Experimental Investigation of Horizontal Solar Stills Using Central Container and Transparent Material as Alternative to Glass Cover , KÖSE MURAT,AKYÜREK EDA FEYZA,AFŞAR FARAZ, Yayın Yeri:Heat Transfer Research ,2025, , 2025

Experimental evaluation and optimization of the heat pipes integrated thermoelectric generator using response surface methodology , MURATÇOBANOĞLU BURAK,AKYÜREK EDA FEYZA,MANAY EYÜPHAN, Yayın Yeri:Applied Thermal Engineering ,2025, , 2025

Advanced mini solar still design: Spiral heating, triangular prism condensation, and comprehensive energy-exergy analysis , AFŞAR FARAZ,KÖSE MURAT,AKYÜREK EDA FEYZA,MANDEV EMRE, Yayın Yeri:Energy for Sustainable Development ,2025, , 2025

Thermal performance investigation of microencapsulated phase change material enhanced with graphene nanoplatelets in double-glazing applications , Çelik Ali,CEVİZ MEHMET AKİF,KARA YUSUF ALİ,MANDEV EMRE,MURATÇOBANOĞLU BURAK,AFŞAR FARAZ,MANAY EYÜPHAN, Yayın Yeri:Energy and Buildings ,2024, , 2024

The effect of doping different amounts of boron on the corrosion resistance and biocompatibility of TiO2 nanotubes synthesized on SLM Ti6Al4V samples , ACAR MUHAMMET TAHA,ÇOMAKLI ONUR,YAZICI MUSTAFA,ARSLAN MEHMET ENES,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Surfaces and Interfaces ,2024, , 2024

The effect of different annealing temperatures on the mechanical and tribological properties of the Ti2AlN MAX phase films , ÇAKIR MUHAMMET, ÇİÇEK HİKMET, DURAN SEMİH, YILMAZ Ahmet Melik, GÜLTEN GÖKHAN, EFEOĞLU İHSAN, Yayın Yeri:Surface Engineering ,2024, , 2024

Selective laser melting of Ti6Al4V alloy: Effects of graphene-TiO2 nanotubes composites corrosion and biocompatibility , ÇOMAKLI ONUR,ARSLAN MEHMET ENES,ACAR MUHAMMET TAHA, Yayın Yeri:Journal of Alloys and Compounds ,2024, , 2024

Pulsed-dc bias magnetron sputtered TiB2 ceramic coating , BÜLBÜL FERHAT, EFEOĞLU İHSAN, Yayın Yeri:International Journal of Refractory Metals and Hard Materials Available ,2024, , 2024

Production of honeycomb-patterned hybrid Ti2AlN/TiNi films and examination of Mechanical, Tribological, Adhesion and Fatigue properties , DURAN SEMİH,ÇİÇEK HİKMET, Yayın Yeri:Surfaces and Interfaces ,2024, , 2024

Predictive modelling of laser powder bed fusion of Fe-based nanocrystalline alloys based on experimental data using multiple linear regression analysis , ÖZDEN MERVE GİZEM, Yayın Yeri:Heliyon ,2024, , 2024

PHASE CHANGE MATERIALS (PCMS) FOR BUILDINGS AND AUTOMOTIVE APPLICATIONS: A REVIEW STUDY , Tabatabaei Malazi Mahdi,AFŞAR FARAZ,KAYA KENAN, Yayın Yeri:Heat Transfer Research ,2024, , 2024

Multifunctional electroless nickel boron composite coatings incorporated by magnesium diboride ceramic particles , BÜLBÜL FERHAT,KARA ADEM, Yayın Yeri:International Journal of Ceramic Engineering and Science ,2024, , 2024

Long-term stability of novel surface-modified Fe3O4 nanoparticles used for preparing water based nanofluids , MURATÇOBANOĞLU BURAK,MANDEV EMRE,ŞAHİN BAYRAM,MANAY EYÜPHAN,Rahimpour Shabnam,Teimuri-Mofrad Reza,AFSHARI FARAZ, Yayın Yeri:Journal of Polytechnic-Politeknik Dergisi ,2024, , 2024

Investigation of hardness, tribological and adhesion properties of TiAlNiVN HEA films heat treated at different temperatures , YILMAZ Ahmet Melik,ÇİÇEK HİKMET,DURAN SEMİH,GÜLTEN GÖKHAN,EFEOĞLU İHSAN, Yayın Yeri:Tribology International ,2024, , 2024

Investigation of cabin heating in electric vehicles with integrating solar cells and heat storage systems , ÇELİK ALİ, Yayın Yeri:Journal of Energy Storage ,2024, , 2024

Influence of scanning velocity on Co24. 7Cr5Mo5. 4W alloy built via selective laser melting on roughness properties , Al-Aloosi Raghad Ahmed,Taha Ziad A.,ÇOMAKLI ONUR, Yayın Yeri:Iraqi Journal of Laser ,2024, , 2024

Influence of post processing on the mechanical properties and wear behavior of selective laser melted Co-Cr-Mo-W alloys , VAROL TEMEL,AKSA HÜSEYİN CAN,YILDIZ FATİH,AKÇAY SERHATCAN BERK,KAYA GÜRKAN,BEDER MURAT, Yayın Yeri:Tribology International ,2024, , 2024

Improving solar still efficiency through integration of cellulose-based water absorbers and Peltier condensation unit , MANDEV EMRE,MURATÇOBANOĞLU BURAK,ÇELİK ALİ,CEVİZ MEHMET AKİF,Di Nicola Giovanni,AFŞAR FARAZ, Yayın Yeri:Thermal Science and Engineering Progress ,2024, , 2024

Experimental study on the influence of inclination angle on phase change materials and natural convection during melting , YOLADI MEHMET,AKYÜREK EDA FEYZA,AFŞAR FARAZ, Yayın Yeri:Journal of Energy Storage ,2024, , 2024

EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS OF FERROFLUIDS IN THE PRESENCE OF MAGNETIC FIELD AND LAMINAR FLOW CONDITIONS , MURATÇOBANOĞLU BURAK,MANDEV EMRE,ÖMEROĞLU GÖKHAN,MANAY EYÜPHAN, Yayın Yeri:Heat Transfer Research ,2024, , 2024

Experimental comparative analysis of solar system productivity and performance in water distillation: Solar stills vs. parabolic dish systems , AFŞAR FARAZ, Yayın Yeri:Desalination ,2024, , 2024

EXPERIMENTAL AND NUMERICAL STUDY ON SOLAR ENERGY STORAGE IN BLACK-COVERED SUNSPACE USING WATER-FILLED TIN CANS , AFŞAR FARAZ,MANDEV EMRE,MURATÇOBANOĞLU BURAK,ÇELİK ALİ,CEVİZ MEHMET AKİF, Yayın Yeri:Journal of Enhanced Heat Transfer ,2024, , 2024

EXPERIMENTAL AND NUMERICAL STUDY ON EFFECTS OF NEW-GENERATION FINNED HEAT EXCHANGER ON THERMAL PERFORMANCE OF THERMOELECTRIC COOLING SYSTEMS , MURATÇOBANOĞLU BURAK,MANDEV EMRE,ÖMEROĞLU GÖKHAN,AKPINAR FATİH,ÖZ ERKAN,AFSHARI FARAZ, Yayın Yeri:Heat Transfer Research ,2024, , 2024

Enhancing high cycle fatigue performance of plasma nitrided AISI 4140 steel by post-aging treatment and direct current magnetic field , YETİM ALİ FATİH,KOVACI HALİM,TEKDİR HİLMİ,SEÇER KAVASOĞLU YEŞİM,BOZKURT YUSUF BURAK,ÇELİK AYHAN, Yayın Yeri:Materials Today Communications ,2024, , 2024

Effects of Selective Laser Melting Process Parameters on Structural, Mechanical, Tribological and Corrosion Properties of CoCrFeMnNi High Entropy Alloy , BULUT CANER,YILDIZ FATİH,VAROL TEMEL,KAYA GÜRKAN,ERGÜDER TEVFİK OĞUZHAN, Yayın Yeri:Metals and Materials International ,2024, , 2024

Development of a novel two-way 3D printed flexible spiral composite actuator based on shape memory alloy wire and its control , ÖNDER ERAY TEOMAN,SÜMER BİLSAY,BAŞLAMIŞLI SELAHATTİN ÇAĞLAR, Yayın Yeri:Smart Materials and Structures ,2024, , 2024

Designing a Novel Porous Fixation Plate with a Gyroid Lattice Structure for Humerus Fractures Using a Probabilistic Approach , KAYMAZ İRFAN, YAVUZ OSMAN, MURAT FAHRİ, KORKMAZ İSMAİL HAKKI, Yayın Yeri:Advanced Engineering Materials ,2024, , 2024

Desalination performance evaluation of a solar still enhanced by thermoelectric modules , MANDEV EMRE,MURATÇOBANOĞLU BURAK,MANAY EYÜPHAN,ŞAHİN BAYRAM, Yayın Yeri:Solar Energy ,2024, , 2024

Comparison of Short Implant, Angled Implant, Distal Extension and Grafting Methods for Atrophic Maxillary Posterior Region: a Finite Element Study , KAPTI YAKUP, KORKMAZ İSMAİL HAKKI, YANIKOĞLU NURAN, Yayın Yeri:Journal of Medical and Biological Engineering ,2024, , 2024

Centrifugally spun hydroxyapatite/carbon composite nanofiber scaffolds for bone tissue engineering , AKGÜL YASİN,Stojanovska Elena,ÇALIŞIR MEHMET DURMUŞ,POLAT YUSUF,KILIÇ ALİ, Yayın Yeri:Functional Composites and Structures ,2024, , 2024

BN-TiO2 multilayer coating on AZ91 for enhanced corrosion performance in marine environments , MELETLİOĞLU Emrah,ÇOMAKLI ONUR, Yayın Yeri:Matéria (Rio de Janeiro) ,2024, , 2024

Application of honeycomb pattern to Ti2AlN MAX phase films by plasma etching , DURAN SEMİH,ÇİÇEK HİKMET,KORKMAZ İSMAİL HAKKI,EFEOĞLU İHSAN, Yayın Yeri:Applied Physics A ,2024, , 2024

Analysis of the Mechanical and Physical Behaviors of 3D-Printed PEEK Structures under Different Parameters , MURAT FAHRİ,YAVUZ OSMAN,TEMEL MUHAMMED SEFA,KORKMAZ İSMAİL HAKKI,KAYMAZ İRFAN, Yayın Yeri:International Journal of Pioneering Technology and Engineering ,2024, , 2024

A study on properties of electroless Ni-B/MgB2 coatings on AZ91 magnesium alloy , BÜLBÜL FERHAT,KILCI TUĞÇENUR, Yayın Yeri:Heliyon ,2024, , 2024

A comprehensive review of solar cooking systems , CEVİZ MEHMET AKİF,MURATÇOBANOĞLU BURAK,MANDEV EMRE,AFSHARI FARAZ, Yayın Yeri:WIREs Energy and Environment ,2024, , 2024

Wear and Thermal Behavior of TiAlN Thin Films onto Ti6Al4V Alloy Manufactured by Selective Laser Melting Method , KAYA GÜRKAN, ERGÜDER TEVFİK OĞUZHAN, HACISALİHOĞLU İLYAS, MANDEV EMRE, MANAY EYÜPHAN, YILDIZ FATİH, Yayın Yeri:3D PRINTING AND ADDITIVE MANUFACTURING ,2023, , 2023

Utilization of recyclable aluminum cans as fins in a vertical solar air heating system: An experimental and numerical study , KHANLARI ATAOLLAH, TUNCER AZİM DOĞUŞ, AFŞAR FARAZ, SÖZEN GÜLÇE, Yayın Yeri:Journal of Building Engineering ,2023, , 2023

Tribological performance of ceramic-based films under different tribo-test media and vacuum conditions , MANDEV Yeşim Zeynep, YETİM ALİ FATİH, Yayın Yeri:Central Library of the Slovak Academy of Sciences ,2023, , 2023

Tribological behavior of plasma-sprayed Yttria-stabilized zirconia thermal barrier coatings on 316L stainless steel under high-temperature conditions , YETİM ALİ FATİH, TEKDİR HİLMİ, TURALIOĞLU KEREM, Taftalı Merve, YETİM TUBA, Yayın Yeri:Elsevier BV ,2023, , 2023

Thermal analysis of Fe3O4/water nanofluid in spiral and serpentine mini channels by using experimental and theoretical models , AFŞAR FARAZ, MURATÇOBANOĞLU BURAK, Yayın Yeri:International Journal of Environmental Science and Technology ,2023, , 2023

THE EFFECTS OF CIRCULAR INSERTS ON THE THERMAL AND FLOW CHARACTERISTICS IN A HORIZONTAL PIPE EXCHANGER: A NUMERICAL INVESTIGATION , YEŞİLYURT MUHAMMET KAAN, ADIGÜZEL NESRİN, YILDIRIM ORHAN, ÇOMAKLI ÖMER, AFŞAR FARAZ, Yayın Yeri:Kütahya Dumlupinar Üniversitesi ,2023, , 2023

The effect of geometry on joint strength in adhesively bonded joints with the same adhesive area , AKPINAR SALİH, HACISALİHOĞLU İLYAS, ÇALIK AHMET, Yayın Yeri:Mechanics of Advanced Materials and Structures ,2023, , 2023

The effect of fiber length and structure on joint strength in bonded joints with fiber-reinforced composite adhesive , ÇALIK AHMET, AKPINAR SALİH, Yayın Yeri:International Journal of Adhesion & Adhesives ,2023, , 2023

The effect of co-creation of notches and recesses in the adhered material on the strength of single-lap adhesive joints: Experimental and numerical analysis , BAYRAMOĞLU SİMAY, AKPINAR SALİH, Yayın Yeri:International Journal of Adhesion & Adhesives ,2023, , 2023

Synthesis and characterisation of single and duplex ZnO/TiO2 ceramic films on additively manufactured bimetallic material of 316L stainless steel and Ti6Al4V , YETİM TUBA, TEKDİR HİLMİ, Taftalı Merve, TURALIOĞLU KEREM, YETİM ALİ FATİH, Yayın Yeri:IOP Publishing ,2023, , 2023

Superamphiphobic TiO2 Film by Sol–Gel Dip Coating Method on Commercial Pure Titanium , ASLAN ÇAKIR MEVRA, YETİM TUBA, YETİM ALİ FATİH, ÇELİK AYHAN, Yayın Yeri:Springer Science and Business Media LLC ,2023, , 2023

Study on a novel inclined solar water distillation system using thermoelectric module for condensation , AFŞAR FARAZ,MANDEV EMRE,ÇELİK ALİ, Yayın Yeri:Process Safety and Environmental Protection ,2023, , 2023

Structural and tribological properties of TiSiN films with different Si content , ÇİÇEK HİKMET, ACAR YUNUS EMRE, DURAN SEMİH, YILMAZ Ahmet Melik, ÇAKIR Muhammet, Yayın Yeri:Thin Solid Films ,2023, , 2023

Soğuk iklim bölgelerinde LEED sertifikalı eğitim binasının pandemi bağlamında değerlendirilmesi , ÇELİK ALİ, Yayın Yeri:Gümüşhane Üniversitesi Fen Bilimleri Dergisi ,2023, , 2023

Soft-Magnetic Behavior of Fe-Based Nanocrystalline Alloys Produced Using Laser Powder Bed Fusion , ÖZDEN MERVE GİZEM, Yayın Yeri:ADVANCED ENGINEERING MATERIALS ,2023, , 2023

Service Life Modelling of Single Lap Joint Subjected to Cyclic Bending Load , DEMİRAL MURAT, Abbassi Fethi, Muhammad Riaz, AKPINAR SALİH, Yayın Yeri:MDPI Aerospace ,2023, , 2023

Performance Analysis of Thermo-Electric Cooling Systems Equipped with Surface-Modified and Recycled Nanofluids , MANDEV EMRE, MURATÇOBANOĞLU BURAK, MANAY EYÜPHAN, ŞAHİN BAYRAM, TEİMURİ-MOFRAD REZA, RAHİMPOUR SHABNAM, AFSHARI FARAZ, Yayın Yeri:JOURNAL OF ENHANCED HEAT TRANSFER ,2023, , 2023

Optimizing laser additive manufacturing process for Fe-based nano-crystalline magnetic materials , ÖZDEN MERVE GİZEM, Yayın Yeri:Journal of Alloys and Compounds ,2023, , 2023

Investigation of subcrestally placed dental implants with and without apical cortical bone anchorage under conventional or immediate loading , AYDIN TUĞBA, KORKMAZ İSMAİL HAKKI, ŞAHİN AHMET BEDREDDİN, KAYMAZ İRFAN, Yayın Yeri:Elsevier BV ,2023, , 2023

Investigation of mechanical, tribological and magnetic properties after plasma nitriding of AISI 316L stainless steel produced with different orientations angles by selective laser melting , YAZICI MUSTAFA, ÇOMAKLI ONUR, YETİM TUBA, YETİM ALİ FATİH, ÇELİK AYHAN, Yayın Yeri:Elsevier BV ,2023, , 2023

Influence of carbon and glass fiber reinforced composite adhesive on the strength of adhesively bonded joints , AKPINAR SALİH, AVİNÇ AKPINAR İCLAL, Yayın Yeri:Materials Testing ,2023, , 2023

Experimental Study to Evaluate Effect of Source Temperature on COP and Compressor Status in Water-to-Air Heat Pumps , CEVİZ MEHMET AKİF, AFSHARI FARAZ, CEYLAN MURAT, MURATÇOBANOĞLU BURAK, MANDEV EMRE, GELEN GÖKHAN, Yayın Yeri:HEAT TRANSFER RESEARCH ,2023, , 2023

Experimental and numerical study on air-to-nanofluid thermoelectric cooling system using novel surface-modified Fe3O4 nanoparticles , AFSHARI FARAZ, MANDEV EMRE, RAHİMPOUR SHABNAM, MURATÇOBANOĞLU BURAK, ŞAHİN BAYRAM, MANAY EYÜPHAN, TEİMURİ-MOFRAD REZA, Yayın Yeri:MICROFLUIDICS AND NANOFLUIDICS ,2023, , 2023

Experimental and numerical study on a novel fanless air-to-air solar thermoelectric refrigerator equipped with boosted heat exchanger , AFSHARI FARAZ, MANDEV EMRE, MURATÇOBANOĞLU BURAK, YETİM ALİ FATİH, CEVİZ MEHMET AKİF, Yayın Yeri:Elsevier BV ,2023, , 2023

Experimental and numerical investigation of flow and thermal characteristics of aluminum block exchanger using surface-modified and recycled nanofluids , GÜLMÜŞ BERRAK, MURATÇOBANOĞLU BURAK, MANDEV EMRE, AFSHARI FARAZ, Yayın Yeri:INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW ,2023, , 2023

Experimental and numerical analysis of a grooved hybrid photovoltaic-thermal solar drying system , TUNCER AZİM DOĞUŞ, KHANLARI ATAOLLAH, AFŞAR FARAZ, SÖZEN ADNAN, ÇİFTÇİ ERDEM, KUSUN Barış, Şahinkesen İstemihan, Yayın Yeri:Applied Thermal Engineering ,2023, , 2023

Experimental analysis of energy storage performance of phase change materials in horizontal double-glazing applications , CEVİZ MEHMET AKİF,MANDEV EMRE,MURATÇOBANOĞLU BURAK,ÇELİK ALİ,AFŞAR FARAZ, Yayın Yeri:JOURNAL OF ENERGY STORAGE ,2023, , 2023

Exergy analysis and optimization of multiple injection parameters of a diesel engine with Taguchi method , GÜNER ERDOĞAN, KALTAKKIRAN GALİP, BAKIRCI KADİR, CEVİZ MEHMET AKİF, Yayın Yeri:Informa UK Limited ,2023, , 2023

Estimation of heat transfer model parameters by using recursive least square (RLS) method for a shape memory alloy wire , ÖNDER ERAY TEOMAN, SÜMER BİLSAY, BAŞLAMIŞLI SELAHATTİN ÇAĞLAR, Yayın Yeri:Journal of Intelligent Material Systems and Structures ,2023, , 2023

Enhancing Soft-Magnetic Properties of Fe-Based Nanocrystalline Materials with a Novel Double-Scanning Technique , ÖZDEN MERVE GİZEM, Yayın Yeri:ADVANCED ENGINEERING MATERIALS ,2023, , 2023

Effects of process parameters on selective laser melting of Ti6Al4V-ELI alloy and parameter optimization via response surface method , KAYA GÜRKAN, YILDIZ FATİH, KORKMAZ İSMAİL HAKKI, KAYMAZ İRFAN, YETİM ALİ FATİH, Ergüder Tevfik Oğuzhan, Şen Çağdaş, Yayın Yeri:Elsevier BV ,2023, , 2023

EFFECTS OF NANOPARTICLE SIZE ON PROPERTIES OF NANOFLUID AND HEAT TRANSFER ENHANCEMENT IN SPIRAL EXCHANGER USING TURBULATORS , MURATÇOBANOĞLU BURAK, AFŞAR FARAZ, Yayın Yeri:Nanoscience and Technology: An International Journal ,2023, , 2023

Effects of double glazing, black wall, black carpeted floor and insulation on thermal performance of solar-glazed balconies , AFSHARI FARAZ, MURATÇOBANOĞLU BURAK, MANDEV EMRE, CEVİZ MEHMET AKİF, MİRZAEE ZİBA, Yayın Yeri:ENERGY AND BUILDINGS ,2023, , 2023

Effects of build orientation and hatch spacing on high-speed milling behavior of L-PBF 316L stainless steel , KAYA GÜRKAN, KÖKLÜ UĞUR, ERGÜDER Tevfik Oğuzhan, CENGİZ FURKAN, YILDIZ FATİH, Yayın Yeri:Walter de Gruyter GmbH ,2023, , 2023

Effect of uncertain quantities on the stability analysis of a miniscrew anchorage system , KAYMAZ İRFAN, ALİBEYOĞLU FATİH, DAĞSUYU İLHAN METİN, Yayın Yeri:Informa UK Limited ,2023, , 2023

Effect of thermal oxidation on structural and tribological properties of MoS2 films , ÇİÇEK HİKMET, GÖZÜBÜYÜK ÖZKAN, EFEOĞLU İHSAN, Yayın Yeri:Lubrication Science ,2023, , 2023

Effect of solution-blown nanofibrous web on quasi-static punch shear test results and quasi-static indentation behavior of carbon fiber-reinforced epoxy matrix composites , AYTEN ALİ İMRAN, POLAT YUSUF, SEYHAN AYBENİZ, ŞAHBAZ MEHMET, Yayın Yeri:SAGE Publications ,2023, , 2023

Effect of bilayer numbers on structural, mechanical, tribological and corrosion properties of TiO2–SiO2 multilayer film-coated β-type Ti45Nb alloys , ÇOMAKLI ONUR, YAZICI MUSTAFA, Demir Merve, YETİM ALİ FATİH, ÇELİK AYHAN, Yayın Yeri:Elsevier BV ,2023, , 2023

Development of optimal diesel injection strategy based on the prediction of performance and emissions using deep neural network , GÜNER ERDOĞAN, KALELİ ALİRIZA, BAKIRCI KADİR, CEVİZ MEHMET AKİF, Yayın Yeri:INTERNATIONAL JOURNAL OF ENGINE RESEARCH ,2023, , 2023

Determining the Optimum Process Parameters of Selective Laser Melting via Particle Swarm Optimization Based on the Response Surface Method , MURAT FAHRİ, KAYMAZ İRFAN, ŞENSOY ABDULLAH TAHİR, KORKMAZ İSMAİL HAKKI, Yayın Yeri:Metals and Materials International ,2023, , 2023

Critical Assessment of the Bonded Single Lap Joint Exposed to Cyclic Tensile Loading , DEMİRAL MURAT, Abbassi Fethi, Zahedi Abolfazl, AKPINAR SALİH, Yayın Yeri:Aerospace ,2023, , 2023

Computational fluid dynamics simulation and experimental investigation of a thermoelectric system for predicting influence of applied voltage and cooling water on cooling performance , CEVİZ MEHMET AKİF, AFŞAR FARAZ, MURATÇOBANOĞLU BURAK, CEYLAN MURAT, MANAY EYÜPHAN, Yayın Yeri:International Journal of Numerical Methods for Heat and Fluid Flow ,2023, , 2023

Comparison of structural and wear properties of AlSi(N-O) films , ÇİÇEK HİKMET, YILDIZ KÜBRA, Yayın Yeri:Inderscience Publishers ,2023, , 2023

Comparison of 3D accuracy of three different digital intraoral scanners in full-arch implant impressions , AKKAL ÖZCAN, KORKMAZ İSMAİL HAKKI, BAYINDIR FUNDA, Yayın Yeri:Journal of Advanced Prosthodontics ,2023, , 2023

CFD simulation and experimental analysis of cooling performance for thermoelectric cooler with liquid cooling heat sink , MURATÇOBANOĞLU BURAK, MANDEV EMRE, CEVİZ MEHMET AKİF, MANAY EYÜPHAN, AFSHARI FARAZ, Yayın Yeri:JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY ,2023, , 2023

CFD analysis and experimental investigation to determine the flow characteristics around NACA 4412 airfoil blades at different wind speeds and blade angles , AFŞAR FARAZ, KHANLARI ATAOLLAH, SÖZEN ADNAN, TUNCER AZİM DOĞUŞ, ATEŞ İBRAHİM, ŞAHİN BAYRAM, Yayın Yeri:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering ,2023, , 2023

AN EXPERIMENTAL INVESTIGATION TO PREDICT OPTIMUM CHARGE OF A HEAT PUMP SYSTEM , AFŞAR FARAZ, KHANLARI ATAOLLAH, TUNCER AZİM DOĞUŞ, SÖZEN ADNAN, Yayın Yeri:Heat Transfer Research ,2023, , 2023

A Study Using the Hybrid Fuzzy AHP&TOPSIS Method in the Conversion of a LEED-Certified Education Building into a Nearly Zero-Energy Building in a Cold Climate , ÇELİK ALİ,ŞAHİN BAYRAM,MANAY EYÜPHAN,BALIN ABİT, Yayın Yeri:Strojniški vestnik-Journal of Mechanical Engineering ,2023, , 2023

A Study Using the Hybrid Fuzzy AHP&TOPSIS Method in the Conversion of a LEED-Certified Education Building into a Nearly Zero-Energy Building in a Cold Climate , Çelik Ali, ŞAHİN BAYRAM, MANAY EYÜPHAN, BALIN ABİT, Yayın Yeri:Journal of Mechanical Engineering ,2023, , 2023

A novel ignition timing strategy to regulate the energy balance during the warm up phase of an SI engine , KÖKSAL HÜSEYİN, CEVİZ MEHMET AKİF, YAKUT KENAN, KALTAKKIRAN GALİP, ÖZAKIN AHMET NUMAN, Yayın Yeri:Elsevier BV ,2023, , 2023

A comprehensive study on the fatigue properties of duplex surface treated Ti6Al4V by plasma nitriding and DLC coating , YETİM ALİ FATİH, KOVACI HALİM, UZUN YAKUP, TEKDİR HİLMİ, ÇELİK AYHAN, Yayın Yeri:Elsevier BV ,2023, , 2023

Computational fluid dynamics simulation and experimental investigation of a thermoelectric system for predicting influence of applied voltage and cooling water on cooling performance , CEVİZ MEHMET AKİF, AFSHARI FARAZ, MURATÇOBANOĞLU BURAK, CEYLAN MURAT, MANAY EYÜPHAN, Yayın Yeri:International Journal of Numerical Methods for Heat & Fluid Flow ,2023, , 2023

Tribological and machining performance of tungsten carbide cutting tool material coated with different carbon nitride films , Dumlu Fırat, ERGÜDER Tevfik Oğuzhan, KAYA GÜRKAN, HACISALİHOĞLU İLYAS, YILDIZ FATİH, Yayın Yeri:International Journal of Surface Science and Engineering ,2022, , 2022

Tribocorrosion properties and mechanism of a shot peened AISI 4140 low-alloy steel , BOZKURT YUSUF BURAK, KOVACI HALİM, YETİM ALİ FATİH, ÇELİK AYHAN, Yayın Yeri:Surface and Coatings Technology ,2022, , 2022

The effect of stepped notches and recesses on joint strength in adhesive bonded joints: Experimental and numerical analysis , HACISALİHOĞLU İLYAS, AKPINAR SALİH, Yayın Yeri:Theoretical and Applied Fracture Mechanics ,2022, , 2022

Synthesis and characterization of wear and corrosion resistant Ni-doped Al2O3 nanocomposite ceramic coatings by sol-gel method , YETİM TUBA, TURALIOĞLU KEREM, Taftalı Merve, TEKDİR HİLMİ, KOVACI HALİM, YETİM ALİ FATİH, Yayın Yeri:Surface and Coatings Technology ,2022, , 2022

Surface Modification of Fe3O4 Nanoparticles for Preparing Stable Water-Based Nanofluids , MANDEV EMRE, MANAY EYÜPHAN, RAHİMPOUR SHABNAM, MOHAMMADZADEH ALİ, ŞAHİN BAYRAM, AFSHARI FARAZ, TEİMURİ-MOFRAD REZA, Yayın Yeri:Heat Transfer Research ,2022, , 2022

Su Bazlı Nanoakışkanların Hazırlanmasında Kullanılan Yeni Yüzey Modifiye Fe3O4 Nanopartiküllerinin Uzun Vadeli Kararlılıklarının İncelenmesi , MURATÇOBANOĞLU BURAK, MANDEV EMRE, ŞAHİN BAYRAM, MANAY EYÜPHAN, RAHİMPOUR SHABNAM, TEİMURİ-MOFRAD REZA, AFSHARI FARAZ, Yayın Yeri:Politeknik Dergisi ,2022, , 2022

Performance analysis of air-to-water binary thermoelectric Peltier cooling systems and determination of optimum arrangement , AFSHARI FARAZ, CEVİZ MEHMET AKİF, MANAY EYÜPHAN, CEYLAN MURAT, MURATÇOBANOĞLU BURAK, Yayın Yeri:Journal of the Brazilian Society of Mechanical Sciences and Engineering ,2022, , 2022

Numerical and experimental investigation of a solar absorber extension tube with turbulators for upgrading the performance of a solar dryer , KHANLARI ATAOLLAH, AFŞAR FARAZ, SÖZEN ADNAN, TUNCER AZİM DOĞUŞ, KUSUN Barış, Yayın Yeri:International Journal of Numerical Methods for Heat and Fluid Flow ,2022, , 2022

Numerical and experimental analysis of parallel-pass forced convection solar air heating wall with different plenum and absorber configurations , KHANLARI ATAOLLAH, SÖZEN ADNAN, AFŞAR FARAZ, TUNCER AZİM DOĞUŞ, AĞBULUT ÜMİT, AYTAÇ YILMAZ ZEYNEP, Yayın Yeri:International Journal of Numerical Methods for Heat and Fluid Flow ,2022, , 2022

Investigation of the Type of Angled Abutment for Anterior Maxillary Implants: A Finite Element Analysis , KORKMAZ İSMAİL HAKKI, KUL ESRA, Yayın Yeri:Journal of Prosthodontics ,2022, , 2022

Investigation of the Structural and Tribological Properties of 316L Stainless Steel Manufactured Using Variable Production Parameters by Selective Laser Melting , Gençoğlu Ufuk, KAYA GÜRKAN, ERGÜDER Tevfik Oğuzhan, HACISALİHOĞLU İLYAS, YILDIZ FATİH, Yayın Yeri:Journal of Materials Engineering and Performance ,2022, , 2022

Instantaneous energy balance and performance analysis during warm up period of a spark ignition engine under several thermal energy management strategies , KALTAKKIRAN GALİP, CEVİZ MEHMET AKİF, BAKIRCI KADİR, Yayın Yeri:Elsevier BV ,2022, , 2022

Improvement of structural/tribological properties and milling performances of tungsten carbide cutting tools by bilayer TiAlN/TiSiN and monolayer AlCrSiN ceramic films , Çam Ali Sezer, ERGÜDER Tevfik Oğuzhan, KAYA GÜRKAN, YILDIZ FATİH, Yayın Yeri:Ceramics International ,2022, , 2022

Improvement of polyethylene fiber wettability and mechanical properties through an environmentally sustainable spinning process , SEYHAN AYBENİZ, GUNAYDIN BEYZA NUR, POLAT YUSUF, KILIÇ ALİ, DEMİR ALİ, AVCI HÜSEYİN, Yayın Yeri:International Journal of Adhesion and Adhesives ,2022, , 2022

Experimental Investigation on Heat Transfer of Al2O3-MWCNT/Water-Based Hybrid Nanofluids in Double-Pipe Mini Heat Exchanger: Design of Experiment Using RSM , GELİŞ KADİR, AKYÜREK EDA FEYZA, Yayın Yeri:Heat Transfer Research ,2022, , 2022

Evaluation of Graft Harvesting Operations from Anterior and Posterior Iliac Donor Sites by Finite Element Analysis , ŞENSOY ABDULLAH TAHİR, KORKMAZ İSMAİL HAKKI, ALİBEYOĞLU FATİH, KAYMAZ İRFAN, Yayın Yeri:Caucasian Journal of Science ,2022, , 2022

Effects of surface roughness in multiple microchannels on mixed convective heat transfer , MANDEV EMRE, MANAY EYÜPHAN, Yayın Yeri:APPLIED THERMAL ENGINEERING ,2022, , 2022

Effects of secondary fluid flow rate on cooling performance of vapor compression systems , AFSHARI FARAZ, ÇİLOĞLU DOĞAN, CEVİZ MEHMET AKİF, CEYLAN MURAT, Yayın Yeri:Gumushane University Journal of Science and Technology Institute ,2022, , 2022

Effects of fabrication parameters and post-processing treatments on the mechanical and tribological behavior of surface-enhanced copper based materials by selective laser melting , AKSA Hüseyin Can, HACISALİHOĞLU İLYAS, YILDIZ FATİH, VAROL TEMEL, GÜLER ONUR, KAYA GÜRKAN, AKÇAY SERHATCAN BERK, Yayın Yeri:Journal of Materials Processing Technology ,2022, , 2022

Effect of heat exchanger base thickness and cooling fan on cooling performance of Air-To-Air thermoelectric refrigerator; experimental and numerical study , AFSHARI FARAZ, CEVİZ MEHMET AKİF, MANDEV EMRE, YILDIZ FATİH, Yayın Yeri:SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS ,2022, , 2022

Dört Nokta Eğme Yüküne Maruz Yapıştırma Bağlantılarında İç Kademenin Bağlantı Hasar Yüküne Etkisi: Deneysel ve Sayısal Analiz , ÇALIK AHMET, AKPINAR SALİH, Yayın Yeri:Osmaniye Korkut Ata Universitesi ,2022, , 2022

Developing an in-Line method to improve mechanical and flame retardancy performance of polyethylene fiber , Günaydın Beyza Nur, SEYHAN AYBENİZ, POLAT YUSUF, KILIÇ ALİ, DEMİR ALİ, ÜREYEN MUSTAFA ERDEM, AVCI HÜSEYİN, Yayın Yeri:SAGE Publications ,2022, , 2022

Determination of the Effect of TiN Coating on Self-Fitting Properties of Dental Implants Made of NiTi Alloy , KORKMAZ İSMAİL HAKKI, SAĞLAM MİRAÇ, Yayın Yeri:ACS Biomaterials Science & Engineering ,2022, , 2022

Designing and In Vitro Testing of a Novel Patient-Specific Total Knee Prosthesis Using the Probabilistic Approach , KORKMAZ İSMAİL HAKKI, KAYMAZ İRFAN, YILDIRIM ÖMER SELİM, MURAT FAHRİ, KOVACI HALİM, Yayın Yeri:Biomedical Engineering-Biomedizinische Technik ,2022, , 2022

COMBINED FREE AND FORCED CONVECTION OF NANOFLUIDS IN MINICHANNELS WITH DIFFERENT DIAMETERS , AKYÜREK EDA FEYZA, CEYLAN MURAT, MANAY EYÜPHAN, ŞAHİN BAYRAM, Yayın Yeri:Heat Transfer Research ,2022, , 2022

Assessing the Effect of Interimplant Distance and Angle on Different Impression Techniques , ALBAYRAK BERKMAN, KORKMAZ İSMAİL HAKKI, WEE ALVIN G., SUKOTJO CORTINO, BAYINDIR FUNDA, Yayın Yeri:Machines ,2022, , 2022

Al2O3-MWCNT/saf su hibrit nanoakiskaninin isil iletkenlik ve viskozite degerlerinin belirlenmesi , AKYÜREK EDA FEYZA, Yayın Yeri:Gümüşhane Üniversitesi Fen Bilimleri Dergisi ,2022, , 2022

A study on the effects of nanostructure reinforcement on the failure load in adhesively bonded joints after the subjected to fully reversed fatigue load , AKPINAR SALİH, DEMİR KÜBRA, GAVGALI ESMA, YETİM ALİ FATİH, Yayın Yeri:The Journal of Adhesion ,2022, , 2022

A REVIEW STUDY ON FACTORS AFFECTING THE STABILITY OF NANOFLUIDS , AFSHARI FARAZ, MANAY EYÜPHAN, Rahimpour Shabnam, ŞAHİN BAYRAM, MURATÇOBANOĞLU BURAK, Teimuri-Mofrad Reza, Yayın Yeri:Heat Transfer Research ,2022, , 2022

A New Design for the Humerus Fixation Plate Using a Novel Reliability-Based Topology Optimization Approach to Mitigate the Stress Shielding Effect , KAYMAZ İRFAN, MURAT FAHRİ, KORKMAZ İSMAİL HAKKI, YAVUZ OSMAN, Yayın Yeri:Clinical Biomechanics ,2022, , 2022

A comprehensive survey on utilization of hybrid nanofluid in plate heat exchanger with various number of plates , AFŞAR FARAZ, TUNCER AZİM DOĞUŞ, SÖZEN ADNAN, VARİYENLİ HALİL İBRAHİM, KHANLARI ATAOLLAH, GÜRBÜZ EMİNE YAĞIZ, Yayın Yeri:INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW ,2022, , 2022

Tribological Properties of TiNi/MoS2 Functional Coatings , ÇİÇEK HİKMET, Ozan Can AKAR, EFEOĞLU İHSAN, Yayın Yeri:Journal of Materials Engineering and Performance ,2021, , 2021

Tribological and thermal properties of plasma nitrided Ti45Nb alloy , HACISALİHOĞLU İLYAS, KAYA GÜRKAN, ERGÜDER TEVFİK OĞUZHAN, MANDEV EMRE, MANAY EYÜPHAN, YILDIZ FATİH, Yayın Yeri:SURFACES AND INTERFACES ,2021, , 2021

Triad of foot deformities and its conservative treatment: With a 3D customized insole , YILDIZ KADRİ, MEDETALİBEYOĞLU FATİH, KAYMAZ İRFAN, Yayın Yeri:Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine ,2021, , 2021

Three‐Dimensional Accuracy of Conventional Versus Digital Complete Arch Implant Impressions , ALBAYRAK BERKMAN, SUKOTJO CORTINO, WEE ALVIN G, KORKMAZ İSMAİL HAKKI, BAYINDIR FUNDA, Yayın Yeri:Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry ,2021, , 2021

The tribological and corrosion properties of anodized Ti6Al4V/316L bimetallic structures manufactured by additive manufacturing , TURALIOĞLU Kerem, TAFTALI Merve, TEKDİR HİLMİ, ÇOMAKLI ONUR, YAZICI MUSTAFA, YETİM TUBA, YETİM ALİ FATİH, Yayın Yeri:Surface and Coatings Technology ,2021, , 2021

The performance improvement of direct injection engines in cold start conditions integrating with phase change material: Energy and exergy analysis , KALTAKKIRAN GALİP, CEVİZ MEHMET AKİF, Yayın Yeri:JOURNAL OF ENERGY STORAGE ,2021, , 2021

The fracture load analysis of different material thickness in adhesively bonded joints subjected to fully reversed bending fatigue load , AKPINAR SALİH, Şahin Resul, Yayın Yeri:Theoretical and Applied Fracture Mechanics ,2021, , 2021

The effects of nanostructure additive on fracture strength in adhesively bonded joints subjected to fully reversed four-point bending fatigue load , DEMİR KÜBRA, GAVGALI ESMA, YETİM ALİ FATİH, AKPINAR SALİH, Yayın Yeri:International Journal of Adhesion and Adhesives ,2021, , 2021

The effects of build orientation and hatch spacing on mechanical properties of medical Ti6Al4V alloy manufactured by selective laser melting , HACISALİHOĞLU İLYAS, YILDIZ FATİH, ÇELİK AYHAN, Yayın Yeri:Materials Science and Engineering: A ,2021, , 2021

The effects of adherend thickness on the fatigue strength of adhesively bonded single-lap joints , Şahin Resul, AKPINAR SALİH, Yayın Yeri:International Journal of Adhesion and Adhesives ,2021, , 2021

The Effect of Selective Laser Melting Process on the Microstructure, Density, and Electrical Conductivity of Silver-Coated Copper Cores , VAROL TEMEL, HACISALİHOĞLU İLYAS, KAYA GÜRKAN, GÜLER ONUR, YILDIZ FATİH, AKSA HÜSEYİN CAN, AKÇAY SERHATCAN BERK, Yayın Yeri:Journal of Materials Engineering and Performance ,2021, , 2021

The effect of play-wear on surface roughness of steel music strings , BÜLBÜL FERHAT, SÖNMEZ ERDAL, EZİRMİK KADRİ VEFA, Yayın Yeri:Journal of Nature, Science & Technology (JANSET) ,2021, , 2021

Structure and adhesion properties of TiNi/MoS2 coatings , ÇİÇEK HİKMET, Ozan Can AKAR, EFEOĞLU İHSAN, Yayın Yeri:Ceramics International ,2021, , 2021

Solution blown nanofibrous air filters modified with glass microparticles , POLAT YUSUF,ÇALIŞIR MEHMET DURMUŞ,GÜNGÖR MELİKE,SAĞIRLI MERVE NUR,ATAKAN RAZİYE,AKGÜL YASİN,DEMİR ALİ,KILIÇ ALİ, Yayın Yeri:Journal of Industrial Textiles ,2021, , 2021

NUMERICAL STUDY ON DRAG COEFFICIENT AND EVALUATION OF THE FLOW PATTERNS IN PERFORATED PARTICLES , AFŞAR FARAZ, ŞAHİN BAYRAM, MARCHETTI BARBARA, POLONARA Fabio, CORVARO Francesco, MARİELLA Mariella, Yayın Yeri:Heat Transfer Research ,2021, , 2021

NUMERICAL AND EXPERIMENTAL ANALYSIS OF LONGITUDINAL TUBULAR SOLAR AIR HEATERS MADE FROM PLASTIC AND METAL WASTE MATERIALS , KHANLARI ATAOLLAH, SÖZEN ADNAN, TUNCER AZİM DOĞUŞ, AFŞAR FARAZ, GÜRBÜZ EMİNE YAĞIZ, BİLGE Yaşarcan, Yayın Yeri:Heat Transfer Research ,2021, , 2021

Numerical analysis of elasto-plastic adhesively single step lap joints with cohesive zone models and its experimental verification , BAYRAMOGLU SİMAY,AKPINAR SALİH,ÇALIK AHMET, Yayın Yeri:Journal of Mechanical Science and Technology ,2021, , 2021

Microstructure and wear characterization of Al2O3 reinforced silver coated copper matrix composites by electroless plating and hot pressing methods , GÜLER ONUR, VAROL TEMEL, ALVER ÜMİT, KAYA GÜRKAN, YILDIZ FATİH, Yayın Yeri:Materials Today Communications ,2021, , 2021

MECHANICAL PERFORMANCE OF CARBON - ARAMID FIBER-REINFORCED LAMINATED COMPOSITES UNDER IMPACT AND SHEAR LOADING , Atmaca Beyza Nur, Oruç Ramazan, Aşcı Görkem, Yiğit Kadir, Yüzer Serkan, POLAT YUSUF, EKİCİ BÜLENT, Yayın Yeri:Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering ,2021, , 2021

Mechanical and dynamic mechanical thermal properties of ensete fiber/woven glass fiber fabric hybrid composites , Negowa Tolera,POLAT YUSUF,AKGÜL YASİN,KILIÇ ALİ,Jawaid Mohammad, Yayın Yeri:Composite Structures ,2021, , 2021

Laser Additive Manufacturing of Fe-Based Magnetic Amorphous Alloys , ÖZDEN MERVE GİZEM, Yayın Yeri:Magnetochemistry ,2021, , 2021

Koyun Ön Çapraz Bağının Hiperelastik Malzeme Özelliklerinin In-Vitro ve 3 Boyutlu Sonlu Elemanlar Analizi ile Değerlendirilmesi , KORKMAZ İSMAİL HAKKI, Yayın Yeri:Journal of the Institute of Science and Technology ,2021, , 2021

Investigation of the Effect of Heat Treatments at Different Temperatures on the Crystal Structure of Titanium-Nickel Films , ÇİÇEK HİKMET, Ozan Can AKAR, EFEOĞLU İHSAN, Yayın Yeri:Journal of the Institute of Science and Technology ,2021, , 2021

Influences of Ti, Al and V metal doping on the structural, mechanical and tribological properties of DLC films , YETİM ALİ FATİH, KOVACI HALİM, KASAPOĞLU AHMET EMRE, BOZKURT YUSUF BURAK, ÇELİK AYHAN, Yayın Yeri:Diamond and Related Materials ,2021, , 2021

Improvements in the static/dynamic strength of porcelain fused to metal dental crowns with surface protrusions produced by selective laser melting , Taftalı Merve, TURALIOĞLU KEREM, YETİM ALİ FATİH, UZUN YAKUP, AKPINAR SALİH, YILDIZ FATİH, Yayın Yeri:Journal of Manufacturing Processes ,2021, , 2021

Improved structural, mechanical, corrosion and tribocorrosion properties of Ti45Nb alloys by TiN, TiAlN monolayers, and TiAlN/TiN multilayer ceramic films , ÇOMAKLI ONUR, Yayın Yeri:CERAMICS INTERNATIONAL ,2021, , 2021

Heat transfer enhancement of finned shell and tube heat exchanger using Fe2O3/water nanofluid , AFŞAR FARAZ, SÖZEN ADNAN, KHANLARI ATAOLLAH, TUNCER AZİM DOĞUŞ, Yayın Yeri:Journal of Central South University ,2021, , 2021

Farklı İmalat Yöntemleri İle Elde Edilen Mikrokanalların Metrolojik Karakterizasyonu , ATEŞ İBRAHİM, MANAY EYÜPHAN, ŞAHİN BAYRAM, Yayın Yeri:Journal of the Institute of Science and Technology ,2021, , 2021

Farkli golgeleme durumlarinin fotovoltaik panel karakteristigi uzerine etkisi , AKYÜREK EDA FEYZA, GELİŞ KADİR, YOLADI MEHMET, Yayın Yeri:Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi ,2021, , 2021

Factorial Desing for Convective Heat Transfer Enhancement of Hybrid Nanofluids Based on Al2O3-TiO2 in a Double Pipe Mini Heat Exchanger , GELİŞ KADİR, AKYÜREK EDA FEYZA, Yayın Yeri:Heat Transfer Research ,2021, , 2021

Experimental investigation of effect of refrigerant gases, compressor lubricant and operating conditions on performance of a heat pump , AFŞAR FARAZ, SÖZEN ADNAN, KHANLARI ATAOLLAH, TUNCER AZİM DOĞUŞ, Hafiz Muhammad Ali, Yayın Yeri:Journal of Central South University ,2021, , 2021

Experimental and Numerical Investigation of Mechanical Properties of Different Lattice Structures Manufactured from Medical Titanium Alloy by Using Laser Beam-Powder Bed Fusion , HACISALİHOĞLU İLYAS, YILDIZ FATİH, ÇELİK AYHAN, Yayın Yeri:Journal of Materials Engineering and Performance ,2021, , 2021

Experimental and numerical analysis of a compact indirect solar dehumidification system , AFŞAR FARAZ, TUNCER AZİM DOĞUŞ, SÖZEN ADNAN, ÇİFTÇİ ERDEM, KHANLARI ATAOLLAH, Yayın Yeri:Solar Energy ,2021, , 2021

Entropy generation of different panel radiator types: Design of experiments using response surface methodology (RSM) , GELİŞ KADİR, AKYÜREK EDA FEYZA, Yayın Yeri:Journal of Building Engineering ,2021, , 2021

Energy-exergy and sustainability analysis of a PV-driven quadruple-flow solar drying system , KHANLARI ATAOLLAH, SÖZEN ADNAN, AFŞAR FARAZ, TUNCER AZİM DOĞUŞ, Yayın Yeri:Renewable Energy ,2021, , 2021

Energy And Fuel Cost Analysis For Four Different Degree-Day Regions in Turkey , GELİŞ KADİR, AKYÜREK EDA FEYZA, Yayın Yeri:Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi ,2021, , 2021

Effect of solution blown nanofibers on Mode-I fracture toughness and dynamic mechanical properties of carbon fiber-reinforced composites , POLAT YUSUF, EKİCİ BÜLENT, KILIÇ ALİ, Yayın Yeri:Polymer Composites ,2021, , 2021

Effect of Different Design of Abutment and Implant on Stress Distribution in 2 Implants and Peripheral Bone: A Finite Element Analysis Study , KUL ESRA,KORKMAZ İSMAİL HAKKI, Yayın Yeri:The Journal of Prosthetic Dentistry ,2021, , 2021

Effect of compatibilizer and fiber loading on ensete fiber-reinforced HDPE green composites: Physical, mechanical, and morphological properties , Negowa Tolera, POLAT YUSUF, KILIÇ ALİ, Yayın Yeri:Composites Science and Technology ,2021, , 2021

Dört Noktalı Eğme Testi Altında Yapıştırıcı ile Birleştirilmiş Bindirme Bağlantısının Deneysel ve Sonlu Elemanlar Analizi , AKPINAR SALİH, ÇALIK AHMET, Yayın Yeri:Çukurova Üniversitesi Mühendislik Fakültesi Dergisi ,2021, , 2021

Determining the tribological behavior of 316L stainless steel with lubricating micro-channels produced by the selective laser melting (SLM) method , TURALIOĞLU KEREM, Taftalı Merve, YETİM ALİ FATİH, Yayın Yeri:Industrial Lubrication and Tribology ,2021, , 2021

Dehumidification of sewage sludge using quonset solar tunnel dryer: An experimental and numerical approach , AFŞAR FARAZ, KHANLARI ATAOLLAH, TUNCER AZİM DOĞUŞ, SÖZEN ADNAN, Şahinkesen İstemihan, DI NICOLA Giovanni, Yayın Yeri:Renewable Energy ,2021, , 2021

Corrosion Properties of Ceramic-Based TiO2 Films on Plasma Oxidized Ti6Al4V/316L Layered Implant Structured Manufactured by Selective Laser Melting , TEKDİR HİLMİ, YETİM TUBA, YETİM ALİ FATİH, Yayın Yeri:Journal of Bionic Engineering ,2021, , 2021

Corrosion and tribocorrosion properties of duplex surface treatments consisting of plasma nitriding and DLC coating , KOVACI HALİM, BOZKURT YUSUF BURAK, YETİM ALİ FATİH, BARAN ACIMERT ÖZLEM, ÇELİK AYHAN, Yayın Yeri:Tribology International ,2021, , 2021

Biomechanical evaluation of a novel mandibular distraction osteogenesis protocol: an in-vitro validation and the practical use of the method , ŞENSOY ABDULLAH TAHİR, KAYMAZ İRFAN, ERTAŞ ÜMİT, Yayın Yeri:Computer Methods in Biomechanics and Biomedical Engineering ,2021, , 2021

An investigation of the fatigue performance of adhesively bonded step-lap joints: An experimental and numerical analysis , GAVGALI ESMA,Şahin Resul,AKPINAR SALİH, Yayın Yeri:International Journal of Adhesion and Adhesives ,2021, , 2021

An experimental study on optimization of $${\\mathbf{SiO}}_{2}$$/water nanofluid flows in circular minichannels , SUBAŞI ABDUSSAMET, MANAY EYÜPHAN, Elbaş Şeyma, ŞAHİN BAYRAM, Yayın Yeri:Journal of Thermal Analysis and Calorimetry ,2021, , 2021

An experimental investigation on melting and solidification behavior of phase change material in cylindrical latent heat storage units with minichannel , YOLADI MEHMET, AKYÜREK EDA FEYZA, Yayın Yeri:JOURNAL OF ENERGY STORAGE ,2021, , 2021

An application of finite element method in material selection for dental implant crowns , ŞENSOY ABDULLAH TAHİR, ÇOLAK MURAT, KAYMAZ İRFAN, FINDIK FEHİM, Yayın Yeri:Biomedizinische Technik ,2021, , 2021

Additive manufacturing of multiple layered materials (Ti6Al4V/316L) and improving their tribological properties with glow discharge surface modification , TEKDİR HİLMİ, YETİM ALİ FATİH, Yayın Yeri:VACUUM ,2021, , 2021

A New Porous Fixation Plate Design Using the Topology Optimization , MURAT FAHRİ, KAYMAZ İRFAN, KORKMAZ İSMAİL HAKKI, Yayın Yeri:Medical Engineering & Physics ,2021, , 2021

Wear behavior of Ni-B coated-hard anodized Al7Si alloy and machining performance with ZrN ceramic film coated carbide tool , IŞILDAK YUNUS EREN, ERGÜDER Tevfik Oğuzhan, KAYA GÜRKAN, HACISALİHOĞLU İLYAS, YAY Bora, YILDIZ FATİH, Yayın Yeri:SURFACES AND INTERFACES ,2020, , 2020

THE STRESS ANALYSIS ON TWO DIFFERENT ADHESIVELY BONDED T-JOINTS VIA 3D NONLINEAR FINITE ELEMENT METHOD , ÇELEBİ KAVDIR ELANUR,AYDIN MURAT DEMİR, Yayın Yeri:Journal of Thermal Engineering ,2020, , 2020

The fracture load analysis of different support patches in adhesively bonded single-lap joints , DEMİR KÜBRA,BAYRAMOĞLU SİMAY,AKPINAR SALİH, Yayın Yeri:THEORETICAL AND APPLIED FRACTURE MECHANICS ,2020, , 2020

The experimental and numerical study on the mechanical behaviours of adhesively bonded joints , ÇELEBİ KAVDIR ELANUR,AYDIN MURAT DEMİR, Yayın Yeri:Composites Part B: Engineering ,2020, , 2020

The experimental and numerical analysis of the adhesively bonded three-step-lap joints with different step lengths , DURMUŞ MELEK,AKPINAR SALİH, Yayın Yeri:THEORETICAL AND APPLIED FRACTURE MECHANICS ,2020, , 2020

The effects of boriding on metal-ceramic bond strength of Co–Cr alloy fabricated by selective laser melting , UZUN YAKUP, YANIKOĞLU NURAN, KOVACI HALİM, YETİM ALİ FATİH, ÇELİK AYHAN, Yayın Yeri:Journal of Adhesion Science and Technology ,2020, , 2020

The effects of boriding on metal-ceramic bond strength of Co\u2013Cr alloy fabricated by selective laser melting , UZUN YAKUP, YANIKOĞLU NURAN, KOVACI HALİM, YETİM ALİ FATİH, ÇELİK AYHAN, Yayın Yeri:Journal of Adhesion Science and Technology ,2020, , 2020

The effect of wear mechanısm for plasma oxidized Cp-Ti and its alloys on tribocorrosion performance , SEÇER YEŞİM,BOZKURT YUSUF BURAK,KOVACI HALİM,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Selçuk-Teknik Dergisi ,2020, , 2020

Testing of a novel convex-type solar absorber drying chamber in dehumidification process of municipal sewage sludge , TUNCER AZİM DOĞUŞ, SÖZEN ADNAN, AFŞAR FARAZ, KHANLARI ATAOLLAH, CEYLİN Şirin, GÜNGÖR AFŞİN, Yayın Yeri:Journal of Cleaner Production ,2020, , 2020

Structure and performance of electroblown PVDF-based nanofibrous electret filters , Al Rai Adel,Stojanovska Elena,Fidan Gizem,Yetgin Eda,POLAT YUSUF,KILIÇ ALİ,DEMİR ALİ,YILMAZ ŞAFAK, Yayın Yeri:POLYMER ENGINEERING AND SCIENCE ,2020, , 2020

Solution blow spinning (SBS) and SBS-spun nanofibers: Materials, methods, and applications , Dadol Glebert C,KILIÇ ALİ,Tijing Leonard D,Lim Kramer Joseph A,Cabatingan Luis K,Tan Noel Peter B,Stojanovska Elena,POLAT YUSUF, Yayın Yeri:Materials Today Communications ,2020, , 2020

Self-assembled fibrillar polyethylene crystals with tunable properties , Seyhan Aybeniz,Gunaydin Beyza Nur,POLAT YUSUF,KILIÇ ALİ,DEMİR ALİ,AVCI HÜSEYİN, Yayın Yeri:POLYMER ENGINEERING AND SCIENCE ,2020, , 2020

Panel Konumu ve Acisinin Fotovoltaik Panel Karakteristigi Uzerine Etkisi , GELİŞ KADİR,AKYÜREK EDA FEYZA,YOLADI MEHMET, Yayın Yeri:Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi ,2020, , 2020

Optimization of Variables Influencing the Thermal Conductivity and Fracture Strength of Reinforced PMMA by Using the Taguchi Method , KUL ESRA,YEŞİLDAL FARUK,MANDEV EMRE,ÇELİK CAFER, Yayın Yeri:Materiale Plastice ,2020, , 2020

Investigation of internal step and metal part reinforcement on joint strength in the adhesively bonded joint: Experimental and numerical analysis , BAYRAMOĞLU SİMAY,DEMİR KÜBRA,AKPINAR SALİH, Yayın Yeri:THEORETICAL AND APPLIED FRACTURE MECHANICS ,2020, , 2020

Investigating the Optimum Model Parameters for Casting Process of A356 Alloy: A Cross-validation Using Response Surface Method and Particle Swarm Optimization , ŞENSOY ABDULLAH TAHİR,ÇOLAK MURAT,KAYMAZ İRFAN,DIŞPINAR DERYA, Yayın Yeri:ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING ,2020, , 2020

Influence of CrN, TiAlN monolayers and TiAlN/CrN multilayer ceramic films on structural, mechanical and tribological behavior of β-type Ti45Nb alloys , ÇOMAKLI ONUR, Yayın Yeri:CERAMICS INTERNATIONAL ,2020, , 2020

Improving structural, tribological and electrochemical properties of Ti6Al4V alloy with B-doped TiO2 thin films , ÇELİK AYHAN,ACAR MUHAMMET TAHA,YETİM TUBA,KOVACI HALİM,YETİM ALİ FATİH, Yayın Yeri:TRIBOLOGY INTERNATIONAL ,2020, , 2020

Farkli Tip Isi Degistiriciler Icin Termodinamik Analiz , AKYÜREK EDA FEYZA,GELİŞ KADİR,YOLADI MEHMET, Yayın Yeri:Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi ,2020, , 2020

Farklı Tip Isı Değiştiriciler için Termodinamik Analiz , AKYÜREK EDA FEYZA, GELİŞ KADİR, YOLADI MEHMET, Yayın Yeri:Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi ,2020, , 2020

Experimental Study for Comparing Heating and Cooling Performance of Thermoelectric Peltier , AFŞAR FARAZ, Yayın Yeri:Politeknik Dergisi ,2020, , 2020

EXPERIMENTAL OPTIMIZATION AND INVESTIGATION OF COMPRESSOR COOLING FAN IN AN AIR-TO-WATER HEAT PUMP , AFŞAR FARAZ, ŞAHİN BAYRAM, KHANLARI ATAOLLAH, MANAY EYÜPHAN, Yayın Yeri:Heat Transfer Research ,2020, , 2020

Experimental Optimization and Investigation of Compressor Cooling Fan In Air to Water Heat Pump , AFSHARI FARAZ,ŞAHİN BAYRAM,KHANLARI ATAOLLAH,MANAY EYÜPHAN, Yayın Yeri:Heat Transfer Research ,2020, , 2020

Experimental investigation on using building shower drain water as a heat source for heat pump systems , KHANLARI ATAOLLAH, SÖZEN ADNAN, ŞAHİN BAYRAM, DI NICOLA Giovanni, AFŞAR FARAZ, Yayın Yeri:Energy Sources, Part A: Recovery, Utilization and Environmental Effects ,2020, , 2020

EXPERIMENTAL AND NUMERICAL STUDY ON HEAT TRANSFER ENHANCEMENT OF HOME RADIATORS BY EMPLOYING SOLAR CELLS AND FANS , AFŞAR FARAZ, Yayın Yeri:Heat Transfer Research ,2020, , 2020

Experimental and numerical investigation on thermoelectric coolers for comparing air-to-water to air-to-air refrigerators , AFŞAR FARAZ, Yayın Yeri:Journal of Thermal Analysis and Calorimetry ,2020, , 2020

Experimental and CFD survey of indirect solar dryer modified with low-cost iron mesh , GÜLER DAL HANDE ÖZGE, SÖZEN ADNAN, TUNCER AZİM DOĞUŞ, AFŞAR FARAZ, KHANLARI ATAOLLAH, CEYLİN Şirin, GÜNGÖR AFŞİN, Yayın Yeri:Solar Energy ,2020, , 2020

Experimental Analysis and Evaluation of Thermostat Effects on Engine Cooling System , Ghasemi Hadi, KALELİ ALİRIZA, SOLMAZ İSMAİL, AFŞAR FARAZ, Yayın Yeri:Journal of Thermal Science ,2020, , 2020

Empirical Investigation of Small-Scale Aluminium Wool Packed Solar Air Heater Made with Waste Material , SÖZEN ADNAN, KHANLARI ATAOLLAH, TUNCER AZİM DOĞUŞ, CEYLİN Şirin, AFŞAR FARAZ, GÜNGÖR AFŞİN, Yayın Yeri:Politeknik Dergisi ,2020, , 2020

Electrically conductive concrete: A laboratory-based investigation and numerical analysis approach , DEHGHANPOUR Heydar, YILMAZ KEMALETTİN, AFŞAR FARAZ, İPEK METİN, Yayın Yeri:Construction and Building Materials ,2020, , 2020

Effect of turbulator modifications on the thermal performance of cost-effective alternative solar air heater , AFŞAR FARAZ, SÖZEN ADNAN, KHANLARI ATAOLLAH, TUNCER AZİM DOĞUŞ, CEYLİN Şirin, Yayın Yeri:Renewable Energy ,2020, , 2020

Effect of Oxidation Time on Wear Behaviour of Thermally Oxidized CoCrMo Alloy , ÇOMAKLI ONUR, Yayın Yeri:Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi ,2020, , 2020

Effect of air pressure on nanofiber production in solution blowing method , POLAT YUSUF,YANGAZ MURAT UMUT,Calisir Mehmet Durmus,Gul Mehmet Zafer,DEMİR ALİ,Ekici Bulent,KILIÇ ALİ, Yayın Yeri:JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY ,2020, , 2020

Drying municipal sewage sludge with v-groove triple-pass and quadruple-pass solar air heaters along with testing of a solar absorber drying chamber , KHANLARI ATAOLLAH, SÖZEN ADNAN, AFŞAR FARAZ, CEYLİN Şirin, TUNCER AZİM DOĞUŞ, GÜNGÖR AFŞİN, Yayın Yeri:Science of the Total Environment ,2020, , 2020

Dizel ve Biyodizel Yakıtlı Bir Motorda Yakıt Sıcaklığının Motor Performansı ve Egzoz Emisyonlarına Etkisinin İncelenmesi , GÜNER ERDOĞAN,CEVİZ MEHMET AKİF, Yayın Yeri:Bayburt Üniversitesi Fen Bilimleri Dergisi ,2020, , 2020

Development of particle swarm and topology optimization-based modeling for mandibular distractor plates , ŞENSOY ABDULLAH TAHİR,KAYMAZ İRFAN,ERTAŞ ÜMİT, Yayın Yeri:Swarm and Evolutionary Computation ,2020, , 2020

Tribological and electrochemical behavior of Ag2O/ZnO/NiO nanocomposite coating on commercial pure titanium for biomedical applications , ÇOMAKLI ONUR,YAZICI MUSTAFA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Industrial Lubrication and Tribology ,2019, , 2019

The investigation of mechanical properties of a structural adhesive via digital image correlation (DIC) technic , ÇELEBİ KAVDIR ELANUR,AYDIN MURAT DEMİR, Yayın Yeri:Composites Part B: Engineering ,2019, , 2019

The Experimental Investigation of The Viscosity of The Al2O3 Nanofluid , AKYÜREK EDA FEYZA, GELİŞ KADİR, ŞAHİN BAYRAM, Yayın Yeri:Eastern Anatolian Journal of Science ,2019, , 2019

The effect of surface plastic deformation produced by shot peening on corrosion behavior of a low-alloy steel , KOVACI HALİM,BOZKURT YUSUF BURAK,YETİM ALİ FATİH,ASLAN MEVRA,ÇELİK AYHAN, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2019, , 2019

The Effect of Adherend Thickness and Width on Fracture Behavior in Adhesively bonded Double Cantilever Beam Joints , AKPINAR SALİH, Yayın Yeri:European Mechanical Science ,2019, , 2019

Structural and tribological characterization of amorphous and crystalline titanium-nickel coatings , ÇİÇEK HİKMET, Yayın Yeri:JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY ,2019, , 2019

Solution blown polymer/biowaste derived carbon particles nanofibers: An optimization study and energy storage applications , Stojanovska Elena,Öztürk Nur Dilara,POLAT YUSUF,AKBULUT HATEM,KILIÇ ALİ, Yayın Yeri:Journal of Energy Storage ,2019, , 2019

Optimum Vida Konfigürasyonu Probleminin Adaptif Parçacık Sürü Yöntemi ile Çözümü için MATLAB-PYTHON-ANSYS Döngüsünün Geliştirilmesi , ŞENSOY ABDULLAH TAHİR,KAYMAZ İRFAN, Yayın Yeri:FİGES İLERİ MÜHENDİSLİK VE ARGE TEKNOLOJİLERİ DERGİSİ ,2019, , 2019

Optimization of waste gate in the diesel engines with turbocharger , BİLEN KADİR,CEVİZ MEHMET AKİF, Yayın Yeri:International Journal of Automotive Engineering ,2019, , 2019

Optimization of Turbocharged Diesel Engines , BİLEN KADİR,CEVİZ MEHMET AKİF, Yayın Yeri:International Journal of Mechanical and Mechatronics Engineering ,2019, , 2019

Optimization of design parameters for heat transfer and friction factor in a heat sink with hollow trapezoidal baffles , ŞAHİN BAYRAM,ATEŞ İBRAHİM,MANAY EYÜPHAN,BAYRAKÇEKEN ABDULKADİR,ÇELİK CAFER, Yayın Yeri:APPLIED THERMAL ENGINEERING ,2019, , 2019

Optimal Material Selection for Total Hip Implant: A Finite Element Case Study , ŞENSOY ABDULLAH TAHİR,ÇOLAK MURAT,KAYMAZ İRFAN,FINDIK FEHİM, Yayın Yeri:ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING ,2019, , 2019

Mikrokanallı ısı alıcıda SiO2-su nanoakışkanının karma taşınım özelliklerinin deneysel olarak incelenmesi , ŞAHİN BAYRAM,ÖZER RAHİM AYTUĞ,ATEŞ İBRAHİM,MANAY EYÜPHAN, Yayın Yeri:DÜMF Mühendislik Dergisi ,2019, , 2019

Mechanical, morphological, structural and dynamic mechanical properties of alkali treated Ensete stem fibers reinforced unsaturated polyester composites , Negowa Tolera,POLAT YUSUF,Büyüknalçacı Feyza,KILIÇ ALİ,Saba Naheed,Mohammed Jawaid, Yayın Yeri:Composite Structures ,2019, , 2019

Investigation of Heat Transfer and Pressure Drop Characteristics of SiO2 Nanofluids in a Circular Microchannel , ŞAHİN BAYRAM,Bayramian Hourieh,MANDEV EMRE,MANAY EYÜPHAN, Yayın Yeri:Journal of the Institute of Science and Technology ,2019, , 2019

Investigating environmental effects of different combi boilers using LPG , VARİYENLİ HALİL İBRAHİM, AFŞAR FARAZ, KHANLARI ATAOLLAH, Yayın Yeri:El-Cezeri: Journal of Science and Engineering ,2019, , 2019

Experimental investigation of mixed convection heat transfer of nanofluids in a circular microchannel with different inclination angles , MANDEV EMRE,MANAY EYÜPHAN, Yayın Yeri:Journal of Thermal Analysis and Calorimetry ,2019, , 2019

Experimental investigation of mixed convection heat transfer of ferrite-based nanofluids in multiple microchannels , MANAY EYÜPHAN, Yayın Yeri:Heat and Mass Transfer ,2019, , 2019

Experimental and numerical determination of the thermal cycle performance of joints obtained with nanostructure-doped nanocomposite adhesives , AKPINAR SALİH,ÖZEL ADNAN, Yayın Yeri:Composites Part B: Engineering ,2019, , 2019

Eklemeli Üretim İle Elde Edilen Fonksiyonel Kademelendirilmiş Gözenekli İmplantlar , MURAT FAHRİ,KORKMAZ İSMAİL HAKKI,ŞENSOY ABDULLAH TAHİR,KAYMAZ İRFAN, Yayın Yeri:Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji ,2019, , 2019

Effects of shot peening pre-treatment and plasma nitriding parameters on the structural, mechanical and tribological properties of AISI 4140 low-alloy steel , KOVACI HALİM,HACISALİHOĞLU İLYAS,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2019, , 2019

Effect of nanostructured reinforcement of adhesive on thermal cycling performance of a single-lap joint with composite adherends , AKPINAR SALİH,Avinc Akpinar Iclal, Yayın Yeri:Composites Part B: Engineering ,2019, , 2019

Effect of gas mixture on tribological performance of plasma nitrided grey cast iron under dry and lubricated conditions , ÇOMAKLI ONUR,YETİM ALİ FATİH,Karaca Bahadır,ÇELİK AYHAN, Yayın Yeri:Materials Research Express ,2019, , 2019

Effect of Extensometer Usage on Obtaining the Force-Displacement Curve of the Adhesively Single Lap Joint , ÇALIK AHMET,AKPINAR SALİH, Yayın Yeri:European Mechanical Science ,2019, , 2019

Characterization of the Structural and Tribological Properties of Medical Ti6Al4V Alloy Produced in Different Production Parameters Using Selective Laser Melting , KAYA GÜRKAN,YILDIZ FATİH,HACISALİHOĞLU İLYAS, Yayın Yeri:3D Printing and Additive Manufacturing ,2019, , 2019

Centrifugally spun silica (SiO2) nanofibers for high-temperature air filtration , Tepekıran Beyza Nur,ÇALIŞIR MEHMET DURMUŞ,POLAT YUSUF,AKGÜL YASİN,KILIÇ ALİ, Yayın Yeri:AEROSOL SCIENCE AND TECHNOLOGY ,2019, , 2019

Biomechanical analysis of spinal implants with different rod diameters under static and fatigue loads: an experimental study , KOVACI HALİM,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Biomedical Engineering-Biomedizinische Technik ,2019, , 2019

Analysis of mixed convection heat transfer of nanofluids in a minichannel for aiding and opposing flow conditions , MANAY EYÜPHAN,MANDEV EMRE,TEMİZ RESUL ÖNDER, Yayın Yeri:Heat and Mass Transfer ,2019, , 2019

Wear behaviors of TiN/TiCN/DLC composite coatings in different environments , ÇİÇEK HİKMET, Yayın Yeri:CERAMICS INTERNATIONAL ,2018, , 2018

Tribological Behaviour of Ti:Ta-DLC Films Under Different Tribo-Test Conditions , EFEOĞLU İHSAN,KELEŞ AYŞENUR,TOTİK YAŞAR,ÇİÇEK HİKMET,ŞÜKÜROĞLU EBRU EMİNE, Yayın Yeri:IOP Conference Series: Materials Science and Engineering ,2018, , 2018

Tribological behavior of DLC films and duplex ceramic coatings under different sliding conditions , KOVACI HALİM,YETİM ALİ FATİH,BARAN ÖZLEM,ÇELİK AYHAN, Yayın Yeri:Ceramics International ,2018, , 2018

Tribological and electrochemical properties of TiO2 films produced on Cp-Ti by sol-gel and SILAR in bio-simulated environment , ÇOMAKLI ONUR,YAZICI MUSTAFA,KOVACI HALİM,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2018, , 2018

Tribocorrosion behavior of plasma nitrided Hardox steels in NaCl solution , HACISALİHOĞLU İLYAS,YILDIZ FATİH,ÇELİK AYHAN, Yayın Yeri:TRIBOLOGY INTERNATIONAL ,2018, , 2018

Thermodynamic analysis of a system converted from heat pump to refrigeration device , AFŞAR FARAZ, KARAGÖZ ŞENDOĞAN, ÇOMAKLI ÖMER, Ghasemi Hadi, Yayın Yeri:Heat and Mass Transfer ,2018, , 2018

The wear performance of carbide tools coated with TiAlSiN, AlCrN and TiAlN ceramic films in intelligent machining process , DURMAZ Yusuf Murat,YILDIZ FATİH, Yayın Yeri:CERAMICS INTERNATIONAL ,2018, , 2018

The synthesis of super-hydrophilic and hard MgB2 coatings as an alternative to electroless nickel coatings , BÜLBÜL FERHAT,GÜNEY MERVE, Yayın Yeri:KOVOVE MATERIALY-METALLIC MATERIALS ,2018, , 2018

The friction and wear performance of DLC coatings deposited on plasma nitrided AISI 4140 steel by magnetron sputtering under air and vacuum conditions , KOVACI HALİM,BARAN ÖZLEM,YETİM ALİ FATİH,BOZKURT YUSUF BURAK,KARA LEVENT,ÇELİK AYHAN, Yayın Yeri:Surface and Coatings Technology ,2018, , 2018

The fracture behaviour of nanostructure added adhesives under ambient temperature and thermal cyclic conditions , KANAR BELİN,AKPINAR SALİH,Avinc Akpinar Iclal,AKBULUT HAMİT,ÖZEL ADNAN, Yayın Yeri:Theoretical and Applied Fracture Mechanics ,2018, , 2018

The Effect of Plasma Oxidation and Nitridation on Corrosion Behavior of CoCrMo Alloy in SBF Solution , ASLAN MEVRA, ÇOMAKLI ONUR, YAZICI MUSTAFA, YETİM ALİ FATİH, BAYRAK ÖZGÜ, ÇELİK AYHAN, Yayın Yeri:Surface Review and Letters ,2018, , 2018

Structural, mechanical and tribological properties of Ti and TiN coatings on 316L stainless steel , YAZICI MUSTAFA,KOVACI HALİM,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Ceramics International ,2018, , 2018

On numerical methods; optimization of CFD solution to evaluate fluid flow around a sample object at low Re numbers , AFŞAR FARAZ, Ghasemi Hadi, ŞAHİN BAYRAM, Grifoni Roberta Cocci, CORVARO Francesco, MARCHETTI BARBARA, POLONARA Fabio, Yayın Yeri:Mathematics and Computers in Simulation ,2018, , 2018

Numerical analysis of ball-type turbulators in tube heat exchangers with computational fluid dynamic simulations , AFŞAR FARAZ, Ghasemi Hadi, DI NICOLA Giovanni, Yayın Yeri:International Journal of Environmental Science and Technology ,2018, , 2018

Magnetron Sıçratma Yöntemi ile Büyütülen Elmas BenzeriKarbon Filmlerin Adezyon ve Çoklu-Çizik Test DavranışlarınınAraştırılması , ÇİÇEK HİKMET, Yayın Yeri:Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi ,2018, , 2018

Investigation of the usage possibility of CuO and CuS thin films produced by successive ionic layer adsorption and reaction (SILAR) as solid lubricant , KOVACI HALİM,AKALTUN YUNUS,YETİM ALİ FATİH,UZUN YAKUP,ÇELİK AYHAN, Yayın Yeri:Surface and Coatings Technology ,2018, , 2018

Investigation of mechanical and thermal properties of nanostructure-doped bulk nanocomposite adhesives , Avinc Akpinar Iclal,GÜRSES AHMET,AKPINAR SALİH,GÜLTEKİN KÜRŞAT,AKBULUT HAMİT,ÖZEL ADNAN, Yayın Yeri:The Journal of Adhesion ,2018, , 2018

Experimental analysis for heat transfer of nanofluid with wire coil turbulators in a concentric tube heat exchanger , AKYÜREK EDA FEYZA,GELİŞ KADİR,ŞAHİN BAYRAM,MANAY EYÜPHAN, Yayın Yeri:Results in Physics ,2018, , 2018

Entropy generation of nanofluid flow in a microchannel heat sink , MANAY EYÜPHAN,AKYÜREK EDA FEYZA,ŞAHİN BAYRAM, Yayın Yeri:Results in Physics ,2018, , 2018

Effect of Ti amount on wear and corrosion properties of Ti-doped Al 2 O 3 nanocomposite ceramic coated CP titanium implant material , ÇOMAKLI ONUR,YAZICI MUSTAFA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Ceramics International ,2018, , 2018

Effect of Nitrogen Amount on Tribological Behavior of Plasma Nitrided 31CrMoV9 Steel , ÇOMAKLI ONUR,YETİM ALİ FATİH,Karaca Bahadır,ÇELİK AYHAN, Yayın Yeri:SURFACE REVIEW AND LETTERS ,2018, , 2018

Effect of boronizing on the structural, mechanical and tribological properties of CoCrW dental alloy produced by selective laser melting , UZUN YAKUP,KOVACI HALİM,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Industrial Lubrication and Tribology ,2018, , 2018

Determining the Patient-Specific Optimum Osteotomy Line for Severe Mandibular Retrognathia Patients , ŞENSOY ABDULLAH TAHİR,KAYMAZ İRFAN,ERTAŞ ÜMİT,KİKİ ALİ, Yayın Yeri:Journal of Craniofacial Surgery ,2018, , 2018

Comparative engine characteristics of biodiesels from hazelnut, corn, soybean, canola and sunflower oils on DI diesel engine , EFE ŞÜKRAN, CEVİZ MEHMET AKİF, TEMÜR HAKAN, Yayın Yeri:Renewable Energy ,2018, , 2018

An experimental study on composite adhesives reinforced with different types of organo-clays , AVİNC AKPİNAR İCLAL,GÜLTEKİN KÜRŞAT,AKPINAR SALİH,GÜRSES AHMET,ÖZEL ADNAN, Yayın Yeri:The Journal of Adhesion ,2018, , 2018

Adhesion and multipass scratch characterization of Ti:Ta-DLC composite coatings , ÇİÇEK HİKMET,KELEŞ AYŞENUR,TOTİK YAŞAR,EFEOĞLU İHSAN, Yayın Yeri:DIAMOND AND RELATED MATERIALS ,2018, , 2018

A thermodynamic comparison between heat pump and refrigeration device using several refrigerants , AFŞAR FARAZ, ÇOMAKLI ÖMER, KARAGÖZ ŞENDOĞAN, Ghasemi Hadi, Yayın Yeri:Energy and Buildings ,2018, , 2018

Wear performance of different nitride-based coatings on plasma nitrided AISI M2 tool steel in dry and lubricated conditions , HACISALİHOĞLU İLYAS,YILDIZ FATİH,ALSARAN AKGÜN, Yayın Yeri:Wear ,2017, , 2017

Wear behavior of the plasma and thermal oxidized Ti-15Mo and Ti-6Al-4V alloys , HACISALİHOĞLU İLYAS,YILDIZ FATİH,ALSARAN AKGÜN,PÜRÇEK GENÇAĞA, Yayın Yeri:IOP Conference Series: Materials Science and Engineering ,2017, , 2017

Tribological properties of TiO2 SiO2 double layer coatings deposited on CP Ti , ÇOMAKLI ONUR,YAZICI MUSTAFA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Surface Review and Letters ,2017, , 2017

TRIBOLOGICAL PROPERTIES OF TiO/SiO DOUBLE LAYER COATINGS DEPOSITED ON CP-Ti , ÇOMAKLI ONUR,YAZICI MUSTAFA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Surface Review and Letters ,2017, , 2017

The mechanical and tribological properties of Ti [Nb, V] N films on the Al-2024 alloy , BARAN ÖZLEM,KELEŞ AYŞENUR,ÇİÇEK HİKMET,TOTİK YAŞAR,EFEOĞLU İHSAN, Yayın Yeri:Surface and Coatings Technology ,2017, , 2017

The Effects of Nanofilter and Nanoclay on Reducing Pollutant Emissions from Rapeseed Biodiesel in a Diesel Engine , AFSHARİ FARZAD, AFSHARİ Hamed, AFŞAR FARAZ, Ghasemi Hadi, Yayın Yeri:Waste and Biomass Valorization ,2017, , 2017

The Effects of Aging Time on the Structural and ElectrochemicalProperties of Composite Coatings on CP-Ti Substrate , ÇOMAKLI ONUR,YAZICI MUSTAFA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Journal of Bionic Engineering ,2017, , 2017

The Effects of Aging Time on the Structural and Electrochemical Properties of Composite Coatings on CP-Ti Substrate , ÇOMAKLI ONUR,YAZICI MUSTAFA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Journal of Bionic Engineering ,2017, , 2017

Research on strength of nanocomposite adhesively bonded composite joints , Avinc Akpinar Iclal,GÜLTEKİN KÜRŞAT,AKPINAR SALİH,AKBULUT HAMİT,ÖZEL ADNAN, Yayın Yeri:Composites Part B: Engineering ,2017, , 2017

Production of hard hydrophilic Ni-B coatings on hydrophobic Ni-Ti and Ti-6Al-4V alloys by electroless deposition , BÜLBÜL FERHAT,KARABUDAK FİLİZ,YEŞİLDAL RUHİ, Yayın Yeri:Materials Testing ,2017, , 2017

Optimization of heat transfer and efficiency of engine via air bubble injection inside engine cooling system , Ghasemi Hadi, KALELİ ALİRIZA, AFŞAR FARAZ, AMINI ALI, Yayın Yeri:Applied Thermal Engineering ,2017, , 2017

Influence of Refrigerant Properties and Charge Amount on Performance of Reciprocating Compressor in Air Source Heat Pump , AFŞAR FARAZ, ÇOMAKLI ÖMER, ADIGÜZEL NESRİN, Ghasemi Hadi, Yayın Yeri:Journal of Energy Engineering ,2017, , 2017

Influence of plasma nitriding treatment on the adhesion of DLC films deposited on AISI 4140 steel by PVD magnetron sputtering , KOVACI HALİM,BARAN ÖZLEM,BAYRAK ÖZGÜ,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Journal of Adhesion Science and Technology ,2017, , 2017

Flow Boiling Characteristics of Nanofluids in Microchannels , MANAY EYÜPHAN, Yayın Yeri:Journal of the Institute of Science and Technology ,2017, , 2017

Experimental and numerical investigation of the cylindrical blade tube inserts effect on the heat transfer enhancement in the horizontal pipe exchangers , KARAGÖZ ŞENDOĞAN, AFŞAR FARAZ, YILDIRIM ORHAN, ÇOMAKLI ÖMER, Yayın Yeri:Heat and Mass Transfer ,2017, , 2017

Experimental analysis on the single-lap joints bonded by a nanocomposite adhesives which obtained by adding nanostructures , AVİNÇ AKPINAR İCLAL,GÜLTEKİN KÜRŞAT,AKPINAR SALİH,AKBULUT HAMİT,ÖZEL ADNAN, Yayın Yeri:Composites Part B: Engineering ,2017, , 2017

Dry Sliding Wear Characteristics of Plasma-Nitrocarburized Co – Cr – Mo Alloy , BAYRAK ÖZGÜ,KOVACI HALİM,YILDIZ FATİH,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Metal Science and Heat Treatment ,2017, , 2017

Determining the critical loads of V and Nb doped ternary TiN-based coatings deposited using CFUBMS on steels , KELEŞ AYŞENUR,ÇİÇEK HİKMET,BARAN ÖZLEM,TOTİK YAŞAR,EFEOĞLU İHSAN, Yayın Yeri:Surface and Coatings Technology ,2017, , 2017

Comprehensive Analysis of the Volume of Bone for Grafting that can be Harvested from Iliac Crest Donor Sites , KILINÇ ADNAN,KORKMAZ İSMAİL HAKKI,KAYMAZ İRFAN,KILINÇ ZEKİYE,DAYI ERTUNÇ,KANTARCI ABDULMECİT, Yayın Yeri:British Journal of Oral and Maxillofacial Surgery ,2017, , 2017

Characterization of lubricating oil effects on the performance of reciprocating compressors in air–water heat pumps , AFŞAR FARAZ, ÇOMAKLI ÖMER, LESANİ ASGHAR, KARAGÖZ ŞENDOĞAN, Yayın Yeri:International Journal of Refrigeration ,2017, , 2017

An Investigation of Effect of Fuel Temperature on Engine Performanceand NO Emissions in a Spark Ignition Engine Running on LPG , ÖNER İLHAN VOLKAN,CEVİZ MEHMET AKİF,KALELİ ALİRIZA, Yayın Yeri:International Journal of Innovative Research and Reviews ,2017, , 2017

An Analysis of Mandibular Symphyseal Graft Sufficiencyfor Alveolar Cleft Bone Grafting , KILINÇ ADNAN,SARUHAN NESRİN,ERTAŞ ÜMİT,KORKMAZ İSMAİL HAKKI,KAYMAZ İRFAN, Yayın Yeri:Journal of Craniofacial Surgery ,2017, , 2017

An Analysis of Mandibular Symphyseal Graft Sufficiency for Alveolar Cleft Bone Grafting , KILINÇ ADNAN,SARUHAN NESRİN,ERTAŞ ÜMİT,KORKMAZ İSMAİL HAKKI,KAYMAZ İRFAN, Yayın Yeri:The Journal of Craniofacial Surgery ,2017, , 2017

A NOVEL METHOD FOR IMPROVING PLASMA NITRIDING EFFICIENCY: PRE-MAGNETIZATION BY DC MAGNETIC FIELD , KOVACI HALİM,YETİM ALİ FATİH,BOZKURT YUSUF BURAK,ÇELİK AYHAN, Yayın Yeri:Surface Review and Letters ,2017, , 2017

A novel method for improving plasma nitriding efficiency Pre magnetization by DC magnetic field , KOVACI HALİM,bozkurt yusuf burak,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Surface Review and Letters ,2017, , 2017

A comparative study of fatigue properties of TiVN and TiNbN thin films deposited on different substrates , ÇİÇEK HİKMET,BARAN ÖZLEM,KELEŞ AYŞENUR,TOTİK YAŞAR,EFEOĞLU İHSAN, Yayın Yeri:Surface and Coatings Technology ,2017, , 2017

Yanal yol tutuş kararlılığı için merkezi diferansiyel kontrolü tabanlı çekiş torku dağıtımı , ÖNDER ERAY TEOMAN,BAŞLAMIŞLI SELAHATTİN ÇAĞLAR, Yayın Yeri:Journal of the Faculty of Engineering and Architecture of Gazi University ,2016, , 2016

Ultrasonic coating of nanofibrous webs a feasible approach to photocatalytic water filters , ŞİMŞEK RAMAZAN,POLAT YUSUF,PAMPAL ESRA ŞERİFE,Ağma Onur,KILIÇ ALİ, Yayın Yeri:Journal of Coatings Technology and Research ,2016, , 2016

The preparation of hard and super hydrophilic MgB2 coating by spray pyrolysis deposition , BÜLBÜL FERHAT,JAFARPOUR SOMAIYEH,ERTUĞRUL MEHMET, Yayın Yeri:Materialwissenschaft und Werkstofftechnik ,2016, , 2016

The effects of graphene nanostructure reinforcement on the adhesive method and the graphene reinforcement ratio on the failure load in adhesively bonded joints , GÜLTEKİN KÜRŞAT,AKPINAR SALİH,GÜRSES AHMET,EROĞLU ZAFER,ÇAM SALİM,AKBULUT HAMİT,KESKİN ZEKİ,ÖZEL ADNAN, Yayın Yeri:Composites Part B: Engineering ,2016, , 2016

The effect of microchannel height on performance of nanofluids , MANAY EYÜPHAN,ŞAHİN BAYRAM, Yayın Yeri:International Journal of Heat and Mass Transfer ,2016, , 2016

The effect of calcination temperatures on structural and electrochemical properties of TiO2 film deposited on commercial pure titanium , ÇOMAKLI ONUR,YAZICI MUSTAFA,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Surface and Coatings Technology ,2016, , 2016

Synergistic effect of bias and target currents for magnetron sputtered MoS2 Ti composite films , BÜLBÜL FERHAT,EFEOĞLU İHSAN, Yayın Yeri:Material Testing ,2016, , 2016

Solution blowing of thermoplastic polyurethane nanofibers A facile method to produce flexible porous materials , POLAT YUSUF,PAMPAL ESRA ŞERİFE,Elena Stojanovska,ŞİMŞEK RAMAZAN,Ahmed Hassanin,KILIÇ ALİ,DEMİR ALİ,YILMAZ ŞAFAK, Yayın Yeri:Journal of Applied Polymer Science ,2016, , 2016

Optimal Charge Amount for Different Refrigerants in Air-to-Water Heat Pumps , AFŞAR FARAZ, ÇOMAKLI ÖMER, ADIGÜZEL NESRİN, KARAGÖZ ŞENDOĞAN, Yayın Yeri:Journal of Science and Technology - Transactions of Mechanical Engineering ,2016, , 2016

Multi objective optimization of a honeycomb heat sink using Response Surface Method , SUBAŞI ABDUSSAMET,ŞAHİN BAYRAM,KAYMAZ İRFAN, Yayın Yeri:International Journal of Heat and Mass Transfer ,2016, , 2016

Investigation of structural and tribological properties of electroless Ni B coated pure titanium , ÇELİK İLHAN,KARAKAN MEHMET,BÜLBÜL FERHAT, Yayın Yeri:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology ,2016, , 2016

Heat Transfer and Pressure Drop of Nanofluids in a Microchannel Heat Sink , MANAY EYÜPHAN,ŞAHİN BAYRAM, Yayın Yeri:Heat Transfer Engineering ,2016, , 2016

Fatigue crack growth behavior of DLC coated AISI 4140 steel under constant and variable amplitude loading conditions , KOVACI HALİM,YETİM ALİ FATİH,BARAN ÖZLEM,ÇELİK AYHAN, Yayın Yeri:Surface and Coatings Technology ,2016, , 2016

Fatigue crack growth analysis of plasma nitrided AISI 4140 low alloy steel Part 2 Variable amplitude loading and load interactions , KOVACI HALİM,YETİM ALİ FATİH,BARAN ÖZLEM,ÇELİK AYHAN, Yayın Yeri:MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING ,2016, , 2016

Fatigue crack growth analysis of plasma nitrided AISI 4140 low alloy steel Part 1 constant amplitude loading , KOVACI HALİM,YETİM ALİ FATİH,BARAN ÖZLEM,ÇELİK AYHAN, Yayın Yeri:MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING ,2016, , 2016

Fatigue and adhesion properties of martensite and austenite phases of TiNi shape memory thin films deposited by magnetron sputtering , ÇİÇEK HİKMET,EFEOĞLU İHSAN, Yayın Yeri:Surface and Coatings Technology ,2016, , 2016

Fabrication of antibacterial and hydrophilic electroless Ni B coating on 316L stainless steel , BÜLBÜL FERHAT,bülbül leman elif, Yayın Yeri:Applied Physics A ,2016, , 2016

EFFECTS OF USING PHASE CHANGE MATERIALS ON THE COLD START EXHAUST EMİSSİONS CHARACTERİSTİCS OF DIESEL ENGINES , KAYA FERHAT,CEVİZ MEHMET AKİF,KALELİ ALİRIZA,GÜLLÜCE HÜSEYİN,ÖZAKIN AHMET NUMAN, Yayın Yeri:Mugla Journal of Science and Technology ,2016, , 2016

Effects of unbalance on the adhesively bonded composites-aluminium joints , GÜLTEKİN KÜRŞAT,AKPINAR SALİH,ÖZEL ADNAN,ÖNER GÜLŞAH, Yayın Yeri:The Journal of Adhesion ,2016, , 2016

Effect of sol aging time on the wear properties of TiO2 SiO2 composite films prepared by a sol gel method , YAZICI MUSTAFA,ÇOMAKLI ONUR,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Tribology International ,2016, , 2016

Determination of Thermophysical Properties of Water Based Magnetic Nanofluids , MANAY EYÜPHAN,ŞAHİN BAYRAM,MANDEV EMRE,ATEŞ İBRAHİM,YETİM TUBA, Yayın Yeri:International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering ,2016, , 2016

Comparison of the biomechanics of plates with modified surface texture in an in vitro chicken model , KUYUBAŞI SABİT NUMAN,Gülman Birol,SAY FERHAT,ÇIRAKLI ALPER,YILDIZ FATİH, Yayın Yeri:Ege Journal of Medicine ,2016, , 2016

Analysis of windbreaker combinations on steam power plant natural draft dry cooling towers , CEVİZ MEHMET AKİF, Yayın Yeri:APPLIED THERMAL ENGINEERING ,2016, , 2016

ALÜMİNYUM OKSİT VE TİTANYUM DİOKSİT PARTİKÜL TAKVİYELİ YAPIŞTIRICILARLA BİRLEŞTİRİLMİŞ BAĞLANTILARIN MEKANİK ÖZELLİKLERİNİN DENEYSEL OLARAK BELİRLENMESİ , AKPINAR SALİH, Yayın Yeri:Niğde Üniversitesi Mühendislik Bilimleri Dergisi ,2016, , 2016

A review on non electro nanofibre spinning techniques , Stojanovska Elena,CANBAY EMİNE,PAMPAL ESRA ŞERİFE,ÇALIŞIR MEHMET DURMUŞ,Ağma Onur,POLAT YUSUF,ŞİMŞEK RAMAZAN,Gündoğdu Serhat,AKGÜL YASİN,KILIÇ ALİ, Yayın Yeri:RSC Adv. ,2016, , 2016

A New Design for Maximum Conformity of Total Knee Prosthesis to Femur and Tibia , KORKMAZ İSMAİL HAKKI,KAYMAZ İRFAN,YILDIRIM ÖMER SELİM, Yayın Yeri:Journal of Long-Term Effects of Medical Implants ,2016, , 2016

Vakum Pompaları , BÜLBÜL FERHAT,SOMAIYEH JAFARPOUR, Yayın Yeri:Ordu Üniversitesi Bilim ve Teknoloji Dergisi ,2015, , 2015

Using of artificial neural network for the prediction of tribological properties of plasma nitrided 316L stainless steel , YETİM ALİ FATİH,ÇODUR MUHAMMED YASİN,YAZICI MUSTAFA, Yayın Yeri:Materials Letters ,2015, , 2015

Tribocorrosion properties of different type titanium alloys in simulated body fluid , HACISALİHOĞLU İLYAS,SAMANCIOĞLU AHMET,YILDIZ FATİH,PÜRÇEK GENÇAĞA,ALSARAN AKGÜN, Yayın Yeri:Wear ,2015, , 2015

The effect of post aging on wear properties of a plasma nitrided ferromagnetic steel under DC magnetic field , YETİM ALİ FATİH,KOVACI HALİM,YILDIZ FATİH,BAYRAK ÖZGÜ,ÇELİK AYHAN, Yayın Yeri:WEAR ,2015, , 2015

The effect of plasma nitriding temperature on the electrochemical and semiconducting properties of thin passive films formed on 316L stainless steel implant material in SBF solution , YAZICI MUSTAFA,ÇOMAKLI ONUR,YETİM TUBA,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Surface and Coatings Technology ,2015, , 2015

The Effect of Moment and Flexural Rigidity of Adherend on the Strength of Adhesively Bonded Single Lap Joints , GÜLTEKİN KÜRŞAT,AKPINAR SALİH,ÖZEL ADNAN, Yayın Yeri:The Journal of Adhesion ,2015, , 2015

Preparation and characterization of electroless Ni B nano SiO2 Al2O3 TiO2and CuO composite coatings , EKMEKCİ DURSUN,BÜLBÜL FERHAT, Yayın Yeri:Bulletin of Materials Science ,2015, , 2015

Numerical investigation of mechanical effects caused by various fixation positions on a new radius intramedullary nail , ÇELİK AYHAN,KOVACI HALİM,Gürsel Saka,KAYMAZ İRFAN, Yayın Yeri:Computer Methods in Biomechanics and Biomedical Engineering ,2015, , 2015

Ni B Coating Production on Magnesium Alloy by Electroless Deposition , BÜLBÜL FERHAT, Yayın Yeri:International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering ,2015, , 2015

Microscopic examination of play worn steel music strings , BÜLBÜL FERHAT, Yayın Yeri:Friction And Wear Research ,2015, , 2015

KAYMA YÜKÜNE MARUZ YAPIŞTIRMA BAĞLANTILARINDANYAPISAL YAPIŞTIRICILARIN MEKANİK ÖZELLİKLERİNİNBELİRLENMESİ , AYDIN MURAT DEMİR,AKPINAR SALİH,ÖZEL ADNAN,ERDOĞAN SADIK, Yayın Yeri:Mühendis ve Makina ,2015, , 2015

Investigation of Play Wear Damage on Steel Music Strings Using Atomic Force Microscope and Low Level Resistance Method , BÜLBÜL FERHAT,KARACALI TEVHİT, Yayın Yeri:Savart Journal - Science And Technology Of Stringed Musical Instruments ,2015, , 2015

Design of a multiple model switching controller for ABS braking dynamics , DOUSTİ MORTEZA,BAŞLAMIŞLI SELAHATTİN ÇAĞLAR,ÖNDER ERAY TEOMAN,SOLMAZ SELİM, Yayın Yeri:Transactions of the Institute of Measurement and Control ,2015, , 2015

Controlling spark timing for consecutive cycles to reduce the cyclic variations of SI engines , KALELİ ALİRIZA,CEVİZ MEHMET AKİF,ERENTÜRK KÖKSAL, Yayın Yeri:Applied Thermal Engineering ,2015, , 2015

Controlling LPG temperature for SI engine applications , CEVİZ MEHMET AKİF,KALELİ ALİRIZA,GÜNER ERDOĞAN, Yayın Yeri:Applied Thermal Engineering ,2015, , 2015

An Experimental Study on Heat Transfer and Pressure Drop of CuO-Water Nanofluid , ŞAHİN BAYRAM,MANAY EYÜPHAN,AKYÜREK EDA FEYZA, Yayın Yeri:Journal of Nanomaterials ,2015, , 2015

A low temperature in situ crystalline TiNi shape memory thin film deposited by magnetron sputtering , ÇİÇEK HİKMET,EFEOĞLU İHSAN,TOTİK YAŞAR,EZİRMİK KADRİ VEFA,ARSLAN ERSİN, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2015, , 2015

Wear resistance and non magnetic layer formation on 316L implant material with plasma nitriding , YETİM ALİ FATİH,YAZICI MUSTAFA, Yayın Yeri:Journal of Bionic Engineering ,2014, , 2014

Wear Behavior of Plasma Oxidized CoCrMo Alloy under Dry and Simulated Body Fluid Conditions , ÇELİK AYHAN,ASLAN MEVRA,YETİM ALİ FATİH,BAYRAK ÖZGÜ, Yayın Yeri:Journal of Bionic Engineering ,2014, , 2014

The strength of the adhesively bonded step lap joints for different step numbers , AKPINAR SALİH, Yayın Yeri:Composites Part B: Engineering ,2014, , 2014

The effect of the adherend width on the strength of adhesively bonded single lap joint Experimental and numerical analysis , GÜLTEKİN KÜRŞAT,AKPINAR SALİH,ÖZEL ADNAN, Yayın Yeri:Composites Part B: Engineering ,2014, , 2014

The effect of nitrogen flow rate on TiBN coatings deposited on cold work tool steel , ÇİÇEK HİKMET,BARAN ÖZLEM,ŞÜKÜROĞLU EBRU EMİNE,TOTİK YAŞAR,EFEOĞLU İHSAN,tahmasebian mortaza, Yayın Yeri:Journal of Adhesion Science and Technology ,2014, , 2014

Sert ve Yumuşak Kaplamalar , BÜLBÜL FERHAT, Yayın Yeri:Ordu Üniv. Bil. Tek. Derg ,2014, , 2014

Plazma Nitrokarbürleme , KARAKAN MEHMET,ALSARAN AKGÜN,ÇELİK AYHAN,YETİM ALİ FATİH, Yayın Yeri:MakinaTek ,2014, , 2014

PERFORMANCE OF PLASMA SPRAYED Al2O3 COATINGIN BIO SIMULATED ENVIRONMENT , Fatih YILDIZ, Ali Fatih YETİM, Akgün ALSARAN, Ayhan ÇELİK, Yayın Yeri:Metal Science and Heat Treatment ,2014, , 2014

Performance of plasma sprayed Al2O3 coating in bio simulated environment , YILDIZ FATİH,YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:Metal Science and Heat Treatment ,2014, , 2014

Kişiye Özel ve Geleneksel Tibial Diz Protezi Bileşenlerinin Performans Analizi , KORKMAZ İSMAİL HAKKI,KAYMAZ İRFAN,YILDIRIM ÖMER SELİM, Yayın Yeri:Süleyman Demirel Üniversitesi Fen Bilimler Enstitüsü Dergisi ,2014, , 2014

Investigation of the friction and wear properties of Ti TiB2 MoS2 graded composite coatings deposited by CFUBMS under air and vacuum conditions , BARAN ÖZLEM,Faruk Bidev,ÇİÇEK HİKMET,Kara Levent,EFEOĞLU İHSAN,KÜÇÜKÖMEROĞLU TEVFİK, Yayın Yeri:Surface and Coatings Technology ,2014, , 2014

Failure analysis of the cement mantle in total hip arthroplasty with an efficient probabilistic method , KAYMAZ İRFAN,BAYRAK ÖZGÜ,KARSAN ORHAN,ÇELİK AYHAN, Yayın Yeri:Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine ,2014, , 2014

Effect of Heat Treatment on Structure Of Electroless Ni B Coated Pure Titanium , BÜLBÜL FERHAT,ÇELİK İLHAN, Yayın Yeri:Journal of the Faculty of Engineering and Architecture of Gazi University ,2014, , 2014

Edge length effect of bluff bodies on flow structure , MANAY EYÜPHAN,ÖZCEYHAN VEYSEL,ŞAHİN BAYRAM,GÜNEŞ SİBEL, Yayın Yeri:International journal of Automotive and Mechanical Engineering ,2014, , 2014

CoCrMo İMPLANT ALAŞIMININ PLAZMA OKSİDASYONİŞLEMİ İLE AŞINMA DİRENCİNİN İYİLEŞTİRİLMESİ , Ali Fatih YETİM, Mevra ARSLAN, Fatih YILDIZ, İlyas HACISALİHOĞLU, Özgü BAYRAK, Yayın Yeri:Mühendis ve Makina ,2014, , 2014

Tribological Properties of WC 12Co Coating onAZ91 Magnesium Alloy Fabricated by High VelocityOxy Fuel Spray , YILDIZ FATİH, Yayın Yeri:High Temperature Materials and Processes ,2013, , 2013

The effect of differentstrain energy functionson rubber fender Experiment and finiteelement simulation , YILDIZ FATİH, Yayın Yeri:Journal of Elastomers and Plastics ,2013, , 2013

The Effect of Composite Patches on the Failure of Adhesively Bonded Joints Under Bending Moment , AKPINAR SALİH, Yayın Yeri:Applied Composite Materials ,2013, , 2013

Plain and fretting fatigue behavior of Ti6Al4V alloy coated with TialN thin film , YILDIZ FATİH,YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:Tribology International ,2013, , 2013

Overall heat transfer enhancement of triangular obstacles , ŞAHİN BAYRAM,MANAY EYÜPHAN,ÖZCEYHAN VEYSEL, Yayın Yeri:International journal of Automotive and Mechanical Engineering ,2013, , 2013

Forced convective two phase flow analysis in a circular tube equipped with twisted tapes , ÖMEROĞLU GÖKHAN,ÇOMAKLI ÖMER,KARAGÖZ ŞENDOĞAN,MANAY EYÜPHAN, Yayın Yeri:Energy Education Science and Technology Part A: Energy Science and Research ,2013, , 2013

Experimental investigation of heat transfer and pressure drop characteristics of Al2O3 water nanofluid , ŞAHİN BAYRAM,GEDİK GÜLTEKİN GÜL,MANAY EYÜPHAN,KARAGÖZ ŞENDOĞAN, Yayın Yeri:Experimental Thermal and Fluid Science ,2013, , 2013

Evaluation of an electroless nickel boron Ni B coating on corrosion fatigue performance of ball burnished AISI 1045 steel , SADELER RECEP,çorak selçuk,ATASOY SELÇUK,BÜLBÜL FERHAT, Yayın Yeri:Kovove Materialy-Metallic Materials ,2013, , 2013

Effects of using vortex tubes on events during cold start of a direct injection diesel engine , çelik adem,CEVİZ MEHMET AKİF,YILMAZ MEHMET,ÖNER İLHAN VOLKAN,KARAGÖZ ŞENDOĞAN, Yayın Yeri:Journal of Renewable and Sustainable Energy ,2013, , 2013

Effects of laminate carbon epoxy composite patches on the strength of double strap adhesive joints Experimental and numerical analysis , AKPINAR SALİH, Yayın Yeri:Materials & Design ,2013, , 2013

Effects of Different Curvature Patches on the Strength of Double Strap Adhesive Joints , AKPINAR SALİH, Yayın Yeri:The Journal of Adhesion ,2013, , 2013

Effect of Magnetic Field on the Wear Properties of a Ferromagnetic Steel , YETİM ALİ FATİH,KOVACI HALİM,ASLAN MEVRA,ÇELİK AYHAN, Yayın Yeri:WEAR ,2013, , 2013

YAPIŞTIRICIYLA BİRLEŞTİRİLMİŞ T BAĞLANTI TİPİNİN İKİ VE ÜÇ BOYUTLU GERİLME ANALİZİ , AKPINAR SALİH,AYDIN MURAT DEMİR, Yayın Yeri:EÜFBED - Fen Bilimleri Enstitüsü Dergisi ,2012, , 2012

Tribological and corrosion behaviour of electroless Ni B coating possessing a blackberry like structure , BÜLBÜL FERHAT,ALTUN HİKMET,KÜÇÜK ÖZKAN,EZİRMİK KADRİ VEFA, Yayın Yeri:Metals and Materials International ,2012, , 2012

The Prediction Of Heat Transfer And Fluid Characteristics For Equilateral Triangular Bodies In Tandem Arrangement By Artificial Neural Networks , MANAY EYÜPHAN,GÜNEŞ SİBEL,Akçadırcı Esra,ÖZCEYHAN VEYSEL,ÇAKIR UĞUR,ÇOMAKLI ÖMER, Yayın Yeri:Gazi University Journal of Science ,2012, , 2012

Stress Relief Solutions for Brittle TiB2 Coatings , BÜLBÜL FERHAT,EFEOĞLU İHSAN, Yayın Yeri:Surface Review and Letters ,2012, , 2012

Mini Vida Yerleştirilmiş Mandibulada Kortikal Kemik Kalınlığına Bağlı Olarak Gerilmelerin İncelenmesi , MEDETALİBEYOĞLU FATİH,KAYMAZ İRFAN,KORKMAZ İSMAİL HAKKI,DAĞSUYU İLHAN METİN,AKPINAR NESİMİ, Yayın Yeri:Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi ,2012, , 2012

MİKROKANALLARDA NANOAKIŞKANLARIN KULLANIMI , MANAY EYÜPHAN,ŞAHİN BAYRAM,AKYÜREK EDA FEYZA,ÇOMAKLI ÖMER, Yayın Yeri:MÜHENDİS VE MAKİNA ,2012, , 2012

Mikrokanallarda Nanoakıskanların Kullanımı , MANAY EYÜPHAN,ŞAHİN BAYRAM,AKYÜREK EDA FEYZA,ÇOMAKLI ÖMER, Yayın Yeri:MÜHENDİS VE MAKİNA ,2012, , 2012

Investigation of structural tribological and corrosion properties of electroless Ni B coating deposited on 316L stainless steel , BÜLBÜL FERHAT,ALTUN HİKMET,EZİRMİK KADRİ VEFA,KÜÇÜK ÖZKAN, Yayın Yeri:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology ,2012, , 2012

Investigation of Effect of Deposition Time in Electroless Ni B Coatings , BÜLBÜL FERHAT,ALTUN HİKMET,KÜÇÜK ÖZKAN, Yayın Yeri:Journal of Qafqaz University ,2012, , 2012

Engine performance exhaust emissions and cyclic variations in a lean burn SI engine fueled by gasoline hydrogen blends , CEVİZ MEHMET AKİF,Sen Asok K,Alp Kerem Küler,ÖNER İLHAN VOLKAN, Yayın Yeri:Applied Thermal Engineering ,2012, , 2012

Effect of protrusion at the ends of bondline in single lap joints under tension and bending , AKPINAR SALİH,TEMİZ ŞEMSETTİN,AYDIN MURAT DEMİR,ÖZEL ADNAN, Yayın Yeri:Journal of Adhesion Science and Technology ,2012, , 2012

CoCrMo İmplant Alaşımının Plazma oksidasyon İşlemi İle Aşınma Direncinin İyileştirilmesi , YETİM ALİ FATİH,ASLAN MEVRA,HACISALİHOĞLU İLYAS,YILDIZ FATİH,BAYRAK ÖZGÜ, Yayın Yeri:Mühendis ve Makina ,2012, , 2012

Çift Katmanlı Kemik Modeli İle Diz Protezi Dizilimi Eldesi Ve Sonlu Elemanlar Analizi İle Değerlendirilmesi , KORKMAZ İSMAİL HAKKI,KAYMAZ İRFAN,MEDETALİBEYOĞLU FATİH,YILDIRIM ÖMER SELİM, Yayın Yeri:Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi ,2012, , 2012

An improved response surface method for reliability analysis of structures , BAŞAĞA HASAN BASRİ,BAYRAKTAR ALEMDAR,KAYMAZ İRFAN, Yayın Yeri:Structural Engineering and Mechanics ,2012, , 2012

The effects of deposition parameters on surface morphology and crystallographic orientation of electroless Ni B coatings , BÜLBÜL FERHAT, Yayın Yeri:Metals and Materials International ,2011, , 2011

Fretting fatigue properties of plasma nitrided AISI 316L stainless steel Experiments and finite element analysis , YILDIZ FATİH,YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN,KAYMAZ İRFAN, Yayın Yeri:Tribology International ,2011, , 2011

Fretting fatigue properties of plasma nitrided AISI 316 L stainless steel Experiments and finite element analysis , YILDIZ FATİH,YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN,KAYMAZ İRFAN, Yayın Yeri:Tribology International ,2011, , 2011

Determination of cycle number for real in cylinder pressure cycle analysis in internal combustion engines , CEVİZ MEHMET AKİF,ÇAVUŞOĞLU BÜLENT,KAYA FERHAT,ÖNER İLHAN VOLKAN, Yayın Yeri:Energy ,2011, , 2011

Deposition and Adhesion Characterization of Ti BN MoS2 Based Composite Thin Films Prepared by Closed Field Unbalanced Magnetron Sputtering , YETİM ALİ FATİH,EFEOĞLU İHSAN,ÇELİK AYHAN,ALSARAN AKGÜN,KAYMAZ İRFAN, Yayın Yeri:ournal of Adhesion Science and Technology ,2011, , 2011

Corrosion behavior of Ti DLC deposition on pre nitrided 316L stainless steel and Ti6Al4V alloy , YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN,EFEOĞLU İHSAN, Yayın Yeri:Corrosion Engineering,Science and Technology ,2011, , 2011

Antibacterial activity of electroless Ni B coating , BÜLBÜL FERHAT, Yayın Yeri:Materials Science and Technology ,2011, , 2011

ANALYSIS OF THE THERMAL EFFICIENCY AND CYCLIC VARIATIONS IN A SI ENGINE UNDER LEAN COMBUSTION CONDITIONS , CEVİZ MEHMET AKİF, ÖNER İLHAN VOLKAN, KAYA FERHAT, KARACALI TEVHİT, Yayın Yeri:ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY ,2011, , 2011

Analysis of Combustion Stability and Its Relation to Performance Characteristics in a Compression Ignition Engine Fueled with Diesel-biodiesel Blends , CEVİZ MEHMET AKİF, Koncuk Fahri, KÜÇÜK ÖZKAN, GÖREN AHMET CEYHAN, YÜKSEL FİKRET, Yayın Yeri:ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS ,2011, , 2011

A Taguchi approach for optimization of design parameters in a tube with coiled wire inserts , GÜNEŞ SİBEL,MANAY EYÜPHAN,ŞENYİĞİT ERCAN,ÖZCEYHAN VEYSEL, Yayın Yeri:Applied Thermal Engineering ,2011, , 2011

The effect of TiC transient layer on a DLC based functionally gradient coating prepared by closed field unbalanced magnetron sputtering plating system , BÜLBÜL FERHAT,EFEOĞLU İHSAN, Yayın Yeri:Metals and Materials International ,2010, , 2010

Numerical Analysis of Heat Transfer and Pressure Drop in a Channel Equipped with Triangular Bodies in Side By Side Arrangement , MANAY EYÜPHAN,GÜNEŞ SİBEL,Akçadırcı Esra,ÖZCEYHAN VEYSEL, Yayın Yeri:The Online Journal on Power and Energy Engineering ,2010, , 2010

Multipass scratch test behaviour of TiAlN thinfilm deposited on 316L stainless steel andTi6Al4V alloy with dc biased and pulsedmagnetron sputtering , YILDIZ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN,EFEOĞLU İHSAN, Yayın Yeri:Surface Engineering ,2010, , 2010

Multi pass scratch test behavior of modified layer formed during plasma nitriding , YILDIZ FATİH,ALSARAN AKGÜN, Yayın Yeri:Tribology International ,2010, , 2010

MoS2 Ti composite films having 002 orientation and low Ti content , BÜLBÜL FERHAT,EFEOĞLU İHSAN, Yayın Yeri:Crystallography Reports ,2010, , 2010

Investigation of wear behavior of titanium oxide films produced by anodic oxidation on commercially pure titanium in vacuum conditions , YETİM ALİ FATİH, Yayın Yeri:SURFACE & COATINGS TECHNOLOGY ,2010, , 2010

Investigation of Tribological and Electrochemical Properties of Dual Layer After Low Temperature Plasma Carbo nitriding , YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:Surface Engineering ,2010, , 2010

Improving tribological properties of Ti6Al4V alloy with duplex surface treatment , YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2010, , 2010

Fatigue life determination of plasma nitrided medical grade CoCrMo alloy , BAYRAK ÖZGÜ,YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:Fatigue & Fracture of Engineering Materials & Structures ,2010, , 2010

Design of a new SI engine intake manifold with variable length plenum , CEVİZ MEHMET AKİF,akın mustafa, Yayın Yeri:Energy Conversion and Management ,2010, , 2010

Characterization of Ti CN a C films prepared by pulsed dc bias sputtering , BÜLBÜL FERHAT,EFEOĞLU İHSAN, Yayın Yeri:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology ,2010, , 2010

Yüzey Özelliklerinin Araştırılmasında Kullanılan yöntemler , BÜLBÜL FERHAT, Yayın Yeri:Metal Dünyası ,2009, , 2009

Wear and corrosion behaviour of various surface treated medical grade titaniumalloy in bio simulated environment , YILDIZ FATİH,YETİM ALİ FATİH,ALSARAN AKGÜN,EFEOĞLU İHSAN, Yayın Yeri:Wear ,2009, , 2009

Wear and Corrosion Behaviour of Various Surface Treated Medical Grade Titanium Alloy in Bio simulated Environment , YILDIZ FATİH,YETİM ALİ FATİH,ALSARAN AKGÜN,EFEOĞLU İHSAN, Yayın Yeri:WEAR ,2009, , 2009

Telli Çalgılarda Kullanılan Tellerde Aşınma Mekanizması , BÜLBÜL FERHAT, Yayın Yeri:Makine Teknolojileri Elektronik Dergisi ,2009, , 2009

Several Plasma Diffusion Processes for Improving Wear Properties of Ti6Al4V Alloy , YETİM ALİ FATİH,YILDIZ FATİH,VANGÖLÜ SEBAHATTİN YENAL,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:WEAR ,2009, , 2009

Plazma Kavramına Dair , BÜLBÜL FERHAT, Yayın Yeri:Kastamonu Eğitim Dergisi ,2009, , 2009

Plazma ile nitrürleme ve mangan fosfat kaplama işleminin AISI 5140 çeliğinin aşınma davranışı üzerine etkisi , TOTİK YAŞAR,ALSARAN AKGÜN,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Mühendis ve Makina ,2009, , 2009

Günümüz Teknik Resim Bilgisinin Temellerini Oluşturan Tarihi İlk Adımlar , BÜLBÜL FERHAT, Yayın Yeri:Makine İhtisas ,2009, , 2009

Cooling of a cpu with heat pipes using different refrigeration fluids , KOTCİOĞLU İSAK,ÇALIŞKAN SİNAN,MANAY EYÜPHAN, Yayın Yeri:Journal of Thermal Science and Technology ,2009, , 2009

Characterization of size quantized PbTe thin films synthesized by an electrochemical co deposition method , ERDOĞAN İBRAHİM YASİN,ÖZNÜLÜER TUBA,BÜLBÜL FERHAT,DEMİR ÜMİT, Yayın Yeri:Thin Solid Films ,2009, , 2009

Tribological Characteristics of MoS2 Nb solid lubricant film in different tribo test conditions , EFEOĞLU İHSAN,BARAN ÖZLEM,YETİM ALİ FATİH,ALTINTAŞ SABRİ, Yayın Yeri:Surface and CoatingTechnology ,2008, , 2008

Surface modification of 316L stainless steel with plasma nitriding , YILDIZ FATİH,YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:KOVOVE MATERIALY-METALLIC MATERIALS ,2008, , 2008

Plasma nitriding behavior of Ti6Al4V orthopedic alloy , YILDIZ FATİH,YETİM ALİ FATİH,ALSARAN AKGÜN,ÇELİK AYHAN, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2008, , 2008

Müzik Çalgıları da Bir Makinedir, Tipik Bir Örnek Olarak Bağlama Telli Çalgısı ve Unsurları , BÜLBÜL FERHAT, Yayın Yeri:Makine İhtisas ,2008, , 2008

Malzeme ve Yüzey Mühendisliği , BÜLBÜL FERHAT, Yayın Yeri:Metal Dünyası ,2008, , 2008

Kendinden Yağlayıcı, Sert, Aşınmaya Dirençli MoS2 Esaslı Kaplamalar Kullanmanın Avantajları (Çeviri) , BÜLBÜL FERHAT, Yayın Yeri:Mühendis ve Makina ,2008, , 2008

Elmas Benzeri Karbon ve Uygulama Alanları , BÜLBÜL FERHAT, Yayın Yeri:Machinery Makine Tek ,2008, , 2008

Elektriksiz Ni-B Kaplamalar , BÜLBÜL FERHAT,ALTUN HİKMET,KÜÇÜK ÖZKAN, Yayın Yeri:Metal Makina ,2008, , 2008

Effects of plasma nitriding on mechanical and tribological properties of CoCrMo alloy , ÇELİK AYHAN,BAYRAK ÖZGÜ,ALSARAN AKGÜN,KAYMAZ İRFAN,YETİM ALİ FATİH, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2008, , 2008

Effect of Plasma Nitrocarburizing on Fatigue Behavior of AISI 1020 Steel , KARAKAN MEHMET,YETİM ALİ FATİH,ÇELİK AYHAN,ALSARAN AKGÜN, Yayın Yeri:Kovove Materialy ,2008, , 2008

A comparative study the effect of surface treatments on the tribological properties of Ti 6Al 4V alloy , YETİM ALİ FATİH,ALSARAN AKGÜN,EFEOĞLU İHSAN,ÇELİK AYHAN, Yayın Yeri:SURFACE COATINGS TECHNOLOGY ,2008, , 2008

The effect of bias voltage and working pressure on S Mo ratio at MoS2 Ti composite films , BÜLBÜL FERHAT,EFEOĞLU İHSAN,ARSLAN ERSİN, Yayın Yeri:Applied Surface Science ,2007, , 2007

Sıcaklık Destekli Kimyasal Yüzey İşlemleri , BÜLBÜL FERHAT, Yayın Yeri:Metal Dünyası ,2007, , 2007

Reliability based design optimization for elastoplastic mechanical structures , Kaymaz Irfan, Marti Kurt, Yayın Yeri:Computers & Structures ,2007, , 2007

MoS2-Ti Kompozit Katı Yağlayıcı Filmlerin Mikroyapı ve Tribolojik Özelliklerinin Belirlenmesi (Çeviri) , BÜLBÜL FERHAT, Yayın Yeri:Machinery Makine Tek ,2007, , 2007

Malzemelerde Yüzey Hasarı , BÜLBÜL FERHAT, Yayın Yeri:Metalurji Malzeme ,2007, , 2007

Katılarda Yayınma , BÜLBÜL FERHAT, Yayın Yeri:Metal Dünyası, ,2007, , 2007

Katı Yağlayıcılar , BÜLBÜL FERHAT, Yayın Yeri:Metalurji Malzeme ,2007, , 2007

Intake plenum volume and its influence on the engine performance cyclic variability and emissions , CEVİZ MEHMET AKİF, Yayın Yeri:Energy Conversion and Management ,2007, , 2007

İnce Filmlerin Büyüme Biçimleri , BÜLBÜL FERHAT, Yayın Yeri:Metal Dünyası ,2007, , 2007

Fatigue behaviour of duplex treated AISI316L stainless steel , ÇELİK AYHAN,YETİM ALİ FATİH,EFEOĞLU İHSAN, Yayın Yeri:Kovove Materialy ,2007, , 2007

Darbeli Manyetik Alanda Sıçratma ile Üretilen Neme Dirençli MoSx Filmler (Çeviri) , BÜLBÜL FERHAT, Yayın Yeri:Mühendis ve Makina ,2007, , 2007

Bir Doğal Kompozit Malzeme: Diş , BÜLBÜL FERHAT, Yayın Yeri:Makine Teknolojileri Elektronik Dergisi ,2007, , 2007

Aşınma Türleri , BÜLBÜL FERHAT, Yayın Yeri:Metal Dünyası ,2007, , 2007

Reliability analysis for elastoplastic mechanical structures under stochastic uncertainty , Marti K., Kaymaz I., Yayın Yeri:ZAMM ,2006, , 2006

Effects of post aging on wear and corrosion properties ofnitrided AISI 4140 steel , ALSARAN AKGÜN,YILDIZ FATİH,ÇELİK AYHAN, Yayın Yeri:Surface and Coatings Technology ,2006, , 2006

Cyclic variations on LPG and gasoline fuelled lean burn SI engine , CEVİZ MEHMET AKİF,YÜKSEL FİKRET, Yayın Yeri:Renewable Energy ,2006, , 2006

Comparison of microstructure and tribological behaviour of plasma nitrided and nitrocarburized AISI 4140 steel , KARAKAN MEHMET,YETİM ALİ FATİH,ÇELİK AYHAN, Yayın Yeri:Kovove Materialy, ,2006, , 2006

The effect of deposition parameters and Ti content on structural and wear properties of MoS2Ti coatings , ARSLAN ERSİN,BÜLBÜL FERHAT,ALSARAN AKGÜN,ÇELİK AYHAN,EFEOĞLU İHSAN, Yayın Yeri:Wear ,2005, , 2005

Temperature and air-fuel ratio dependent specific heat ratio functions for lean burned and unburned mixture , CEVİZ MEHMET AKİF, KAYMAZ İRFAN, Yayın Yeri:Energy Conversion and Management ,2005, , 2005

Temperature and air fuel ratio dependent specific heat ratio functions for lean burned and unburned mixture , CEVİZ MEHMET AKİF,KAYMAZ İRFAN, Yayın Yeri:Energy Conversion and Management ,2005, , 2005

Effects of ethanol unleaded gasoline blends on cyclic variability and emissions in an SI engine , CEVİZ MEHMET AKİF,YÜKSEL FİKRET, Yayın Yeri:Applied Thermal Engineering ,2005, , 2005

Effect of Magnetic Treatment on Fatigue Life of AISI 4140 Steel , ÇELİK AYHAN,YETİM ALİ FATİH,ALSARAN AKGÜN,KARAKAN MEHMET, Yayın Yeri:Materials and Design ,2005, , 2005

Effect of crystallographic orientation on the friction and wear properties of MoxSy Ti coatings by pulsed dc in nitrogen and humid air , EFEOĞLU İHSAN,BÜLBÜL FERHAT, Yayın Yeri:Wear ,2005, , 2005

Application of kriging method to structural reliability problems , KAYMAZ İRFAN, Yayın Yeri:Structural Safety ,2005, , 2005

A response surface method based on weighted regression for structural reliability analysis , KAYMAZ İRFAN,Mcmahon Chris, Yayın Yeri:Probabilistic Engineering Mechanics ,2005, , 2005

The Structural and Tribological Properties of MoS2 Ti Composite Solid Lubricants , ARSLAN ERSİN,BÜLBÜL FERHAT,EFEOĞLU İHSAN, Yayın Yeri:Tribology Transactions ,2004, , 2004

Improvements of fatigue behaviour in 2014 Al alloy by solution heat treating and age hardening , Sadeler R., Totik Y., Gavgalı M., Kaymaz I., Yayın Yeri:Materials & Design ,2004, , 2004

A repair process of fatigue damage with plasma nitriding , ALSARAN AKGÜN,KAYMAZ İRFAN,ÇELİK AYHAN,YETİM ALİ FATİH,KARAKAN MEHMET, Yayın Yeri:Surface and CoatingTechnology ,2004, , 2004

A repair process for fatigue damage using plasma nitriding , Alsaran Akgün, Kaymaz Irfan, Çelik Ayhan, Yetim Fatih, Karakan Mehmet, Yayın Yeri:Surface and Coatings Technology ,2004, , 2004

A probabilistic design system for reliability based design optimization , Kaymaz I., McMahon C.A., Yayın Yeri:Structural and Multidisciplinary Optimization ,2004, , 2004

Yüzey mühendisliğinde yeni bir yaklaşım dubleks yüzey işlemi , ALSARAN AKGÜN,ÇELİK AYHAN,KARAKAN MEHMET,YETİM ALİ FATİH, Yayın Yeri:Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi ,2003, , 2003

Thermal balance of a four stroke SI engine operating on hydrogen as a supplementary fuel , YÜKSEL FİKRET,CEVİZ MEHMET AKİF, Yayın Yeri:Energy ,2003, , 2003

Study on compound layer formed during plasma nitrocarburizing of AISI 5140 steel , ALSARAN AKGÜN,KARAKAN MEHMET,ÇELİK AYHAN,BÜLBÜL FERHAT,EFEOĞLU İHSAN, Yayın Yeri:Journal of Materials Science Letters ,2003, , 2003

Elemental Analysis of the Ashes of Main Thermal Power Plants in Turkey , NUHOĞLU YAŞAR,BÜLBÜL FERHAT, Yayın Yeri:Journal of Trace and Microprobe Techniques ,2003, , 2003

Hava Yönlendirici Güneş Kollektörleri , ÇOMAKLI ÖMER,YÜKSEL BEDRİ,YÜKSEL FİKRET, Yayın Yeri:Mühendis ve Makina ,1994, , 1994

The investigation of hot workability of AA 6063 SiC composites withdifferent SiC particulate volume fraction , Totik Y , Sadeler R , Gavgali M , Kaymaz I, Yayın Yeri:SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS ,1900, , 1900

The effect of the microsructural difference between surface and centeron the hot workability of AA 6063 homogenized ingot , Totik Y , Gavgali M , Sadeler R , Kaymaz I, Yayın Yeri:JOURNAL OF ADVANCED MATERIALS ,1900, , 1900

Fatigue Behavior of X40CrMoV 51 at High Temperatures , Yesildal Ruhi, Sen Sadri, Kaymaz Irfan, Yayın Yeri:Journal of Materials Engineering and Performance ,1900, , 1900