray”, High Temperature Materials and Processes, DOI: 10.1515/htmp-2013-0018 (2014).

Yıldız. F. “The effect of different strain energy functions o rubber fender: Experiment and finite element simulation”, Journal of Elastomers and Plastics, DOI: 10.1177/0095244313489912 (2014).

Yıldız. F. Ve A. Alsaran. “Multi-pass scratch test behavior of modified layer formed during plasma nitriding”, Tribology International, 43/8, 1472-1478 (2010).

Yıldız. F., A. Alsaran., A. Çelik. Ve İ. Efeoğlu. “Multi-pass scratch test behaviour of TiAlN thin film deposited on 316L stainless steel and Ti6Al4V alloy by dc biased and pulsed magnetron sputtering”, Surface Engineering, 26, 578-583 (2010).

Alsaran. A., F. Yıldız. Ve A.Çelik. “Effects of post-aging on wear and corrosion properties of nitrided AISI 4140 steel”, Surface and Coatings Technology, 201/6, 3147-3154, 2006.

A. Alsaran, G. Pürçek, İ. Hacısalihoğlu, Y. Vangölü, Ö. Bayrak, İ. Karaman, A. Çelik. “Hydroxyapatite production on ultrafine-grained pure titanium by micro-arc oxidation and hydrothermal treatment” Surface & Coatıngs Technology. 205, 537-542 (2011)

Albayrak, Ç., Hacısalihoğlu, İ., Vangölü, S.Y., Alsaran, A., “Tribocorrosion behavior of duplex treated püre titaniumin Simulated Body Fluid ” Wear. 302, 1642- 1648 (2012)

Sahin, B. Manay, E. Ozceyhan, V. 2014. Overall heat transfer enhancement of triangular obstacles, International journal of Automotive and Mechanical Engineering, Accepted for publication

Manay, E. Ozceyhan, V. Sahin, B. Gunes, S. 2014. Edge length effect of bluff bodies on flow structure, International journal of Automotive and Mechanical Engineering, Accepted for publication.

Omeroglu, G. Comakli, O. Karagoz, S. Manay, E. 2013. Forced convective two phase flow analysis in a circular tube equipped with twisted tapes. Energy Education Science and Technology Part A: Energy Science and Research,  31(1):73-86.

Manay, E. Sahin, B. Yilmaz, M. Gelis, K. 2012. Thermal Performance Analysis of Nanofluids in Microchannel Heat Sinks, World Academy of Science, Engineering and Technology, 67:87-92.

Manay, E. Gunes, S. Akcadırcı, E. Ozceyhan, V. Cakır, U. Comaklı, O. 2011. The Prediction Of Heat Transfer And Fluid Characteristics For Equilateral Triangular Bodies In Tandem Arrangement By Artificial Neural Networks, Gazi University Journal of Science, 25(2): 505-517.

Manay, E. Gunes, S. Akcadırcı, E. Ozceyhan, V. 2010. Numerical Analysis of Heat Transfer and Pressure Drop in a Channel Equipped with Triangular Bodies in Side-By-Side Arrangement, The Online Journal on Power and Energy Engineering (OJPEE). 1(3):85-89.

Ulusal Hakemli Dergilerde Yayınlanan Makaleler

A. Fatih Yetim, Mevra Aslan, Fatih Yıldız, İlyas Hacısalihoğlu, Özgü Bayrak, CoCrMo İmplant Alaşımının Plazma oksidasyon İşlemi İle Aşınma Direncinin İyileştirilmesi, Mühendis ve Makina, 328, 37-43, 2012.

Y. Totik, A. Alsaran, A. F. Yetim, İ. Efeoğlu, Plazma ile nitrürleme ve mangan fosfat kaplama işleminin AISI 5140 çeliğinin aşınma davranışı üzerine etkisi, Mühendis ve Makina, 50, 595, 34-38, 2009.

M. Karakan, A. Alsaran, A. Çelik, A. F. Yetim, Plazma Nitrokarbürleme,  MakinaTek, 84, 138-142, 2004.

A. Alsaran, A Çelik, , M. Karakan, A. F. Yetim,  Yüzey mühendisliğinde yeni bir yaklaşım; dubleks yüzey işlemi, Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 9, 1, 1-7 2003.

Akpinar, S. and Aydın M.D. (2012), “Yapıştırıcıyla Birleştirilmiş T Bağlantı Tipinin İki ve Üç Boyutlu Gerilme Analizi ”, EÜFBED Fen Bilimleri Enstitüsü Dergisi, Cilt-Sayı: 5-2, s.229-241.

Pürçek, G., Saray, O., Hacısalihoğlu, İ., Karaman, İ., Alsaran, A., “Yüksek Dayanımlı ve Biyouyumlu İmplant Üretiminde Yeni Bir Yaklaşım: Aşırı Plastik Deformasyon ve Yüzey İşlemleri,” TMMOB MMO Mühendis ve Makina Dergisi, 53/628, 50-60. (2012)

Manay, E. Sahin, B. Akyürek, E.F. Çomaklı, Ö. 2012. Mikrokanallarda Nanoakışkanların Kullanımı, Mühendis ve Makine, 53 (627): 38-42.

Uluslararası Bildiriler

F. Yıldız, A. F. Yetim, A. Alsaran, A. Çelik, İ. Kaymaz, Plain and Fretting Fatigue Behavior of Ti6Al4V Alloy Coated with TiAlN Thin Film: Experimental and Theoretical Study, IMMC’15 International Metallurgy&Materials Congress, İstanbul, Türkiye, 2010.

M. Karakan, F. Bülbül, A. F. Yetim, A. Çelik, Plazma Nitrokarbürleme Sonrası Yüzey Topografyasındaki Değişimlerin Araştırılması, 11. Uluslararası Denizli Malzeme Sempozyumu, 2006.

İ. Efeoğlu, F. Bülbül, E. Arslan, M. Karakan, A. F. Yetim, MoS2-Ti Katı Yağlayıcı İnce Film Kaplamalar, 11. Uluslararası Denizli Malzeme Sempozyumu, 2006.

A. F. Yetim, M. Karakan, A. Alsaran, A. Çelik, İ. Efeoğlu, AISI 316L Paslanmaz Çeliğinin Plazma İle Nitrürasyon Davranışı, 11. Uluslararası Denizli Malzeme Sempozyumu, 2006.

A. Alsaran, M. Karakan, F. Yetim, A. Çelik, Plazma ile ostenitik nitrokarbürleme sonrası farklı soğutma ortamlarının yapısal ve tribolojik özelliklere etkisi,3. Uluslararası İleri Teknolojiler Sempozyumu, 283-291,2003.

Aydın M.D., Temiz, S., Akpinar, S., Ozel, A., “3-D Non-linear Stress Analysis on the Adhesively Bonded Single-lap Composite Joınts Under a Bending Moment”, ACE-X 2011Algavre,Portugal.

Akpinar, S., Aydın, M.D., Ghaffarzadeh Jahanpasand, H., Yazıcı, B., Ozel, A. and Temiz, S., “The Effect of Composite Adherends and Aluminum Adherends of Different Thickness on Failure Load of Adhesively Bonded Single-Lap Joints”, AB-2013FEUP Porto, Portugal.

Acar V., Gultekin K., Akpinar S., Oner G.A., Akbulut H., Ozel Adnan., ‘Effect Of Graphene Nanocomposite Adhesives On The Strength Of Adhesively Bonded Single-Lap Joint’, ICCE-22-2014-Malta.

Oner G.A., Akpinar S., Gultekin K., Acar V., Ozel Adnan., ‘Effect Of Carbon Nanotube Added Adhesive On The Strength Of Adhesively Bonded Joint’, ICCE-22-2014-Malta.

Gultekin K., Ozel Adnan., Akpinar S., Ghaffarzadeh H.J., Oner G.A., ‘A Study On The Strength Of Nanoadhesively Bonded Joint Subjected To Bending Moment’, ICCE-22-2014-Malta.

Sahin, B., Manay, E., Gelis, K., Mandev, E., Effect Of Base Fluid types on thermal properties of different nanofluids, First termal and Engineering Summer Conferance 9-12 August,2015,New York,NY,USA

Gelis, K., Sahin, B., Manay, E., Mandev, E., Convective Heat Transfer Of Nanofluids In A Concentric Circular Tube, First termal and Engineering Summer Conferance 9-12 August,2015,New York,NY,USA

Manay, E., Sahin, B., Gelis, K., Mandev, E., Thermal And Hydrodynamic Analysis Of Nanofluids At Low Concentrations In A Microchannel Heat Sink, First termal and Engineering Summer Conferance 9-12 August,2015,New York,NY,USA

Sahin, B., Manay, E., Ozceyhan, V. Overall heat transfer enhancement of triangular obstacles, The 2nd International Conference on Mechanical Engineering Research 1-3 July 2013, Kuantan/Pahang, Malaysia.

Manay, E. Ozceyhan, V. Sahin, B. Gunes, S. Edge length effect of bluff bodies on flow structure, The 2nd International Conference on Mechanical Engineering Research 1-3 July 2013, Kuantan/Pahang, Malaysia.

Manay, E. Gunes, S. Akcadırcı, E. Ozceyhan, V. Comakli, O. An experimental study of fluid behaviour in a channel flow past two triangular blockages: comparison of tandem and staggered arrangement, Thermal and Environmental Issues in Energy Systems, May 16-19, 2010, Sorrento, Italy.

Manay, E. Gunes, S. Ozceyhan, V. Comakli, O. Akcadırcı, E. A numerical study of heat transfer and pressure drop in a channel flow past two triangular bodies: comparison of tandem, staggered and side by side arrangement, HEFAT 2010 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 19-21 July 2010 Antalya, Turkey.

Manay, E. Gunes, S. Akcadırcı, E. Ozceyhan, V. Comakli, O. Research on the effect of gap ratio between dual triangular blockages over flow characteristics using PIV, HEFAT 2010 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 19-21 July 2010 Antalya, Turkey.

Manay, E. Gunes, S. Akcadırcı, E. Ozceyhan, V. Numerical Analysis of Heat Transfer and Pressure Drop in a Channel Equipped with Triangular Bodies in Side-By-Side Arrangement, 2009 World Congress on Power and Energy Engineering, WCPEE'09 (INFOMESR), Cairo, Egypt.

Kotcioglu, I., Manay, E., Caliskan, S., Time dependent turbulent flow and heat transfer characteristics in plate-fin type cross-flow heat exchanger, 2008 Global Conference on Global Warming, July 6-10, Istanbul, Turkey.

Kotcioglu, I., Caliskan, S., Manay, E., Investigation of efficiency in a cross-flow heat recovery unit equipped with CDLVGs, 2008 Global Conference on Global Warming, July 6- 10, Istanbul, Turkey.

Ulusal Bildiriler

M. Yazıcı, F. Yıldız, A. F. Yetim, A. Çelik, 316L İmplant Malzemesinin AŞınma ve Manyetik Özellikleri Üzerine Plazma Nitrürleme Sıcaklığının Etkisi, VII. Ulusal Biyomekanik Kongresi, Isparta, 2014.

F. Yıldız, A. F. Yetim, A. Alsaran, A. Çelik, Plazma Nitrürlenmiş 316L Paslanmaz Çeliğinin Vücut Ortamına Yakın Şartlarda Aşınma Davranışı, IV. Ulusal Biyomekanik Kongresi, Erzurum, 2008.

Ö. Bayrak, A. F. Yetim, A. Alsaran, A. Çelik, Plazma Ortamında Nitrürlenen CoCrMo İmplant Alaşımının Ringer Çözeltisi İçerisindeki Korozyon Davranışı, IV. Ulusal Biyomekanik Kongresi, Erzurum, 2008.

İ. Efeoğlu, F. Yetim, A. Alsaran, A. Çelik, İ. Kaymaz, TiB2:BN:MoS2 Kompozit Yapıdaki Kendinden Yağlayıcı İnce Film Büyütülmesi, 2. Ulusal Bor Çalıştayı, Ankara, 2008

A. F. Yetim, F. Yıldız, A. Alsaran, A. Çelik, Plazma nitrürasyon işleminin ortopedik implant olarak kullanılan 316L ve Ti-6Al-4V alaşımının aşınma özelliklerine etkisi, II. Ulusal Tıbbi Cihazlar İmalatı Sanayi Kongre ve Sergisi, Samsun, 2007.

Ö. Bayrak, A. Çelik, A. F. Yetim, A. Alsaran, Kalça protezi malzemesi olarak kullanılan dövme CoCrMo alaşımının plazma nitrürasyon davranışı, II. Ulusal Tıbbi Cihazlar İmalatı Sanayi Kongre ve Sergisi, Samsun, 2007.

A. Çelik, A. F. Yetim, A. Alsaran, M. Karakan, Manyetik alanın yorulma ömrüne etkisi, 10. Denizli Malzeme Sempozyumu ve Sergisi, 200-206, 2004.

M. Karakan, A Alsaran., A. F. Yetim, A. Çelik, AISI 4140 çeliğinin plazma ile nitrokarbürlenmesi üzerine bir çalışma, 10. Denizli Malzeme Sempozyumu ve Sergisi, 18-24, 2004.

M. Karakan, A. Alsaran, A. F. Yetim, A. Çelik, Plazma ile ferritik ve ostenitik nitrokarbürleme işlemlerinin karşılaştırılması, II. Makine Tasarım ve İmalat Teknolojileri Kongresi, 181-188, 2003.

Akpinar, S.,Gültekin,K. “Yapıştırıcıyla Birleştirilmiş Tek Tesirli Kompozit Bağlantılarda İstifleme Açısının Hasar Yüküne Etkisi”,KOMPEGE-2013Kuşadası,TÜRKİYE

Alsaran. A., F. Yıldız ve A. Çelik, “Nitrürlenmiş AISI 1020 çeliğinin plazma yaşlandırma sonrası yapısal ve mekanik özellikleri”, IV. Makine Tasarım ve İmalat Teknolojileri Kongresi, Konya, 2007.

Manay, E. Ozceyhan, V. Sahin, B. Eşkenar üçgen blokajların ısı transferi iyileştirmesi, 19. Isı Bilimi ve Tekniği Kongresi, 9-12 Eylül 2013 Samsun,Türkiye.

Manay, E. Sahin, B. Yay elemanlar yerleştirilmiş boruda nanoakışkanların ısı transferi performanslarının incelenmesi, 19. Isı Bilimi ve Tekniği Kongresi, 9-12 Eylül 2013 Samsun,Türkiye.

Sahin, B. Bazarbashi, M. Manay, E. Subaşı, A. S tipi kanatların ısı transferi performanslarının yanıt yüzey yöntemi ile tahmin edilmesi, 19. Isı Bilimi ve Tekniği Kongresi, 9-12 Eylül 2013 Samsun,Türkiye.

Ömeroğlu, G. Karagöz, Ş, Çomaklı, Ö. Manay, E.  İki fazlı Akışta Farklı İç Elemanların Basınç Düşümü ve Yoğunluk Değişim Tipi Osilasyonlara Etkileri, 11. Ulusal tesisat mühendisliği kongresi ve teskon-sodex fuarı, 17-20 Nisan 2013, İzmir, Türkiye.

Sahin, B. Manay, E. İçerisinde delinmiş kare iğne kanatçıklar bulunan kare kanalda iki optimizasyon tekniğinin karşılaştırılması, 10. Ulusal tesisat mühendisliği kongresi ve teskon-sodex fuarı, 13-16 Nisan 2013, İzmir, Türkiye.

Manay, E. Sahin, B. Karagöz, Ş. Delikli kare kanatçıklardan taşınımla ısı transferinin sayısal olarak incelenmesi, 10. Ulusal tesisat mühendisliği kongresi ve teskon-sodex fuarı, 13-16 Nisan 2013, İzmir, Türkiye.

Manay, M  Sahin, the b.ccompariso of the thermal performance of Al 2 O 3 -water and CuO-water nanofluids, Nanorecognition 8, June 25-29, 2012, Ankara, Turkey.

Manay, M  Sahin, B. Second law analysis of Al 2 O 3 -water nanofluid in the tube with twisted tape inserts, Nanorecognition 8, June 25-29, 2012, Ankara, Turkey