PHASE CHANGE MATERIALS (PCMS) FOR BUILDINGS AND AUTOMOTIVE APPLICATIONS: A REVIEW STUDY , Tabatabaei Malazi Mahdi,AFŞAR FARAZ,KAYA KENAN, Yayın Yeri:Heat Transfer Research ,2025, , 2025

EXPLORING CABIN HEATING EFFICIENCY IN ELECTRIC VEHICLES: AN EXPERIMENTAL ANALYSIS OF AIR HEATING MECHANISMS AND STRATEGIC INSULATION , AFŞAR FARAZ,MANDEV EMRE,CEVİZ MEHMET AKİF,ÇELİK ALİ,MURATÇOBANOĞLU BURAK, Yayın Yeri:Heat Transfer Research ,2025, , 2025

Exploring Cabin Heating Efficiency in Electric Vehicles Through Experimental Analysis , AFŞAR FARAZ,MANDEV EMRE,CEVİZ MEHMET AKİF,Ali Çelik,MURATÇOBANOĞLU BURAK, Yayın Yeri:Heat Transfer Research ,2025, , 2025

Advanced mini solar still design: Spiral heating, triangular prism condensation, and comprehensive energy-exergy analysis , AFŞAR FARAZ,Köse Murat,AKYÜREK EDA FEYZA,MANDEV EMRE, Yayın Yeri:Energy for Sustainable Development ,2025, , 2025

Thermal performance investigation of microencapsulated phase change material enhanced with graphene nanoplatelets in double-glazing applications , ÇELİK ALİ,AFŞAR FARAZ,MURATÇOBANOĞLU BURAK,MANAY EYÜPHAN,MANDEV EMRE,CEVİZ MEHMET AKİF,KARA YUSUF ALİ, Yayın Yeri:Thermal Science and Engineering Progress ,2024, , 2024

Thermal performance investigation of microencapsulated phase change material enhanced with graphene nanoplatelets in double-glazing applications , çelik ali,CEVİZ MEHMET AKİF,KARA YUSUF ALİ,MANDEV EMRE,MURATÇOBANOĞLU BURAK,AFSHARI FARAZ,MANAY EYÜPHAN, Yayın Yeri:Energy and Buildings ,2024, , 2024

The influence of combination of surface roughness and nanostructure of adhesive on the strength of adhesively bonded joints , AKPINAR SALİH,KARS ABDULSAMET,BAYRAMOĞLU SİMAY,DEMİRAL MURAT, Yayın Yeri:International Journal of Adhesion and Adhesives ,2024, , 2024

The effects of using intermittent metal part reinforcement and countersink on the strength of adhesively bonded joints , ÇALIK AHMET,AKPINAR SALİH,DEMİRAL MURAT, Yayın Yeri:International Journal of Adhesion and Adhesives ,2024, , 2024

The effect of geometry on joint strength in adhesively bonded joints with the same adhesive area , AKPINAR SALİH, HACISALİHOĞLU İLYAS, ÇALIK AHMET, Yayın Yeri:Mechanics of Advanced Materials and Structures ,2024, , 2024

The effect of doping different amounts of boron on the corrosion resistance and biocompatibility of TiO2 nanotubes synthesized on SLM Ti6Al4V samples , ACAR MUHAMMET TAHA,ÇOMAKLI ONUR,YAZICI MUSTAFA,ARSLAN MEHMET EMİN,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Surfaces and Interfaces ,2024, , 2024

Superamphiphobic TiO2 Film by Sol–Gel Dip Coating Method on Commercial Pure Titanium , ASLAN ÇAKIR MEVRA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Journal of Materials Engineering and Performance ,2024, , 2024

Su Bazlı Nanoakışkanların Hazırlanmasında Kullanılan Yeni Yüzey Modifiye Fe3O4 Nanopartiküllerinin Uzun Vadeli Kararlılıklarının İncelenmesi , MURATÇOBANOĞLU BURAK, MANDEV EMRE, ŞAHİN BAYRAM, MANAY EYÜPHAN, Rahimpour Shabnam, Teimuri-Mofrad Reza, AFŞAR FARAZ, Yayın Yeri:Politeknik Dergisi ,2024, , 2024

Selective laser melting of Ti6Al4V alloy: Effects of graphene-TiO2 nanotubes composites corrosion and biocompatibility , ACAR MUHAMMET TAHA,ÇOMAKLI ONUR,ARSLAN MEHMET ENES, Yayın Yeri:Journal of Alloys and Compounds ,2024, , 2024

Pulsed-dc bias magnetron sputtered TiB2 ceramic coating , BÜLBÜL FERHAT, EFEOĞLU İHSAN, Yayın Yeri:International Journal of Refractory Metals and Hard Materials ,2024, , 2024

Predictive modelling of laser powder bed fusion of Fe-based nanocrystalline alloys based on experimental data using multiple linear regression analysis , ÖZDEN MERVE GİZEM, Yayın Yeri:Heliyon ,2024, , 2024

Multifunctional electroless nickel boron composite coatings incorporated by magnesium diboride ceramic particles , BÜLBÜL FERHAT,KARA ADEM, Yayın Yeri:International Journal of Ceramic Engineering and Science ,2024, , 2024

Investigation of cabin heating in electric vehicles with integrating solar cells and heat storage systems , ÇELİK ALİ, Yayın Yeri:Journal of Energy Storage ,2024, , 2024

Improving solar still efficiency through integration of cellulose-based water absorbers and Peltier condensation unit , MANDEV EMRE,MURATÇOBANOĞLU BURAK,ÇELİK ALİ,CEVİZ MEHMET AKİF,Di Nicola Giovanni,AFŞAR FARAZ, Yayın Yeri:Thermal Science and Engineering Progress ,2024, , 2024

Improving solar still efficiency through integration of cellulose-based water absorbers and Peltier condensation unit , MANDEV EMRE,MURATÇOBANOĞLU BURAK,çelik ali,CEVİZ MEHMET AKİF,Di Nicola Giovanni,AFSHARI FARAZ, Yayın Yeri:Thermal Science and Engineering Progress ,2024, , 2024

Experimental study on the influence of inclination angle on phase change materials and natural convection during melting , YOLADI MEHMET, AKYÜREK EDA FEYZA, AFŞAR FARAZ, Yayın Yeri:Journal of Energy Storage ,2024, , 2024

Experimental investigation on using building shower drain water as a heat source for heat pump systems , KHANLARI ATAOLLAH, SÖZEN ADNAN, ŞAHİN BAYRAM, DI NICOLA Giovanni, AFŞAR FARAZ, Yayın Yeri:Energy Sources, Part A: Recovery, Utilization and Environmental Effects ,2024, , 2024

EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS OF FERROFLUIDS IN THE PRESENCE OF MAGNETIC FIELD AND LAMINAR FLOW CONDITIONS , MURATÇOBANOĞLU BURAK,MANDEV EMRE,ÖMEROĞLU GÖKHAN,MANAY EYÜPHAN, Yayın Yeri:Heat Transfer Research ,2024, , 2024

Experimental comparative analysis of solar system productivity and performance in water distillation: Solar stills vs. parabolic dish systems , AFŞAR FARAZ, Yayın Yeri:Desalination ,2024, , 2024

EXPERIMENTAL AND NUMERICAL STUDY ON SOLAR ENERGY STORAGE IN BLACK-COVERED SUNSPACE USING WATER-FILLED TIN CANS , AFŞAR FARAZ,MANDEV EMRE,MURATÇOBANOĞLU BURAK,ÇELİK ALİ,CEVİZ MEHMET AKİF, Yayın Yeri:Journal of Enhanced Heat Transfer ,2024, , 2024

EXPERIMENTAL AND NUMERICAL STUDY ON SOLAR ENERGY STORAGE IN BLACK-COVERED SUNSPACE USING WATER-FILLED TIN CANS , AFSHARI FARAZ,MANDEV EMRE,MURATÇOBANOĞLU BURAK,çelik ali,CEVİZ MEHMET AKİF, Yayın Yeri:Journal of Enhanced Heat Transfer ,2024, , 2024

EXPERIMENTAL AND NUMERICAL STUDY ON EFFECTS OF NEW-GENERATION FINNED HEAT EXCHANGER ON THERMAL PERFORMANCE OF THERMOELECTRIC COOLING SYSTEMS , MURATÇOBANOĞLU BURAK,MANDEV EMRE,ÖMEROĞLU GÖKHAN,AKPINAR FATİH,ÖZ ERKAN,AFSHARI FARAZ, Yayın Yeri:Heat Transfer Research ,2024, , 2024

Enhancing high cycle fatigue performance of plasma nitrided AISI 4140 steel by post-aging treatment and direct current magnetic field , YETİM ALİ FATİH,KOVACI HALİM,TEKDİR HİLMİ,SEÇER KAVASOĞLU YEŞİM,BOZKURT YUSUF BURAK,ÇELİK AYHAN, Yayın Yeri:Materials Today Communications ,2024, , 2024

Desalination performance evaluation of a solar still enhanced by thermoelectric modules , MANDEV EMRE,MURATÇOBANOĞLU BURAK,MANAY EYÜPHAN,ŞAHİN BAYRAM, Yayın Yeri:Solar Energy ,2024, , 2024

CFD simulation and experimental analysis of cooling performance for thermoelectric cooler with liquid cooling heat sink , MURATÇOBANOĞLU BURAK,MANDEV EMRE,CEVİZ MEHMET AKİF,MANAY EYÜPHAN,AFSHARI FARAZ, Yayın Yeri:Journal of Thermal Analysis and Calorimetry ,2024, , 2024

Centrifugally spun hydroxyapatite/carbon composite nanofiber scaffolds for bone tissue engineering , AKGÜL YASİN,Stojanovska Elena,ÇALIŞIR MEHMET DURMUŞ,POLAT YUSUF,KILIÇ ALİ, Yayın Yeri:Functional Composites and Structures ,2024, , 2024

BN-TiO2 multilayer coating on AZ91 for enhanced corrosion performance in marine environments , MELETLİOĞLU Emrah,ÇOMAKLI ONUR, Yayın Yeri:Matéria (Rio de Janeiro) ,2024, , 2024

A study on properties of electroless Ni-B/MgB2 coatings on AZ91 magnesium alloy , BÜLBÜL FERHAT,KILCI TUĞÇENUR, Yayın Yeri:Heliyon ,2024, , 2024

A comprehensive review of solar cooking systems , CEVİZ MEHMET AKİF,MURATÇOBANOĞLU BURAK,MANDEV EMRE,AFSHARI FARAZ, Yayın Yeri:WIREs Energy and Environment ,2024, , 2024

A comprehensive review of solar cooking systems , CEVİZ MEHMET AKİF,MURATÇOBANOĞLU BURAK,MANDEV EMRE,AFSHARI FARAZ, Yayın Yeri:Wiley Interdisciplinary Reviews: Energy and Environment ,2024, , 2024

Utilization of recyclable aluminum cans as fins in a vertical solar air heating system: An experimental and numerical study , KHANLARI ATAOLLAH, TUNCER AZİM DOĞUŞ, AFŞAR FARAZ, SÖZEN GÜLÇE, Yayın Yeri:Journal of Building Engineering ,2023, , 2023

Tribological performance of ceramic-based films under different tribo-test media and vacuum conditions , MANDEV Yeşim Zeynep, YETİM ALİ FATİH, Yayın Yeri:Central Library of the Slovak Academy of Sciences ,2023, , 2023

Tribological behavior of plasma-sprayed Yttria-stabilized zirconia thermal barrier coatings on 316L stainless steel under high-temperature conditions , YETİM ALİ FATİH, TEKDİR HİLMİ, TURALIOĞLU KEREM, Taftalı Merve, YETİM TUBA, Yayın Yeri:Elsevier BV ,2023, , 2023

Thermal analysis of Fe3O4/water nanofluid in spiral and serpentine mini channels by using experimental and theoretical models , AFŞAR FARAZ, MURATÇOBANOĞLU BURAK, Yayın Yeri:International Journal of Environmental Science and Technology ,2023, , 2023

THE EFFECTS OF CIRCULAR INSERTS ON THE THERMAL AND FLOW CHARACTERISTICS IN A HORIZONTAL PIPE EXCHANGER: A NUMERICAL INVESTIGATION , YEŞİLYURT MUHAMMET KAAN, ADIGÜZEL NESRİN, YILDIRIM ORHAN, ÇOMAKLI ÖMER, AFŞAR FARAZ, Yayın Yeri:Kütahya Dumlupinar Üniversitesi ,2023, , 2023

The effect of fiber length and structure on joint strength in bonded joints with fiber-reinforced composite adhesive , ÇALIK AHMET, AKPINAR SALİH, Yayın Yeri:International Journal of Adhesion & Adhesives ,2023, , 2023

The effect of co-creation of notches and recesses in the adhered material on the strength of single-lap adhesive joints: Experimental and numerical analysis , BAYRAMOĞLU SİMAY, AKPINAR SALİH, Yayın Yeri:International Journal of Adhesion & Adhesives ,2023, , 2023

Synthesis and characterisation of single and duplex ZnO/TiO2 ceramic films on additively manufactured bimetallic material of 316L stainless steel and Ti6Al4V , YETİM TUBA, TEKDİR HİLMİ, Taftalı Merve, TURALIOĞLU KEREM, YETİM ALİ FATİH, Yayın Yeri:IOP Publishing ,2023, , 2023

Study on a novel inclined solar water distillation system using thermoelectric module for condensation , AFŞAR FARAZ,MANDEV EMRE,ÇELİK ALİ, Yayın Yeri:Process Safety and Environmental Protection ,2023, , 2023

Soğuk iklim bölgelerinde LEED sertifikalı eğitim binasının pandemi bağlamında değerlendirilmesi , ÇELİK ALİ, Yayın Yeri:Gümüşhane Üniversitesi Fen Bilimleri Dergisi ,2023, , 2023

Soft-Magnetic Behavior of Fe-Based Nanocrystalline Alloys Produced Using Laser Powder Bed Fusion , ÖZDEN MERVE GİZEM, Yayın Yeri:ADVANCED ENGINEERING MATERIALS ,2023, , 2023

Service Life Modelling of Single Lap Joint Subjected to Cyclic Bending Load , DEMİRAL MURAT, Abbassi Fethi, Muhammad Riaz, AKPINAR SALİH, Yayın Yeri:MDPI Aerospace ,2023, , 2023

PERFORMANCE ANALYSIS OF THERMO-ELECTRIC COOLING SYSTEMS EQUIPPED WITH SURFACE-MODIFIED AND RECYCLED NANOFLUIDS , MANDEV EMRE, MURATÇOBANOĞLU BURAK, MANAY EYÜPHAN, ŞAHİN BAYRAM, Teimuri-Mofrad Reza, Rahimpour Shabnam, AFŞAR FARAZ, Yayın Yeri:JOURNAL OF ENHANCED HEAT TRANSFER ,2023, , 2023

Optimizing laser additive manufacturing process for Fe-based nano-crystalline magnetic materials , ÖZDEN MERVE GİZEM, Yayın Yeri:Journal of Alloys and Compounds ,2023, , 2023

Investigation of mechanical, tribological and magnetic properties after plasma nitriding of AISI 316L stainless steel produced with different orientations angles by selective laser melting , YAZICI MUSTAFA, ÇOMAKLI ONUR, YETİM TUBA, YETİM ALİ FATİH, ÇELİK AYHAN, Yayın Yeri:Elsevier BV ,2023, , 2023

Influence of carbon and glass fiber reinforced composite adhesive on the strength of adhesively bonded joints , AKPINAR SALİH, AVİNÇ AKPINAR İCLAL, Yayın Yeri:Materials Testing ,2023, , 2023

Experimental Study to Evaluate Effect of Source Temperature on COP and Compressor Status in Water-to-Air Heat Pumps , CEVİZ MEHMET AKİF, AFŞAR FARAZ, CEYLAN MURAT, MURATÇOBANOĞLU BURAK, MANDEV EMRE, Gelen Gökhan, Yayın Yeri:Heat Transfer Research ,2023, , 2023

Experimental and numerical study on air-to-nanofluid thermoelectric cooling system using novel surface-modified Fe3O4 nanoparticles , AFŞAR FARAZ, MANDEV EMRE, Rahimpour Shabnam, MURATÇOBANOĞLU BURAK, ŞAHİN BAYRAM, MANAY EYÜPHAN, Teimuri-Mofrad Reza, Yayın Yeri:Microfluidics and Nanofluidics ,2023, , 2023

Experimental and numerical study on a novel fanless air-to-air solar thermoelectric refrigerator equipped with boosted heat exchanger , AFSHARI FARAZ, MANDEV EMRE, MURATÇOBANOĞLU BURAK, YETİM ALİ FATİH, CEVİZ MEHMET AKİF, Yayın Yeri:Elsevier BV ,2023, , 2023

Experimental and numerical investigation of flow and thermal characteristics of aluminum block exchanger using surface-modified and recycled nanofluids , Gülmüş Berrak, MURATÇOBANOĞLU BURAK, MANDEV EMRE, AFŞAR FARAZ, Yayın Yeri:International Journal of Numerical Methods for Heat & Fluid Flow ,2023, , 2023

Experimental and numerical analysis of a grooved hybrid photovoltaic-thermal solar drying system , TUNCER AZİM DOĞUŞ, KHANLARI ATAOLLAH, AFŞAR FARAZ, SÖZEN ADNAN, ÇİFTÇİ ERDEM, KUSUN Barış, Şahinkesen İstemihan, Yayın Yeri:Applied Thermal Engineering ,2023, , 2023

Experimental analysis of energy storage performance of phase change materials in horizontal double-glazing applications , CEVİZ MEHMET AKİF,MANDEV EMRE,MURATÇOBANOĞLU BURAK,ÇELİK ALİ,AFŞAR FARAZ, Yayın Yeri:JOURNAL OF ENERGY STORAGE ,2023, , 2023

Exergy analysis and optimization of multiple injection parameters of a diesel engine with Taguchi method , GÜNER ERDOĞAN, KALTAKKIRAN GALİP, BAKIRCI KADİR, CEVİZ MEHMET AKİF, Yayın Yeri:Informa UK Limited ,2023, , 2023

Enhancing Soft-Magnetic Properties of Fe-Based Nanocrystalline Materials with a Novel Double-Scanning Technique , ÖZDEN MERVE GİZEM, Yayın Yeri:ADVANCED ENGINEERING MATERIALS ,2023, , 2023

Effects of process parameters on selective laser melting of Ti6Al4V-ELI alloy and parameter optimization via response surface method , KAYA GÜRKAN, YILDIZ FATİH, KORKMAZ İSMAİL HAKKI, KAYMAZ İRFAN, YETİM ALİ FATİH, Ergüder Tevfik Oğuzhan, Şen Çağdaş, Yayın Yeri:Elsevier BV ,2023, , 2023

EFFECTS OF NANOPARTICLE SIZE ON PROPERTIES OF NANOFLUID AND HEAT TRANSFER ENHANCEMENT IN SPIRAL EXCHANGER USING TURBULATORS , MURATÇOBANOĞLU BURAK, AFŞAR FARAZ, Yayın Yeri:Nanoscience and Technology: An International Journal ,2023, , 2023

Effects of double glazing, black wall, black carpeted floor and insulation on thermal performance of solar-glazed balconies , AFSHARI FARAZ, MURATÇOBANOĞLU BURAK, MANDEV EMRE, CEVİZ MEHMET AKİF, mirzaee ziba, Yayın Yeri:Elsevier BV ,2023, , 2023

Effect of solution-blown nanofibrous web on quasi-static punch shear test results and quasi-static indentation behavior of carbon fiber-reinforced epoxy matrix composites , AYTEN ALİ İMRAN, POLAT YUSUF, SEYHAN AYBENİZ, ŞAHBAZ MEHMET, Yayın Yeri:SAGE Publications ,2023, , 2023

Effect of bilayer numbers on structural, mechanical, tribological and corrosion properties of TiO2–SiO2 multilayer film-coated β-type Ti45Nb alloys , ÇOMAKLI ONUR, YAZICI MUSTAFA, Demir Merve, YETİM ALİ FATİH, ÇELİK AYHAN, Yayın Yeri:Elsevier BV ,2023, , 2023

Development of optimal diesel injection strategy based on the prediction of performance and emissions using deep neural network , GÜNER ERDOĞAN, KALELİ ALİRIZA, BAKIRCI KADİR, CEVİZ MEHMET AKİF, Yayın Yeri:INTERNATIONAL JOURNAL OF ENGINE RESEARCH ,2023, , 2023

Critical Assessment of the Bonded Single Lap Joint Exposed to Cyclic Tensile Loading , DEMİRAL MURAT, Abbassi Fethi, Zahedi Abolfazl, AKPINAR SALİH, Yayın Yeri:Aerospace ,2023, , 2023

Computational fluid dynamics simulation and experimental investigation of a thermoelectric system for predicting influence of applied voltage and cooling water on cooling performance , CEVİZ MEHMET AKİF, AFŞAR FARAZ, MURATÇOBANOĞLU BURAK, CEYLAN MURAT, MANAY EYÜPHAN, Yayın Yeri:International Journal of Numerical Methods for Heat and Fluid Flow ,2023, , 2023

CFD analysis and experimental investigation to determine the flow characteristics around NACA 4412 airfoil blades at different wind speeds and blade angles , AFŞAR FARAZ, KHANLARI ATAOLLAH, SÖZEN ADNAN, TUNCER AZİM DOĞUŞ, ATEŞ İBRAHİM, ŞAHİN BAYRAM, Yayın Yeri:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering ,2023, , 2023

AN EXPERIMENTAL INVESTIGATION TO PREDICT OPTIMUM CHARGE OF A HEAT PUMP SYSTEM , AFŞAR FARAZ, KHANLARI ATAOLLAH, TUNCER AZİM DOĞUŞ, SÖZEN ADNAN, Yayın Yeri:Heat Transfer Research ,2023, , 2023

A Study Using the Hybrid Fuzzy AHP&TOPSIS Method in the Conversion of a LEED-Certified Education Building into a Nearly Zero-Energy Building in a Cold Climate , ÇELİK ALİ,ŞAHİN BAYRAM,MANAY EYÜPHAN,BALIN ABİT, Yayın Yeri:Strojniški vestnik-Journal of Mechanical Engineering ,2023, , 2023

A novel ignition timing strategy to regulate the energy balance during the warm up phase of an SI engine , KÖKSAL HÜSEYİN, CEVİZ MEHMET AKİF, YAKUT KENAN, KALTAKKIRAN GALİP, ÖZAKIN AHMET NUMAN, Yayın Yeri:Elsevier BV ,2023, , 2023

A comprehensive study on the fatigue properties of duplex surface treated Ti6Al4V by plasma nitriding and DLC coating , YETİM ALİ FATİH, KOVACI HALİM, UZUN YAKUP, TEKDİR HİLMİ, ÇELİK AYHAN, Yayın Yeri:Elsevier BV ,2023, , 2023

Tribocorrosion properties and mechanism of a shot peened AISI 4140 low-alloy steel , BOZKURT YUSUF BURAK, KOVACI HALİM, YETİM ALİ FATİH, ÇELİK AYHAN, Yayın Yeri:Surface and Coatings Technology ,2022, , 2022

The effect of stepped notches and recesses on joint strength in adhesive bonded joints: Experimental and numerical analysis , HACISALİHOĞLU İLYAS, AKPINAR SALİH, Yayın Yeri:Theoretical and Applied Fracture Mechanics ,2022, , 2022

Synthesis and characterization of wear and corrosion resistant Ni-doped Al2O3 nanocomposite ceramic coatings by sol-gel method , YETİM TUBA, TURALIOĞLU KEREM, Taftalı Merve, TEKDİR HİLMİ, KOVACI HALİM, YETİM ALİ FATİH, Yayın Yeri:Surface and Coatings Technology ,2022, , 2022

SURFACE MODIFICATION OF Fe3O4 NANOPARTICLES FOR PREPARING STABLE WATER-BASED NANOFLUIDS , MANDEV EMRE, MANAY EYÜPHAN, Rahimpour Shabnam, Mohammadzadeh Ali, ŞAHİN BAYRAM, AFŞAR FARAZ, Teimuri-Mofrad Reza, Yayın Yeri:Heat Transfer Research ,2022, , 2022

Performance analysis of air-to-water binary thermoelectric Peltier cooling systems and determination of optimum arrangement , AFSHARI FARAZ, CEVİZ MEHMET AKİF, MANAY EYÜPHAN, CEYLAN MURAT, MURATÇOBANOĞLU BURAK, Yayın Yeri:Journal of the Brazilian Society of Mechanical Sciences and Engineering ,2022, , 2022

Numerical and experimental investigation of a solar absorber extension tube with turbulators for upgrading the performance of a solar dryer , KHANLARI ATAOLLAH, AFŞAR FARAZ, SÖZEN ADNAN, TUNCER AZİM DOĞUŞ, KUSUN Barış, Yayın Yeri:International Journal of Numerical Methods for Heat and Fluid Flow ,2022, , 2022

Numerical and experimental analysis of parallel-pass forced convection solar air heating wall with different plenum and absorber configurations , KHANLARI ATAOLLAH, SÖZEN ADNAN, AFŞAR FARAZ, TUNCER AZİM DOĞUŞ, AĞBULUT ÜMİT, AYTAÇ YILMAZ ZEYNEP, Yayın Yeri:International Journal of Numerical Methods for Heat and Fluid Flow ,2022, , 2022

Instantaneous energy balance and performance analysis during warm up period of a spark ignition engine under several thermal energy management strategies , KALTAKKIRAN GALİP, CEVİZ MEHMET AKİF, BAKIRCI KADİR, Yayın Yeri:Elsevier BV ,2022, , 2022

Improvement of polyethylene fiber wettability and mechanical properties through an environmentally sustainable spinning process , SEYHAN AYBENİZ, GUNAYDIN BEYZA NUR, POLAT YUSUF, KILIÇ ALİ, DEMİR ALİ, AVCI HÜSEYİN, Yayın Yeri:International Journal of Adhesion and Adhesives ,2022, , 2022

Effects of secondary fluid flow rate on cooling performance of vapor compression systems , AFSHARI FARAZ, ÇİLOĞLU DOĞAN, CEVİZ MEHMET AKİF, CEYLAN MURAT, Yayın Yeri:Gumushane University Journal of Science and Technology Institute ,2022, , 2022

Effect of heat exchanger base thickness and cooling fan on cooling performance of Air-To-Air thermoelectric refrigerator; experimental and numerical study , AFSHARI FARAZ, CEVİZ MEHMET AKİF, MANDEV EMRE, YILDIZ FATİH, Yayın Yeri:Elsevier BV ,2022, , 2022

Dört Nokta Eğme Yüküne Maruz Yapıştırma Bağlantılarında İç Kademenin Bağlantı Hasar Yüküne Etkisi: Deneysel ve Sayısal Analiz , ÇALIK AHMET, AKPINAR SALİH, Yayın Yeri:Osmaniye Korkut Ata Universitesi ,2022, , 2022

Developing an in-Line method to improve mechanical and flame retardancy performance of polyethylene fiber , Günaydın Beyza Nur, SEYHAN AYBENİZ, POLAT YUSUF, KILIÇ ALİ, DEMİR ALİ, ÜREYEN MUSTAFA ERDEM, AVCI HÜSEYİN, Yayın Yeri:SAGE Publications ,2022, , 2022

Combined Free and Forced Convection of Nanofluids in Minichannels with Different Diameters , AKYÜREK EDA FEYZA, CEYLAN MURAT, ŞAHİN BAYRAM, MANAY EYÜPHAN, Yayın Yeri:Heat Transfer Research ,2022, , 2022

A study on the effects of nanostructure reinforcement on the failure load in adhesively bonded joints after the subjected to fully reversed fatigue load , AKPINAR SALİH, DEMİR KÜBRA, GAVGALI ESMA, YETİM ALİ FATİH, Yayın Yeri:The Journal of Adhesion ,2022, , 2022

A REVIEW STUDY ON FACTORS AFFECTING THE STABILITY OF NANOFLUIDS , AFSHARI FARAZ, MANAY EYÜPHAN, Rahimpour Shabnam, ŞAHİN BAYRAM, MURATÇOBANOĞLU BURAK, Teimuri-Mofrad Reza T, Yayın Yeri:HEAT TRANSFER RESEARCH ,2022, , 2022

A comprehensive survey on utilization of hybrid nanofluid in plate heat exchanger with various number of plates , AFŞAR FARAZ, TUNCER AZİM DOĞUŞ, SÖZEN ADNAN, VARİYENLİ HALİL İBRAHİM, KHANLARI ATAOLLAH, GÜRBÜZ EMİNE YAĞIZ, Yayın Yeri:INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW ,2022, , 2022

The tribological and corrosion properties of anodized Ti6Al4V/316L bimetallic structures manufactured by additive manufacturing , TURALIOĞLU Kerem, TAFTALI Merve, TEKDİR HİLMİ, ÇOMAKLI ONUR, YAZICI MUSTAFA, YETİM TUBA, YETİM ALİ FATİH, Yayın Yeri:Surface and Coatings Technology ,2021, , 2021

The performance improvement of direct injection engines in cold start conditions integrating with phase change material: Energy and exergy analysis , KALTAKKIRAN GALİP, CEVİZ MEHMET AKİF, Yayın Yeri:JOURNAL OF ENERGY STORAGE ,2021, , 2021

The fracture load analysis of different material thickness in adhesively bonded joints subjected to fully reversed bending fatigue load , AKPINAR SALİH, Şahin Resul, Yayın Yeri:Theoretical and Applied Fracture Mechanics ,2021, , 2021

The effects of nanostructure additive on fracture strength in adhesively bonded joints subjected to fully reversed four-point bending fatigue load , DEMİR KÜBRA, GAVGALI ESMA, YETİM ALİ FATİH, AKPINAR SALİH, Yayın Yeri:International Journal of Adhesion and Adhesives ,2021, , 2021

The effects of adherend thickness on the fatigue strength of adhesively bonded single-lap joints , Şahin Resul, AKPINAR SALİH, Yayın Yeri:International Journal of Adhesion and Adhesives ,2021, , 2021

The effect of play-wear on surface roughness of steel music strings , BÜLBÜL FERHAT, SÖNMEZ ERDAL, EZİRMİK KADRİ VEFA, Yayın Yeri:Journal of Nature, Science & Technology (JANSET) ,2021, , 2021

Solution blown nanofibrous air filters modified with glass microparticles , POLAT YUSUF,ÇALIŞIR MEHMET DURMUŞ,GÜNGÖR MELİKE,SAĞIRLI MERVE NUR,ATAKAN RAZİYE,AKGÜL YASİN,DEMİR ALİ,KILIÇ ALİ, Yayın Yeri:Journal of Industrial Textiles ,2021, , 2021

NUMERICAL STUDY ON DRAG COEFFICIENT AND EVALUATION OF THE FLOW PATTERNS IN PERFORATED PARTICLES , AFŞAR FARAZ, ŞAHİN BAYRAM, MARCHETTI BARBARA, POLONARA Fabio, CORVARO Francesco, MARİELLA Mariella, Yayın Yeri:Heat Transfer Research ,2021, , 2021

NUMERICAL AND EXPERIMENTAL ANALYSIS OF LONGITUDINAL TUBULAR SOLAR AIR HEATERS MADE FROM PLASTIC AND METAL WASTE MATERIALS , KHANLARI ATAOLLAH, SÖZEN ADNAN, TUNCER AZİM DOĞUŞ, AFŞAR FARAZ, GÜRBÜZ EMİNE YAĞIZ, BİLGE Yaşarcan, Yayın Yeri:Heat Transfer Research ,2021, , 2021

Numerical analysis of elasto-plastic adhesively single step lap joints with cohesive zone models and its experimental verification , BAYRAMOGLU SİMAY,AKPINAR SALİH,ÇALIK AHMET, Yayın Yeri:Journal of Mechanical Science and Technology ,2021, , 2021

MECHANICAL PERFORMANCE OF CARBON - ARAMID FIBER-REINFORCED LAMINATED COMPOSITES UNDER IMPACT AND SHEAR LOADING , Atmaca Beyza Nur, Oruç Ramazan, Aşcı Görkem, Yiğit Kadir, Yüzer Serkan, POLAT YUSUF, EKİCİ BÜLENT, Yayın Yeri:Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering ,2021, , 2021

Mechanical and dynamic mechanical thermal properties of ensete fiber/woven glass fiber fabric hybrid composites , Negowa Tolera,POLAT YUSUF,AKGÜL YASİN,KILIÇ ALİ,Jawaid Mohammad, Yayın Yeri:Composite Structures ,2021, , 2021

Laser Additive Manufacturing of Fe-Based Magnetic Amorphous Alloys , ÖZDEN MERVE GİZEM, Yayın Yeri:Magnetochemistry ,2021, , 2021

Influences of Ti, Al and V metal doping on the structural, mechanical and tribological properties of DLC films , YETİM ALİ FATİH, KOVACI HALİM, KASAPOĞLU AHMET EMRE, BOZKURT YUSUF BURAK, ÇELİK AYHAN, Yayın Yeri:Diamond and Related Materials ,2021, , 2021

Improvements in the static/dynamic strength of porcelain fused to metal dental crowns with surface protrusions produced by selective laser melting , Taftalı Merve, TURALIOĞLU KEREM, YETİM ALİ FATİH, UZUN YAKUP, AKPINAR SALİH, YILDIZ FATİH, Yayın Yeri:Journal of Manufacturing Processes ,2021, , 2021

Improved structural, mechanical, corrosion and tribocorrosion properties of Ti45Nb alloys by TiN, TiAlN monolayers, and TiAlN/TiN multilayer ceramic films , ÇOMAKLI ONUR, Yayın Yeri:CERAMICS INTERNATIONAL ,2021, , 2021

Heat transfer enhancement of finned shell and tube heat exchanger using Fe2O3/water nanofluid , AFŞAR FARAZ, SÖZEN ADNAN, KHANLARI ATAOLLAH, TUNCER AZİM DOĞUŞ, Yayın Yeri:Journal of Central South University ,2021, , 2021

Farkli golgeleme durumlarinin fotovoltaik panel karakteristigi uzerine etkisi , AKYÜREK EDA FEYZA, GELİŞ KADİR, YOLADI MEHMET, Yayın Yeri:Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi ,2021, , 2021

Experimental investigation of effect of refrigerant gases, compressor lubricant and operating conditions on performance of a heat pump , AFŞAR FARAZ, SÖZEN ADNAN, KHANLARI ATAOLLAH, TUNCER AZİM DOĞUŞ, Hafiz Muhammad Ali, Yayın Yeri:Journal of Central South University ,2021, , 2021

Experimental and numerical analysis of a compact indirect solar dehumidification system , AFŞAR FARAZ, TUNCER AZİM DOĞUŞ, SÖZEN ADNAN, ÇİFTÇİ ERDEM, KHANLARI ATAOLLAH, Yayın Yeri:Solar Energy ,2021, , 2021

Energy-exergy and sustainability analysis of a PV-driven quadruple-flow solar drying system , KHANLARI ATAOLLAH, SÖZEN ADNAN, AFŞAR FARAZ, TUNCER AZİM DOĞUŞ, Yayın Yeri:Renewable Energy ,2021, , 2021

Effect of solution blown nanofibers on Mode-I fracture toughness and dynamic mechanical properties of carbon fiber-reinforced composites , POLAT YUSUF, EKİCİ BÜLENT, KILIÇ ALİ, Yayın Yeri:Polymer Composites ,2021, , 2021

Effect of compatibilizer and fiber loading on ensete fiber-reinforced HDPE green composites: Physical, mechanical, and morphological properties , Negowa Tolera, POLAT YUSUF, KILIÇ ALİ, Yayın Yeri:Composites Science and Technology ,2021, , 2021

Dört Noktalı Eğme Testi Altında Yapıştırıcı ile Birleştirilmiş Bindirme Bağlantısının Deneysel ve Sonlu Elemanlar Analizi , AKPINAR SALİH, ÇALIK AHMET, Yayın Yeri:Çukurova Üniversitesi Mühendislik Fakültesi Dergisi ,2021, , 2021

Determining the tribological behavior of 316L stainless steel with lubricating micro-channels produced by the selective laser melting (SLM) method , TURALIOĞLU KEREM, Taftalı Merve, YETİM ALİ FATİH, Yayın Yeri:Industrial Lubrication and Tribology ,2021, , 2021

Dehumidification of sewage sludge using quonset solar tunnel dryer: An experimental and numerical approach , AFŞAR FARAZ, KHANLARI ATAOLLAH, TUNCER AZİM DOĞUŞ, SÖZEN ADNAN, Şahinkesen İstemihan, DI NICOLA Giovanni, Yayın Yeri:Renewable Energy ,2021, , 2021

Corrosion Properties of Ceramic-Based TiO2 Films on Plasma Oxidized Ti6Al4V/316L Layered Implant Structured Manufactured by Selective Laser Melting , TEKDİR HİLMİ, YETİM TUBA, YETİM ALİ FATİH, Yayın Yeri:Journal of Bionic Engineering ,2021, , 2021

Corrosion and tribocorrosion properties of duplex surface treatments consisting of plasma nitriding and DLC coating , KOVACI HALİM, BOZKURT YUSUF BURAK, YETİM ALİ FATİH, BARAN ACIMERT ÖZLEM, ÇELİK AYHAN, Yayın Yeri:Tribology International ,2021, , 2021

An investigation of the fatigue performance of adhesively bonded step-lap joints: An experimental and numerical analysis , GAVGALI ESMA,Şahin Resul,AKPINAR SALİH, Yayın Yeri:International Journal of Adhesion and Adhesives ,2021, , 2021

An experimental investigation on melting and solidification behavior of phase change material in cylindrical latent heat storage units with minichannel , YOLADI MEHMET, AKYÜREK EDA FEYZA, Yayın Yeri:JOURNAL OF ENERGY STORAGE ,2021, , 2021

Additive manufacturing of multiple layered materials (Ti6Al4V/316L) and improving their tribological properties with glow discharge surface modification , TEKDİR HİLMİ, YETİM ALİ FATİH, Yayın Yeri:VACUUM ,2021, , 2021

The fracture load analysis of different support patches in adhesively bonded single-lap joints , DEMİR KÜBRA,BAYRAMOĞLU SİMAY,AKPINAR SALİH, Yayın Yeri:THEORETICAL AND APPLIED FRACTURE MECHANICS ,2020, , 2020

The experimental and numerical analysis of the adhesively bonded three-step-lap joints with different step lengths , DURMUŞ MELEK,AKPINAR SALİH, Yayın Yeri:THEORETICAL AND APPLIED FRACTURE MECHANICS ,2020, , 2020

The effects of thermal cycle and nanostructure reinforcement on the shear load in adhesively bonded joints , KAZAZ İLKER,AKPINAR SALİH,ÖZEL ADNAN, Yayın Yeri:MECHANICS OF ADVANCED MATERIALS AND STRUCTURES ,2020, , 2020

The effects of boriding on metal-ceramic bond strength of Co–Cr alloy fabricated by selective laser melting , UZUN YAKUP, YANIKOĞLU NURAN, KOVACI HALİM, YETİM ALİ FATİH, ÇELİK AYHAN, Yayın Yeri:Journal of Adhesion Science and Technology ,2020, , 2020

The effects of boriding on metal-ceramic bond strength of Co\u2013Cr alloy fabricated by selective laser melting , UZUN YAKUP, YANIKOĞLU NURAN, KOVACI HALİM, YETİM ALİ FATİH, ÇELİK AYHAN, Yayın Yeri:Journal of Adhesion Science and Technology ,2020, , 2020

The effect of wear mechanısm for plasma oxidized Cp-Ti and its alloys on tribocorrosion performance , SEÇER YEŞİM,BOZKURT YUSUF BURAK,KOVACI HALİM,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Selçuk-Teknik Dergisi ,2020, , 2020

Testing of a novel convex-type solar absorber drying chamber in dehumidification process of municipal sewage sludge , TUNCER AZİM DOĞUŞ, SÖZEN ADNAN, AFŞAR FARAZ, KHANLARI ATAOLLAH, CEYLİN Şirin, GÜNGÖR AFŞİN, Yayın Yeri:Journal of Cleaner Production ,2020, , 2020

Structure and performance of electroblown PVDF-based nanofibrous electret filters , Al Rai Adel,Stojanovska Elena,Fidan Gizem,Yetgin Eda,POLAT YUSUF,KILIÇ ALİ,DEMİR ALİ,YILMAZ ŞAFAK, Yayın Yeri:POLYMER ENGINEERING AND SCIENCE ,2020, , 2020

Solution blow spinning (SBS) and SBS-spun nanofibers: Materials, methods, and applications , Dadol Glebert C,KILIÇ ALİ,Tijing Leonard D,Lim Kramer Joseph A,Cabatingan Luis K,Tan Noel Peter B,Stojanovska Elena,POLAT YUSUF, Yayın Yeri:Materials Today Communications ,2020, , 2020

Self-assembled fibrillar polyethylene crystals with tunable properties , SEYHAN AYBENİZ,Gunaydin Beyza Nur,POLAT YUSUF,KILIÇ ALİ,DEMİR ALİ,AVCI HÜSEYİN, Yayın Yeri:POLYMER ENGINEERING AND SCIENCE ,2020, , 2020

Panel Konumu ve Acisinin Fotovoltaik Panel Karakteristigi Uzerine Etkisi , GELİŞ KADİR,AKYÜREK EDA FEYZA,YOLADI MEHMET, Yayın Yeri:Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi ,2020, , 2020

Investigation of internal step and metal part reinforcement on joint strength in the adhesively bonded joint: Experimental and numerical analysis , BAYRAMOĞLU SİMAY,DEMİR KÜBRA,AKPINAR SALİH, Yayın Yeri:THEORETICAL AND APPLIED FRACTURE MECHANICS ,2020, , 2020

Influence of CrN, TiAlN monolayers and TiAlN/CrN multilayer ceramic films on structural, mechanical and tribological behavior of β-type Ti45Nb alloys , ÇOMAKLI ONUR, Yayın Yeri:CERAMICS INTERNATIONAL ,2020, , 2020

Improving structural, tribological and electrochemical properties of Ti6Al4V alloy with B-doped TiO2 thin films , ÇELİK AYHAN,ACAR MUHAMMET TAHA,YETİM TUBA,KOVACI HALİM,YETİM ALİ FATİH, Yayın Yeri:TRIBOLOGY INTERNATIONAL ,2020, , 2020

Farkli Tip Isi Degistiriciler Icin Termodinamik Analiz , AKYÜREK EDA FEYZA,GELİŞ KADİR,YOLADI MEHMET, Yayın Yeri:Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi ,2020, , 2020

Experimental Study for Comparing Heating and Cooling Performance of Thermoelectric Peltier , AFŞAR FARAZ, Yayın Yeri:Politeknik Dergisi ,2020, , 2020

EXPERIMENTAL OPTIMIZATION AND INVESTIGATION OF COMPRESSOR COOLING FAN IN AN AIR-TO-WATER HEAT PUMP , AFŞAR FARAZ, ŞAHİN BAYRAM, KHANLARI ATAOLLAH, MANAY EYÜPHAN, Yayın Yeri:Heat Transfer Research ,2020, , 2020

EXPERIMENTAL AND NUMERICAL STUDY ON HEAT TRANSFER ENHANCEMENT OF HOME RADIATORS BY EMPLOYING SOLAR CELLS AND FANS , AFŞAR FARAZ, Yayın Yeri:Heat Transfer Research ,2020, , 2020

Experimental and numerical investigation on thermoelectric coolers for comparing air-to-water to air-to-air refrigerators , AFŞAR FARAZ, Yayın Yeri:Journal of Thermal Analysis and Calorimetry ,2020, , 2020

Experimental and CFD survey of indirect solar dryer modified with low-cost iron mesh , GÜLER DAL HANDE ÖZGE, SÖZEN ADNAN, TUNCER AZİM DOĞUŞ, AFŞAR FARAZ, KHANLARI ATAOLLAH, CEYLİN Şirin, GÜNGÖR AFŞİN, Yayın Yeri:Solar Energy ,2020, , 2020

Experimental Analysis and Evaluation of Thermostat Effects on Engine Cooling System , Ghasemi Hadi, KALELİ ALİRIZA, SOLMAZ İSMAİL, AFŞAR FARAZ, Yayın Yeri:Journal of Thermal Science ,2020, , 2020

Empirical Investigation of Small-Scale Aluminium Wool Packed Solar Air Heater Made with Waste Material , SÖZEN ADNAN, KHANLARI ATAOLLAH, TUNCER AZİM DOĞUŞ, CEYLİN Şirin, AFŞAR FARAZ, GÜNGÖR AFŞİN, Yayın Yeri:Politeknik Dergisi ,2020, , 2020

Electrically conductive concrete: A laboratory-based investigation and numerical analysis approach , DEHGHANPOUR Heydar, YILMAZ KEMALETTİN, AFŞAR FARAZ, İPEK METİN, Yayın Yeri:Construction and Building Materials ,2020, , 2020

Effect of turbulator modifications on the thermal performance of cost-effective alternative solar air heater , AFŞAR FARAZ, SÖZEN ADNAN, KHANLARI ATAOLLAH, TUNCER AZİM DOĞUŞ, CEYLİN Şirin, Yayın Yeri:Renewable Energy ,2020, , 2020

Effect of Oxidation Time on Wear Behaviour of Thermally Oxidized CoCrMo Alloy , ÇOMAKLI ONUR, Yayın Yeri:Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi ,2020, , 2020

Effect of air pressure on nanofiber production in solution blowing method , POLAT YUSUF,YANGAZ MURAT UMUT,Calisir Mehmet Durmus,Gul Mehmet Zafer,DEMİR ALİ,Ekici Bulent,KILIÇ ALİ, Yayın Yeri:JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY ,2020, , 2020

Drying municipal sewage sludge with v-groove triple-pass and quadruple-pass solar air heaters along with testing of a solar absorber drying chamber , KHANLARI ATAOLLAH, SÖZEN ADNAN, AFŞAR FARAZ, CEYLİN Şirin, TUNCER AZİM DOĞUŞ, GÜNGÖR AFŞİN, Yayın Yeri:Science of the Total Environment ,2020, , 2020

Dizel ve Biyodizel Yakıtlı Bir Motorda Yakıt Sıcaklığının Motor Performansı ve Egzoz Emisyonlarına Etkisinin İncelenmesi , GÜNER ERDOĞAN,CEVİZ MEHMET AKİF, Yayın Yeri:Bayburt Üniversitesi Fen Bilimleri Dergisi ,2020, , 2020

Tribological and electrochemical behavior of Ag2O/ZnO/NiO nanocomposite coating on commercial pure titanium for biomedical applications , ÇOMAKLI ONUR,YAZICI MUSTAFA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Industrial Lubrication and Tribology ,2019, , 2019

The effect of surface plastic deformation produced by shot peening on corrosion behavior of a low-alloy steel , KOVACI HALİM,BOZKURT YUSUF BURAK,YETİM ALİ FATİH,ASLAN MEVRA,ÇELİK AYHAN, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2019, , 2019

The Effect of Adherend Thickness and Width on Fracture Behavior in Adhesively bonded Double Cantilever Beam Joints , AKPINAR SALİH, Yayın Yeri:European Mechanical Science ,2019, , 2019

Solution blown polymer/biowaste derived carbon particles nanofibers: An optimization study and energy storage applications , Stojanovska Elena,Öztürk Nur Dilara,POLAT YUSUF,AKBULUT HATEM,KILIÇ ALİ, Yayın Yeri:Journal of Energy Storage ,2019, , 2019

Optimization of waste gate in the diesel engines with turbocharger , BİLEN KADİR,CEVİZ MEHMET AKİF, Yayın Yeri:International Journal of Automotive Engineering ,2019, , 2019

Optimization of Turbocharged Diesel Engines , BİLEN KADİR,CEVİZ MEHMET AKİF, Yayın Yeri:International Journal of Mechanical and Mechatronics Engineering ,2019, , 2019

Mechanical, morphological, structural and dynamic mechanical properties of alkali treated Ensete stem fibers reinforced unsaturated polyester composites , Negowa Tolera,POLAT YUSUF,Büyüknalçacı Feyza,KILIÇ ALİ,Saba Naheed,Mohammed Jawaid, Yayın Yeri:Composite Structures ,2019, , 2019

Investigating environmental effects of different combi boilers using LPG , VARİYENLİ HALİL İBRAHİM, AFŞAR FARAZ, KHANLARI ATAOLLAH, Yayın Yeri:El-Cezeri: Journal of Science and Engineering ,2019, , 2019

Experimental and numerical determination of the thermal cycle performance of joints obtained with nanostructure-doped nanocomposite adhesives , AKPINAR SALİH,ÖZEL ADNAN, Yayın Yeri:Composites Part B: Engineering ,2019, , 2019

Effects of shot peening pre-treatment and plasma nitriding parameters on the structural, mechanical and tribological properties of AISI 4140 low-alloy steel , KOVACI HALİM,HACISALİHOĞLU İLYAS,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2019, , 2019

Effect of nanostructured reinforcement of adhesive on thermal cycling performance of a single-lap joint with composite adherends , AKPINAR SALİH,Avinc Akpinar Iclal, Yayın Yeri:Composites Part B: Engineering ,2019, , 2019

Effect of gas mixture on tribological performance of plasma nitrided grey cast iron under dry and lubricated conditions , ÇOMAKLI ONUR,YETİM ALİ FATİH,Karaca Bahadır,ÇELİK AYHAN, Yayın Yeri:Materials Research Express ,2019, , 2019

Effect of Extensometer Usage on Obtaining the Force-Displacement Curve of the Adhesively Single Lap Joint , ÇALIK AHMET,AKPINAR SALİH, Yayın Yeri:European Mechanical Science ,2019, , 2019

Centrifugally spun silica (SiO2) nanofibers for high-temperature air filtration , Tepekıran Beyza Nur,ÇALIŞIR MEHMET DURMUŞ,POLAT YUSUF,AKGÜL YASİN,KILIÇ ALİ, Yayın Yeri:AEROSOL SCIENCE AND TECHNOLOGY ,2019, , 2019

Biomechanical analysis of spinal implants with different rod diameters under static and fatigue loads: an experimental study , KOVACI HALİM,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Biomedical Engineering-Biomedizinische Technik ,2019, , 2019

Tribological behavior of DLC films and duplex ceramic coatings under different sliding conditions , KOVACI HALİM,YETİM ALİ FATİH,BARAN ÖZLEM,ÇELİK AYHAN, Yayın Yeri:Ceramics International ,2018, , 2018

Tribological and electrochemical properties of TiO2 films produced on Cp-Ti by sol-gel and SILAR in bio-simulated environment , ÇOMAKLI ONUR,YAZICI MUSTAFA,KOVACI HALİM,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2018, , 2018

Thermodynamic analysis of a system converted from heat pump to refrigeration device , AFŞAR FARAZ, KARAGÖZ ŞENDOĞAN, ÇOMAKLI ÖMER, Ghasemi Hadi, Yayın Yeri:Heat and Mass Transfer ,2018, , 2018

The synthesis of super-hydrophilic and hard MgB2 coatings as an alternative to electroless nickel coatings , BÜLBÜL FERHAT,GÜNEY MERVE, Yayın Yeri:KOVOVE MATERIALY-METALLIC MATERIALS ,2018, , 2018

The friction and wear performance of DLC coatings deposited on plasma nitrided AISI 4140 steel by magnetron sputtering under air and vacuum conditions , KOVACI HALİM,BARAN ÖZLEM,YETİM ALİ FATİH,BOZKURT YUSUF BURAK,KARA LEVENT,ÇELİK AYHAN, Yayın Yeri:Surface and Coatings Technology ,2018, , 2018

The fracture behaviour of nanostructure added adhesives under ambient temperature and thermal cyclic conditions , KANAR BELİN,AKPINAR SALİH,Avinc Akpinar Iclal,AKBULUT HAMİT,ÖZEL ADNAN, Yayın Yeri:Theoretical and Applied Fracture Mechanics ,2018, , 2018

The Effect of Plasma Oxidation and Nitridation on Corrosion Behavior of CoCrMo Alloy in SBF Solution , ASLAN MEVRA, ÇOMAKLI ONUR, YAZICI MUSTAFA, YETİM ALİ FATİH, BAYRAK ÖZGÜ, ÇELİK AYHAN, Yayın Yeri:Surface Review and Letters ,2018, , 2018

Structural, mechanical and tribological properties of Ti and TiN coatings on 316L stainless steel , YAZICI MUSTAFA,KOVACI HALİM,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Ceramics International ,2018, , 2018

On numerical methods; optimization of CFD solution to evaluate fluid flow around a sample object at low Re numbers , AFŞAR FARAZ, Ghasemi Hadi, ŞAHİN BAYRAM, Grifoni Roberta Cocci, CORVARO Francesco, MARCHETTI BARBARA, POLONARA Fabio, Yayın Yeri:Mathematics and Computers in Simulation ,2018, , 2018

Numerical analysis of ball-type turbulators in tube heat exchangers with computational fluid dynamic simulations , AFŞAR FARAZ, Ghasemi Hadi, DI NICOLA Giovanni, Yayın Yeri:International Journal of Environmental Science and Technology ,2018, , 2018

Investigation of the usage possibility of CuO and CuS thin films produced by successive ionic layer adsorption and reaction (SILAR) as solid lubricant , KOVACI HALİM,AKALTUN YUNUS,YETİM ALİ FATİH,UZUN YAKUP,ÇELİK AYHAN, Yayın Yeri:Surface and Coatings Technology ,2018, , 2018

Investigation of mechanical and thermal properties of nanostructure-doped bulk nanocomposite adhesives , Avinc Akpinar Iclal,GÜRSES AHMET,AKPINAR SALİH,GÜLTEKİN KÜRŞAT,AKBULUT HAMİT,ÖZEL ADNAN, Yayın Yeri:The Journal of Adhesion ,2018, , 2018

Effect of Ti amount on wear and corrosion properties of Ti-doped Al 2 O 3 nanocomposite ceramic coated CP titanium implant material , ÇOMAKLI ONUR,YAZICI MUSTAFA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Ceramics International ,2018, , 2018

Effect of Nitrogen Amount on Tribological Behavior of Plasma Nitrided 31CrMoV9 Steel , ÇOMAKLI ONUR,YETİM ALİ FATİH,Karaca Bahadır,ÇELİK AYHAN, Yayın Yeri:SURFACE REVIEW AND LETTERS ,2018, , 2018

Effect of boronizing on the structural, mechanical and tribological properties of CoCrW dental alloy produced by selective laser melting , UZUN YAKUP,KOVACI HALİM,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Industrial Lubrication and Tribology ,2018, , 2018

Comparative engine characteristics of biodiesels from hazelnut, corn, soybean, canola and sunflower oils on DI diesel engine , EFE ŞÜKRAN, CEVİZ MEHMET AKİF, TEMÜR HAKAN, Yayın Yeri:Renewable Energy ,2018, , 2018

An experimental study on composite adhesives reinforced with different types of organo-clays , AVİNC AKPİNAR İCLAL,GÜLTEKİN KÜRŞAT,AKPINAR SALİH,GÜRSES AHMET,ÖZEL ADNAN, Yayın Yeri:The Journal of Adhesion ,2018, , 2018

A thermodynamic comparison between heat pump and refrigeration device using several refrigerants , AFŞAR FARAZ, ÇOMAKLI ÖMER, KARAGÖZ ŞENDOĞAN, Ghasemi Hadi, Yayın Yeri:Energy and Buildings ,2018, , 2018

Tribological properties of TiO2 SiO2 double layer coatings deposited on CP Ti , ÇOMAKLI ONUR,YAZICI MUSTAFA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Surface Review and Letters ,2017, , 2017

TRIBOLOGICAL PROPERTIES OF TiO/SiO DOUBLE LAYER COATINGS DEPOSITED ON CP-Ti , ÇOMAKLI ONUR,YAZICI MUSTAFA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Surface Review and Letters ,2017, , 2017

The Effects of Nanofilter and Nanoclay on Reducing Pollutant Emissions from Rapeseed Biodiesel in a Diesel Engine , AFSHARİ FARZAD, AFSHARİ Hamed, AFŞAR FARAZ, Ghasemi Hadi, Yayın Yeri:Waste and Biomass Valorization ,2017, , 2017

The Effects of Aging Time on the Structural and ElectrochemicalProperties of Composite Coatings on CP-Ti Substrate , ÇOMAKLI ONUR,YAZICI MUSTAFA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Journal of Bionic Engineering ,2017, , 2017

The Effects of Aging Time on the Structural and Electrochemical Properties of Composite Coatings on CP-Ti Substrate , ÇOMAKLI ONUR,YAZICI MUSTAFA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Journal of Bionic Engineering ,2017, , 2017

Research on strength of nanocomposite adhesively bonded composite joints , Avinc Akpinar Iclal,GÜLTEKİN KÜRŞAT,AKPINAR SALİH,AKBULUT HAMİT,ÖZEL ADNAN, Yayın Yeri:Composites Part B: Engineering ,2017, , 2017

Production of hard hydrophilic Ni-B coatings on hydrophobic Ni-Ti and Ti-6Al-4V alloys by electroless deposition , BÜLBÜL FERHAT,KARABUDAK FİLİZ,YEŞİLDAL RUHİ, Yayın Yeri:Materials Testing ,2017, , 2017

Optimization of heat transfer and efficiency of engine via air bubble injection inside engine cooling system , Ghasemi Hadi, KALELİ ALİRIZA, AFŞAR FARAZ, AMINI ALI, Yayın Yeri:Applied Thermal Engineering ,2017, , 2017

Influence of Refrigerant Properties and Charge Amount on Performance of Reciprocating Compressor in Air Source Heat Pump , AFŞAR FARAZ, ÇOMAKLI ÖMER, ADIGÜZEL NESRİN, Ghasemi Hadi, Yayın Yeri:Journal of Energy Engineering ,2017, , 2017

Influence of plasma nitriding treatment on the adhesion of DLC films deposited on AISI 4140 steel by PVD magnetron sputtering , KOVACI HALİM,BARAN ÖZLEM,BAYRAK ÖZGÜ,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Journal of Adhesion Science and Technology ,2017, , 2017

Experimental and numerical investigation of the cylindrical blade tube inserts effect on the heat transfer enhancement in the horizontal pipe exchangers , KARAGÖZ ŞENDOĞAN, AFŞAR FARAZ, YILDIRIM ORHAN, ÇOMAKLI ÖMER, Yayın Yeri:Heat and Mass Transfer ,2017, , 2017

Experimental analysis on the single-lap joints bonded by a nanocomposite adhesives which obtained by adding nanostructures , AVİNÇ AKPINAR İCLAL,GÜLTEKİN KÜRŞAT,AKPINAR SALİH,AKBULUT HAMİT,ÖZEL ADNAN, Yayın Yeri:Composites Part B: Engineering ,2017, , 2017

Dry Sliding Wear Characteristics of Plasma-Nitrocarburized Co – Cr – Mo Alloy , BAYRAK ÖZGÜ,KOVACI HALİM,YILDIZ FATİH,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Metal Science and Heat Treatment ,2017, , 2017

Characterization of lubricating oil effects on the performance of reciprocating compressors in air–water heat pumps , AFŞAR FARAZ, ÇOMAKLI ÖMER, LESANİ ASGHAR, KARAGÖZ ŞENDOĞAN, Yayın Yeri:International Journal of Refrigeration ,2017, , 2017

An Investigation of Effect of Fuel Temperature on Engine Performanceand NO Emissions in a Spark Ignition Engine Running on LPG , ÖNER İLHAN VOLKAN,CEVİZ MEHMET AKİF,KALELİ ALİRIZA, Yayın Yeri:International Journal of Innovative Research and Reviews ,2017, , 2017

A NOVEL METHOD FOR IMPROVING PLASMA NITRIDING EFFICIENCY: PRE-MAGNETIZATION BY DC MAGNETIC FIELD , KOVACI HALİM,YETİM ALİ FATİH,BOZKURT YUSUF BURAK,ÇELİK AYHAN, Yayın Yeri:Surface Review and Letters ,2017, , 2017

A novel method for improving plasma nitriding efficiency Pre magnetization by DC magnetic field , KOVACI HALİM,bozkurt yusuf burak,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Surface Review and Letters ,2017, , 2017

Ultrasonic coating of nanofibrous webs a feasible approach to photocatalytic water filters , ŞİMŞEK RAMAZAN,POLAT YUSUF,PAMPAL ESRA ŞERİFE,Ağma Onur,KILIÇ ALİ, Yayın Yeri:Journal of Coatings Technology and Research ,2016, , 2016

The preparation of hard and super hydrophilic MgB2 coating by spray pyrolysis deposition , BÜLBÜL FERHAT,JAFARPOUR SOMAIYEH,ERTUĞRUL MEHMET, Yayın Yeri:Materialwissenschaft und Werkstofftechnik ,2016, , 2016

The effects of graphene nanostructure reinforcement on the adhesive method and the graphene reinforcement ratio on the failure load in adhesively bonded joints , GÜLTEKİN KÜRŞAT,AKPINAR SALİH,GÜRSES AHMET,EROĞLU ZAFER,ÇAM SALİM,AKBULUT HAMİT,KESKİN ZEKİ,ÖZEL ADNAN, Yayın Yeri:Composites Part B: Engineering ,2016, , 2016

The effect of calcination temperatures on structural and electrochemical properties of TiO2 film deposited on commercial pure titanium , ÇOMAKLI ONUR,YAZICI MUSTAFA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Surface and Coatings Technology ,2016, , 2016

Synergistic effect of bias and target currents for magnetron sputtered MoS2 Ti composite films , BÜLBÜL FERHAT,EFEOĞLU İHSAN, Yayın Yeri:Material Testing ,2016, , 2016

Solution blowing of thermoplastic polyurethane nanofibers A facile method to produce flexible porous materials , POLAT YUSUF,PAMPAL ESRA ŞERİFE,Elena Stojanovska,ŞİMŞEK RAMAZAN,Ahmed Hassanin,KILIÇ ALİ,DEMİR ALİ,YILMAZ ŞAFAK, Yayın Yeri:Journal of Applied Polymer Science ,2016, , 2016

Optimal Charge Amount for Different Refrigerants in Air-to-Water Heat Pumps , AFŞAR FARAZ, ÇOMAKLI ÖMER, ADIGÜZEL NESRİN, KARAGÖZ ŞENDOĞAN, Yayın Yeri:Journal of Science and Technology - Transactions of Mechanical Engineering ,2016, , 2016

Investigation of structural and tribological properties of electroless Ni B coated pure titanium , ÇELİK İLHAN,KARAKAN MEHMET,BÜLBÜL FERHAT, Yayın Yeri:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology ,2016, , 2016

Fatigue crack growth behavior of DLC coated AISI 4140 steel under constant and variable amplitude loading conditions , KOVACI HALİM,YETİM ALİ FATİH,BARAN ÖZLEM,ÇELİK AYHAN, Yayın Yeri:Surface and Coatings Technology ,2016, , 2016

Fatigue crack growth analysis of plasma nitrided AISI 4140 low alloy steel Part 2 Variable amplitude loading and load interactions , KOVACI HALİM,YETİM ALİ FATİH,BARAN ÖZLEM,ÇELİK AYHAN, Yayın Yeri:MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING ,2016, , 2016

Fatigue crack growth analysis of plasma nitrided AISI 4140 low alloy steel Part 1 constant amplitude loading , KOVACI HALİM,YETİM ALİ FATİH,BARAN ÖZLEM,ÇELİK AYHAN, Yayın Yeri:MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING ,2016, , 2016

Fabrication of antibacterial and hydrophilic electroless Ni B coating on 316L stainless steel , BÜLBÜL FERHAT,bülbül leman elif, Yayın Yeri:Applied Physics A ,2016, , 2016

EFFECTS OF USING PHASE CHANGE MATERIALS ON THE COLD START EXHAUST EMİSSİONS CHARACTERİSTİCS OF DIESEL ENGINES , KAYA FERHAT,CEVİZ MEHMET AKİF,KALELİ ALİRIZA,GÜLLÜCE HÜSEYİN,ÖZAKIN AHMET NUMAN, Yayın Yeri:Mugla Journal of Science and Technology ,2016, , 2016

Effects of unbalance on the adhesively bonded composites-aluminium joints , GÜLTEKİN KÜRŞAT,AKPINAR SALİH,ÖZEL ADNAN,ÖNER GÜLŞAH, Yayın Yeri:The Journal of Adhesion ,2016, , 2016

Effect of sol aging time on the wear properties of TiO2 SiO2 composite films prepared by a sol gel method , YAZICI MUSTAFA,ÇOMAKLI ONUR,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Tribology International ,2016, , 2016

Analysis of windbreaker combinations on steam power plant natural draft dry cooling towers , CEVİZ MEHMET AKİF, Yayın Yeri:APPLIED THERMAL ENGINEERING ,2016, , 2016

ALÜMİNYUM OKSİT VE TİTANYUM DİOKSİT PARTİKÜL TAKVİYELİ YAPIŞTIRICILARLA BİRLEŞTİRİLMİŞ BAĞLANTILARIN MEKANİK ÖZELLİKLERİNİN DENEYSEL OLARAK BELİRLENMESİ , AKPINAR SALİH, Yayın Yeri:Niğde Üniversitesi Mühendislik Bilimleri Dergisi ,2016, , 2016

A review on non electro nanofibre spinning techniques , Stojanovska Elena,CANBAY EMİNE,PAMPAL ESRA ŞERİFE,ÇALIŞIR MEHMET DURMUŞ,Ağma Onur,POLAT YUSUF,ŞİMŞEK RAMAZAN,Gündoğdu Serhat,AKGÜL YASİN,KILIÇ ALİ, Yayın Yeri:RSC Adv. ,2016, , 2016

Vakum Pompaları , BÜLBÜL FERHAT,SOMAIYEH JAFARPOUR, Yayın Yeri:Ordu Üniversitesi Bilim ve Teknoloji Dergisi ,2015, , 2015

Using of artificial neural network for the prediction of tribological properties of plasma nitrided 316L stainless steel , YETİM ALİ FATİH,ÇODUR MUHAMMED YASİN,YAZICI MUSTAFA, Yayın Yeri:Materials Letters ,2015, , 2015

The effect of post aging on wear properties of a plasma nitrided ferromagnetic steel under DC magnetic field , YETİM ALİ FATİH,KOVACI HALİM,YILDIZ FATİH,BAYRAK ÖZGÜ,ÇELİK AYHAN, Yayın Yeri:WEAR ,2015, , 2015

The effect of plasma nitriding temperature on the electrochemical and semiconducting properties of thin passive films formed on 316L stainless steel implant material in SBF solution , YAZICI MUSTAFA,ÇOMAKLI ONUR,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Surface and Coatings Technology ,2015, , 2015

The Effect of Moment and Flexural Rigidity of Adherend on the Strength of Adhesively Bonded Single Lap Joints , GÜLTEKİN KÜRŞAT,AKPINAR SALİH,ÖZEL ADNAN, Yayın Yeri:The Journal of Adhesion ,2015, , 2015

Preparation and characterization of electroless Ni B nano SiO2 Al2O3 TiO2and CuO composite coatings , EKMEKCİ DURSUN,BÜLBÜL FERHAT, Yayın Yeri:Bulletin of Materials Science ,2015, , 2015

Ni B Coating Production on Magnesium Alloy by Electroless Deposition , BÜLBÜL FERHAT, Yayın Yeri:International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering ,2015, , 2015

Microscopic examination of play worn steel music strings , BÜLBÜL FERHAT, Yayın Yeri:Friction And Wear Research ,2015, , 2015

KAYMA YÜKÜNE MARUZ YAPIŞTIRMA BAĞLANTILARINDANYAPISAL YAPIŞTIRICILARIN MEKANİK ÖZELLİKLERİNİNBELİRLENMESİ , AYDIN MURAT DEMİR,AKPINAR SALİH,ÖZEL ADNAN,ERDOĞAN SADIK, Yayın Yeri:Mühendis ve Makina ,2015, , 2015

Investigation of Play Wear Damage on Steel Music Strings Using Atomic Force Microscope and Low Level Resistance Method , BÜLBÜL FERHAT,KARACALI TEVHİT, Yayın Yeri:Savart Journal - Science And Technology Of Stringed Musical Instruments ,2015, , 2015

Controlling spark timing for consecutive cycles to reduce the cyclic variations of SI engines , KALELİ ALİRIZA,CEVİZ MEHMET AKİF,ERENTÜRK KÖKSAL, Yayın Yeri:Applied Thermal Engineering ,2015, , 2015

Controlling LPG temperature for SI engine applications , CEVİZ MEHMET AKİF,KALELİ ALİRIZA,GÜNER ERDOĞAN, Yayın Yeri:Applied Thermal Engineering ,2015, , 2015

Wear resistance and non magnetic layer formation on 316L implant material with plasma nitriding , YETİM ALİ FATİH,YAZICI MUSTAFA, Yayın Yeri:Journal of Bionic Engineering ,2014, , 2014

Wear Behavior of Plasma Oxidized CoCrMo Alloy under Dry and Simulated Body Fluid Conditions , ÇELİK AYHAN,ASLAN MEVRA,YETİM ALİ FATİH,BAYRAK ÖZGÜ, Yayın Yeri:Journal of Bionic Engineering ,2014, , 2014

The strength of the adhesively bonded step lap joints for different step numbers , AKPINAR SALİH, Yayın Yeri:Composites Part B: Engineering ,2014, , 2014

The effect of the adherend width on the strength of adhesively bonded single lap joint Experimental and numerical analysis , GÜLTEKİN KÜRŞAT,AKPINAR SALİH,ÖZEL ADNAN, Yayın Yeri:Composites Part B: Engineering ,2014, , 2014

Sert ve Yumuşak Kaplamalar , BÜLBÜL FERHAT, Yayın Yeri:Ordu Üniv. Bil. Tek. Derg ,2014, , 2014

Plazma Nitrokarbürleme , KARAKAN MEHMET,ALSARAN AKGÜN,ÇELİK AYHAN,YETİM ALİ FATİH, Yayın Yeri:MakinaTek ,2014, , 2014

Performance of plasma sprayed Al2O3 coating in bio simulated environment , YILDIZ FATİH,YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:Metal Science and Heat Treatment ,2014, , 2014

Effect of Heat Treatment on Structure Of Electroless Ni B Coated Pure Titanium , BÜLBÜL FERHAT,ÇELİK İLHAN, Yayın Yeri:Journal of the Faculty of Engineering and Architecture of Gazi University ,2014, , 2014

The Effect of Composite Patches on the Failure of Adhesively Bonded Joints Under Bending Moment , AKPINAR SALİH, Yayın Yeri:Applied Composite Materials ,2013, , 2013

Plain and fretting fatigue behavior of Ti6Al4V alloy coated with TialN thin film , YILDIZ FATİH,YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:Tribology International ,2013, , 2013

Evaluation of an electroless nickel boron Ni B coating on corrosion fatigue performance of ball burnished AISI 1045 steel , SADELER RECEP,çorak selçuk,ATASOY SELÇUK,BÜLBÜL FERHAT, Yayın Yeri:Kovove Materialy-Metallic Materials ,2013, , 2013

Effects of using vortex tubes on events during cold start of a direct injection diesel engine , çelik adem,CEVİZ MEHMET AKİF,YILMAZ MEHMET,ÖNER İLHAN VOLKAN,KARAGÖZ ŞENDOĞAN, Yayın Yeri:Journal of Renewable and Sustainable Energy ,2013, , 2013

Effects of laminate carbon epoxy composite patches on the strength of double strap adhesive joints Experimental and numerical analysis , AKPINAR SALİH, Yayın Yeri:Materials & Design ,2013, , 2013

Effects of Different Curvature Patches on the Strength of Double Strap Adhesive Joints , AKPINAR SALİH, Yayın Yeri:The Journal of Adhesion ,2013, , 2013

Effect of Magnetic Field on the Wear Properties of a Ferromagnetic Steel , YETİM ALİ FATİH,KOVACI HALİM,ASLAN MEVRA,ÇELİK AYHAN, Yayın Yeri:WEAR ,2013, , 2013

YAPIŞTIRICIYLA BİRLEŞTİRİLMİŞ T BAĞLANTI TİPİNİN İKİ VE ÜÇ BOYUTLU GERİLME ANALİZİ , AKPINAR SALİH,AYDIN MURAT DEMİR, Yayın Yeri:EÜFBED - Fen Bilimleri Enstitüsü Dergisi ,2012, , 2012

Tribological and corrosion behaviour of electroless Ni B coating possessing a blackberry like structure , BÜLBÜL FERHAT,ALTUN HİKMET,KÜÇÜK ÖZKAN,EZİRMİK KADRİ VEFA, Yayın Yeri:Metals and Materials International ,2012, , 2012

Stress Relief Solutions for Brittle TiB2 Coatings , BÜLBÜL FERHAT,EFEOĞLU İHSAN, Yayın Yeri:Surface Review and Letters ,2012, , 2012

Investigation of structural tribological and corrosion properties of electroless Ni B coating deposited on 316L stainless steel , BÜLBÜL FERHAT,ALTUN HİKMET,EZİRMİK KADRİ VEFA,KÜÇÜK ÖZKAN, Yayın Yeri:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology ,2012, , 2012

Investigation of Effect of Deposition Time in Electroless Ni B Coatings , BÜLBÜL FERHAT,ALTUN HİKMET,KÜÇÜK ÖZKAN, Yayın Yeri:Journal of Qafqaz University ,2012, , 2012

Engine performance exhaust emissions and cyclic variations in a lean burn SI engine fueled by gasoline hydrogen blends , CEVİZ MEHMET AKİF,Sen Asok K,Alp Kerem Küler,ÖNER İLHAN VOLKAN, Yayın Yeri:Applied Thermal Engineering ,2012, , 2012

Effect of protrusion at the ends of bondline in single lap joints under tension and bending , AKPINAR SALİH,TEMİZ ŞEMSETTİN,AYDIN MURAT DEMİR,ÖZEL ADNAN, Yayın Yeri:Journal of Adhesion Science and Technology ,2012, , 2012

CoCrMo İmplant Alaşımının Plazma oksidasyon İşlemi İle Aşınma Direncinin İyileştirilmesi , YETİM ALİ FATİH,ASLAN MEVRA,HACISALİHOĞLU İLYAS,YILDIZ FATİH,BAYRAK ÖZGÜ, Yayın Yeri:Mühendis ve Makina ,2012, , 2012

The effects of deposition parameters on surface morphology and crystallographic orientation of electroless Ni B coatings , BÜLBÜL FERHAT, Yayın Yeri:Metals and Materials International ,2011, , 2011

Fretting fatigue properties of plasma nitrided AISI 316 L stainless steel Experiments and finite element analysis , YILDIZ FATİH,YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN,KAYMAZ İRFAN, Yayın Yeri:Tribology International ,2011, , 2011

Determination of cycle number for real in cylinder pressure cycle analysis in internal combustion engines , CEVİZ MEHMET AKİF,ÇAVUŞOĞLU BÜLENT,KAYA FERHAT,ÖNER İLHAN VOLKAN, Yayın Yeri:Energy ,2011, , 2011

Deposition and Adhesion Characterization of Ti BN MoS2 Based Composite Thin Films Prepared by Closed Field Unbalanced Magnetron Sputtering , YETİM ALİ FATİH,EFEOĞLU İHSAN,ÇELİK AYHAN,ALSARAN AKGÜN,KAYMAZ İRFAN, Yayın Yeri:ournal of Adhesion Science and Technology ,2011, , 2011

Corrosion behavior of Ti DLC deposition on pre nitrided 316L stainless steel and Ti6Al4V alloy , YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN,EFEOĞLU İHSAN, Yayın Yeri:Corrosion Engineering,Science and Technology ,2011, , 2011

Antibacterial activity of electroless Ni B coating , BÜLBÜL FERHAT, Yayın Yeri:Materials Science and Technology ,2011, , 2011

ANALYSIS OF THE THERMAL EFFICIENCY AND CYCLIC VARIATIONS IN A SI ENGINE UNDER LEAN COMBUSTION CONDITIONS , CEVİZ MEHMET AKİF, ÖNER İLHAN VOLKAN, KAYA FERHAT, KARACALI TEVHİT, Yayın Yeri:ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY ,2011, , 2011

Analysis of Combustion Stability and Its Relation to Performance Characteristics in a Compression Ignition Engine Fueled with Diesel-biodiesel Blends , CEVİZ MEHMET AKİF, Koncuk Fahri, KÜÇÜK ÖZKAN, GÖREN AHMET CEYHAN, YÜKSEL FİKRET, Yayın Yeri:ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS ,2011, , 2011

The effect of TiC transient layer on a DLC based functionally gradient coating prepared by closed field unbalanced magnetron sputtering plating system , BÜLBÜL FERHAT,EFEOĞLU İHSAN, Yayın Yeri:Metals and Materials International ,2010, , 2010

MoS2 Ti composite films having 002 orientation and low Ti content , BÜLBÜL FERHAT,EFEOĞLU İHSAN, Yayın Yeri:Crystallography Reports ,2010, , 2010

Investigation of wear behavior of titanium oxide films produced by anodic oxidation on commercially pure titanium in vacuum conditions , YETİM ALİ FATİH, Yayın Yeri:SURFACE & COATINGS TECHNOLOGY ,2010, , 2010

Investigation of Tribological and Electrochemical Properties of Dual Layer After Low Temperature Plasma Carbo nitriding , YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:Surface Engineering ,2010, , 2010

Improving tribological properties of Ti6Al4V alloy with duplex surface treatment , YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2010, , 2010

Fatigue life determination of plasma nitrided medical grade CoCrMo alloy , BAYRAK ÖZGÜ,YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:Fatigue & Fracture of Engineering Materials & Structures ,2010, , 2010

Design of a new SI engine intake manifold with variable length plenum , CEVİZ MEHMET AKİF,akın mustafa, Yayın Yeri:Energy Conversion and Management ,2010, , 2010

Characterization of Ti CN a C films prepared by pulsed dc bias sputtering , BÜLBÜL FERHAT,EFEOĞLU İHSAN, Yayın Yeri:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology ,2010, , 2010

Yüzey Özelliklerinin Araştırılmasında Kullanılan yöntemler , BÜLBÜL FERHAT, Yayın Yeri:Metal Dünyası ,2009, , 2009

Wear and Corrosion Behaviour of Various Surface Treated Medical Grade Titanium Alloy in Bio simulated Environment , YILDIZ FATİH,YETİM ALİ FATİH,ALSARAN AKGÜN,EFEOĞLU İHSAN, Yayın Yeri:WEAR ,2009, , 2009

Telli Çalgılarda Kullanılan Tellerde Aşınma Mekanizması , BÜLBÜL FERHAT, Yayın Yeri:Makine Teknolojileri Elektronik Dergisi ,2009, , 2009

Several Plasma Diffusion Processes for Improving Wear Properties of Ti6Al4V Alloy , YETİM ALİ FATİH,YILDIZ FATİH,VANGÖLÜ SEBAHATTİN YENAL,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:WEAR ,2009, , 2009

Plazma Kavramına Dair , BÜLBÜL FERHAT, Yayın Yeri:Kastamonu Eğitim Dergisi ,2009, , 2009

Plazma ile nitrürleme ve mangan fosfat kaplama işleminin AISI 5140 çeliğinin aşınma davranışı üzerine etkisi , TOTİK YAŞAR,ALSARAN AKGÜN,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Mühendis ve Makina ,2009, , 2009

Günümüz Teknik Resim Bilgisinin Temellerini Oluşturan Tarihi İlk Adımlar , BÜLBÜL FERHAT, Yayın Yeri:Makine İhtisas ,2009, , 2009

Characterization of size quantized PbTe thin films synthesized by an electrochemical co deposition method , ERDOĞAN İBRAHİM YASİN,ÖZNÜLÜER TUBA,BÜLBÜL FERHAT,DEMİR ÜMİT, Yayın Yeri:Thin Solid Films ,2009, , 2009

Tribological Characteristics of MoS2 Nb solid lubricant film in different tribo test conditions , EFEOĞLU İHSAN,BARAN ÖZLEM,YETİM ALİ FATİH,ALTINTAŞ SABRİ, Yayın Yeri:Surface and CoatingTechnology ,2008, , 2008

Surface modification of 316L stainless steel with plasma nitriding , YILDIZ FATİH,YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:KOVOVE MATERIALY-METALLIC MATERIALS ,2008, , 2008

Plasma nitriding behavior of Ti6Al4V orthopedic alloy , YILDIZ FATİH,YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2008, , 2008

Müzik Çalgıları da Bir Makinedir, Tipik Bir Örnek Olarak Bağlama Telli Çalgısı ve Unsurları , BÜLBÜL FERHAT, Yayın Yeri:Makine İhtisas ,2008, , 2008

Malzeme ve Yüzey Mühendisliği , BÜLBÜL FERHAT, Yayın Yeri:Metal Dünyası ,2008, , 2008

Kendinden Yağlayıcı, Sert, Aşınmaya Dirençli MoS2 Esaslı Kaplamalar Kullanmanın Avantajları (Çeviri) , BÜLBÜL FERHAT, Yayın Yeri:Mühendis ve Makina ,2008, , 2008

Elmas Benzeri Karbon ve Uygulama Alanları , BÜLBÜL FERHAT, Yayın Yeri:Machinery Makine Tek ,2008, , 2008

Elektriksiz Ni-B Kaplamalar , BÜLBÜL FERHAT,ALTUN HİKMET,KÜÇÜK ÖZKAN, Yayın Yeri:Metal Makina ,2008, , 2008

Effects of plasma nitriding on mechanical and tribological properties of CoCrMo alloy , ÇELİK AYHAN,BAYRAK ÖZGÜ,ALSARAN AKGÜN,KAYMAZ İRFAN,YETİM ALİ FATİH, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2008, , 2008

Effect of Plasma Nitrocarburizing on Fatigue Behavior of AISI 1020 Steel , KARAKAN MEHMET,YETİM ALİ FATİH,ÇELİK AYHAN,ALSARAN AKGÜN, Yayın Yeri:Kovove Materialy ,2008, , 2008

A comparative study the effect of surface treatments on the tribological properties of Ti 6Al 4V alloy , YETİM ALİ FATİH,ALSARAN AKGÜN,EFEOĞLU İHSAN,ÇELİK AYHAN, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2008, , 2008

The effect of bias voltage and working pressure on S Mo ratio at MoS2 Ti composite films , BÜLBÜL FERHAT,EFEOĞLU İHSAN,ARSLAN ERSİN, Yayın Yeri:Applied Surface Science ,2007, , 2007

Sıcaklık Destekli Kimyasal Yüzey İşlemleri , BÜLBÜL FERHAT, Yayın Yeri:Metal Dünyası ,2007, , 2007

MoS2-Ti Kompozit Katı Yağlayıcı Filmlerin Mikroyapı ve Tribolojik Özelliklerinin Belirlenmesi (Çeviri) , BÜLBÜL FERHAT, Yayın Yeri:Machinery Makine Tek ,2007, , 2007

Malzemelerde Yüzey Hasarı , BÜLBÜL FERHAT, Yayın Yeri:Metalurji Malzeme ,2007, , 2007

Katılarda Yayınma , BÜLBÜL FERHAT, Yayın Yeri:Metal Dünyası, ,2007, , 2007

Katı Yağlayıcılar , BÜLBÜL FERHAT, Yayın Yeri:Metalurji Malzeme ,2007, , 2007

Intake plenum volume and its influence on the engine performance cyclic variability and emissions , CEVİZ MEHMET AKİF, Yayın Yeri:Energy Conversion and Management ,2007, , 2007

İnce Filmlerin Büyüme Biçimleri , BÜLBÜL FERHAT, Yayın Yeri:Metal Dünyası ,2007, , 2007

Fatigue behaviour of duplex treated AISI316L stainless steel , ÇELİK AYHAN,YETİM ALİ FATİH,EFEOĞLU İHSAN, Yayın Yeri:Kovove Materialy ,2007, , 2007

Darbeli Manyetik Alanda Sıçratma ile Üretilen Neme Dirençli MoSx Filmler (Çeviri) , BÜLBÜL FERHAT, Yayın Yeri:Mühendis ve Makina ,2007, , 2007

Bir Doğal Kompozit Malzeme: Diş , BÜLBÜL FERHAT, Yayın Yeri:Makine Teknolojileri Elektronik Dergisi ,2007, , 2007

Aşınma Türleri , BÜLBÜL FERHAT, Yayın Yeri:Metal Dünyası ,2007, , 2007

Cyclic variations on LPG and gasoline fuelled lean burn SI engine , CEVİZ MEHMET AKİF,YÜKSEL FİKRET, Yayın Yeri:Renewable Energy ,2006, , 2006

Comparison of microstructure and tribological behaviour of plasma nitrided and nitrocarburized AISI 4140 steel , KARAKAN MEHMET,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Kovove Materialy, ,2006, , 2006

The effect of deposition parameters and Ti content on structural and wear properties of MoS2Ti coatings , ARSLAN ERSİN,BÜLBÜL FERHAT,ALSARAN AKGÜN,ÇELİK AYHAN,EFEOĞLU İHSAN, Yayın Yeri:Wear ,2005, , 2005

Temperature and air fuel ratio dependent specific heat ratio functions for lean burned and unburned mixture , CEVİZ MEHMET AKİF,KAYMAZ İRFAN, Yayın Yeri:Energy Conversion and Management ,2005, , 2005

Effects of ethanol unleaded gasoline blends on cyclic variability and emissions in an SI engine , CEVİZ MEHMET AKİF,YÜKSEL FİKRET, Yayın Yeri:Applied Thermal Engineering ,2005, , 2005

Effect of Magnetic Treatment on Fatigue Life of AISI 4140 Steel , ÇELİK AYHAN,YETİM ALİ FATİH,ALSARAN AKGÜN,KARAKAN MEHMET, Yayın Yeri:Materials and Design ,2005, , 2005

Effect of crystallographic orientation on the friction and wear properties of MoxSy Ti coatings by pulsed dc in nitrogen and humid air , EFEOĞLU İHSAN,BÜLBÜL FERHAT, Yayın Yeri:Wear ,2005, , 2005

The Structural and Tribological Properties of MoS2 Ti Composite Solid Lubricants , ARSLAN ERSİN,BÜLBÜL FERHAT,EFEOĞLU İHSAN, Yayın Yeri:Tribology Transactions ,2004, , 2004

A repair process of fatigue damage with plasma nitriding , ALSARAN AKGÜN,KAYMAZ İRFAN,ÇELİK AYHAN,YETİM ALİ FATİH,KARAKAN MEHMET, Yayın Yeri:Surface and CoatingTechnology ,2004, , 2004

Yüzey mühendisliğinde yeni bir yaklaşım dubleks yüzey işlemi , ALSARAN AKGÜN,ÇELİK AYHAN,KARAKAN MEHMET,YETİM ALİ FATİH, Yayın Yeri:Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi ,2003, , 2003

Thermal balance of a four stroke SI engine operating on hydrogen as a supplementary fuel , YÜKSEL FİKRET,CEVİZ MEHMET AKİF, Yayın Yeri:Energy ,2003, , 2003

Study on compound layer formed during plasma nitrocarburizing of AISI 5140 steel , ALSARAN AKGÜN,KARAKAN MEHMET,ÇELİK AYHAN,BÜLBÜL FERHAT,EFEOĞLU İHSAN, Yayın Yeri:Journal of Materials Science Letters ,2003, , 2003

Elemental Analysis of the Ashes of Main Thermal Power Plants in Turkey , NUHOĞLU YAŞAR,BÜLBÜL FERHAT, Yayın Yeri:Journal of Trace and Microprobe Techniques ,2003, , 2003

Hava Yönlendirici Güneş Kollektörleri , ÇOMAKLI ÖMER,YÜKSEL BEDRİ,YÜKSEL FİKRET, Yayın Yeri:Mühendis ve Makina ,1994, , 1994